hedgewars: comparison misc/libfreetype/docs/CHANGES

equal deleted inserted replaced

-:a501f5ec7b34
+:0f5961910e27
-CHANGES BETWEEN 2.4.4 and 2.4.5
-I. IMPORTANT BUG FIXES
-- A rendering regression  for second-order Bézier curves  has been
-fixed, introduced in 2.4.3.
-II. IMPORTANT CHANGES
-- If autohinting  is not  explicitly disabled,  FreeType now  uses
-the autohinter if  a TrueType based font doesn't  contain native
-hints.
-- The load flag FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH  has been made
-redundant and  is simply ignored;  this means that FreeType  now
-ignores the global advance width value in TrueType fonts.
-III. MISCELLANEOUS
-- `FT_Sfnt_Table_Info' can now return the number of SFNT tables of
-a font.
-- Support for PCF files compressed with bzip2 has been contributed
-by Joel  Klinghed.  To  make this  work, the  OS must  provide a
-bzip2 library.
-- Bradley  Grainger  contributed  project  and  solution  files in
-Visual Studio 2010 format.
-- Again some fixes to better handle broken fonts.
-- Some improvements to the B/W rasterizer.
-- Fixes to the cache module to improve robustness.
-======================================================================
-CHANGES BETWEEN 2.4.3 and 2.4.4
-I. IMPORTANT BUG FIXES
-- UVS support (TrueType/OpenType cmap format 14) support is fixed.
-This regression has been introduced in version 2.4.0.
-II. MISCELLANEOUS
-- Detect tricky fonts (e.g. MingLiU)  by the lengths and checksums
-of Type42-persistent subtables (`cvt ', `fpgm', and `prep') when
-a TrueType font without family name is given.  The previous fix,
-introduced in 2.4.3,  was too rigorous,  causing many  subsetted
-fonts (mainly  from PDF files) displayed badly  because FreeType
-forced  rendering with  the TrueType bytecode engine  instead of
-the autohinter.
-- Better support for 64bit platforms.
-- More fixes to improve handling of broken fonts.
-======================================================================
-CHANGES BETWEEN 2.4.2 and 2.4.3
-I. IMPORTANT BUG FIXES
-- Fix rendering of certain cubic, S-shaped arcs.   This regression
-has been introduced in version 2.4.0.
-II. MISCELLANEOUS
-- To  fix  the  above  mentioned  rendering  issue,  a  new spline
-flattening algorithm  has been  introduced which  speeds up both
-conic and cubic arcs.
-- Handling of broken fonts has been further improved.
-======================================================================
-CHANGES BETWEEN 2.4.1 and 2.4.2
-I. IMPORTANT BUG FIXES
-- A stack overflow in CFF Type2 CharStrings interpreter is fixed.
-- Handling Type 42 font deallocation was broken; additionally, the
-library is now more robust against malformed Type 42 fonts.
-II. MISCELLANEOUS
-- Two new functions,  `FT_Reference_Library' (in FT_MODULE_H)  and
-`FT_Reference_Face'  (in  FT_FREETYPE_H),  have  been  added  to
-simplify life-cycle management.  A counter gets initialized to 1
-at the  time an  FT_Library (or  FT_Face) structure  is created.
-The  two  new   functions  increment  the  respective   counter.
-`FT_Done_Library' and `FT_Done_Face' then only destroy a library
-or face if the counter is 1, otherwise they simply decrement the
-counter.
-======================================================================
-CHANGES BETWEEN 2.4.0 and 2.4.1
-I. IMPORTANT CHANGES
-- A serious bug in the  CFF font module prevented  display of many
-glyphs in CFF fonts like `MinionPro-Regular.otf'.
-======================================================================
-CHANGES BETWEEN 2.3.12 and 2.4.0
-I. IMPORTANT CHANGES
-- Since May  2010, all  patents  regarding  the TrueType  bytecode
-interpreter have expired worldwide.  Consequently, we now define
-TT_CONFIG_OPTION_BYTECODE_INTERPRETER by  default (and  undefine
-TT_CONFIG_OPTION_UNPATENTED_HINTING).
-- A new function `FT_Library_SetLcdFilterWeights' is available  to
-adjust the filter weights set by `FT_Library_SetLcdFilter'.
-II. MISCELLANEOUS
-- Thanks to many reports from Robert Święcki, FreeType's stability
-in handling broken or damaged fonts is much improved.
-- Support  for LCD  filter  control has  been  added to  the  demo
-programs `ftdiff' and `ftview'.
-======================================================================
-CHANGES BETWEEN 2.3.11 and 2.3.12
-I. IMPORTANT CHANGES
-- For  `FT_Open_Face',  new  parameters  are  available  to ignore
-preferred family names: FT_PARAM_TAG_IGNORE_PREFERRED_FAMILY and
-FT_PARAM_TAG_IGNORE_PREFERRED_SUBFAMILY.
-II. MISCELLANEOUS
-- Support  for  incremental  font  loading  (controlled  with  the
-FT_CONFIG_OPTION_INCREMENTAL macro) is now active by default.
-- Better support for vertical metrics.
-- Various minor bug fixes.
-======================================================================
-CHANGES BETWEEN 2.3.10 and 2.3.11
-I. IMPORTANT BUG FIXES
-- Version 2.3.10 broke PCF support.
-======================================================================
-CHANGES BETWEEN 2.3.10 and 2.3.9
-I. IMPORTANT BUG FIXES
-- If all  ASCII digits in a  font have the  same (unscaled) width,
-the autohinter respects this and won't change it.
-- TrueType fonts  are now  rasterized correctly  if the horizontal
-and vertical resolution differ.
-- Type 1 fonts are now handled with increased precision internally
-to avoid serious rounding issues if non-integral coordinates are
-encountered.
-- Horizontally  condensed CFF  fonts (using the font  matrix) were
-rendered  incorrectly.   This  bug  has  been  introduced  after
-release 2.3.5.
-II. IMPORTANT CHANGES
-- Support for the SFNT cmap 13 table format (as defined by the new
-OpenType 1.6 specification) has been added.
-- B/W rasterization  of well-hinted TrueType  fonts at small sizes
-has been greatly improved.
-- Calculation  of  vertical  metrics in  OpenType  fonts has  been
-improved.
-III. MISCELLANEOUS
-- It  is now  possible to  change  the emboldening  factor in  the
-`ftview' demo program with keys `e' and `E'.
-- It is  now possible  to change the  slant value in  the `ftview'
-demo program with keys `s' and `S'.
-- The  5-levels  grayscale  mode of  the `ftraster'  module (which
-FreeType doesn't use by default) was broken since version 2.3.0.
-- Compilation of the  `ftgrays' and `ftraster' modules  was broken
-in stand-alone mode.
-- Various fixes for compilation on 64bit and 16bit architectures.
-======================================================================
-CHANGES BETWEEN 2.3.9 and 2.3.8
-I. IMPORTANT BUG FIXES
-- Very unfortunately, FreeType 2.3.8 contained a change that broke
-its  official ABI.  The  end result  is  that programs  compiled
-against previous versions of the library, but dynamically linked
-to  2.3.8 can  experience  memory corruption  if  they call  the
-`FT_Get_PS_Font_Info' function.
-We recommend all users to  upgrade to 2.3.9 as soon as possible,
-or to downgrade to a previous  release of the library if this is
-not an option.
-The  origin of the  bug is  that a  new field  was added  to the
-publicly  defined  `PS_FontInfoRec'  structure.   Unfortunately,
-objects of this  type can be stack or  heap allocated by callers
-of   `FT_Get_PS_Font_Info',  resulting   in   a  memory   buffer
-overwrite with its implementation in 2.3.8.
-If  you want to  know whether  your code  is vulnerable  to this
-issue,  simply  search  for  the  substrings  `PS_FontInfo'  and
-`PS_Font_Info' in your source code.  If none is found, your code
-is safe and is not affected.
-The FreeType team apologizes for the problem.
-- The POSIX support  of MacOS resource-fork fonts  (Suitcase fonts
-and LaserWriter Type1 PostScript fonts) was broken in 2.3.8.  If
-FreeType2 is built without Carbon framework, these fonts are not
-handled correctly.  Version 2.3.7 didn't have this bug.
-- `FT_Get_Advance' (and `FT_Get_Advances') returned bad values for
-almost all font formats except TrueType fonts.
-- Fix a bug  in the SFNT  kerning table  loader/parser which could
-crash the engine if certain malformed tables were encountered.
-- Composite SFNT bitmaps are now handled correctly.
-II. IMPORTANT CHANGES
-- The   new  functions   `FT_Get_CID_Is_Internally_CID_keyed'  and
-`FT_Get_CID_From_Glyph_Index'  can be  used to  access CID-keyed
-CFF fonts  via CID  values.  This code  has been  contributed by
-Michael Toftdal.
-III. MISCELLANEOUS
-- `FT_Outline_Get_InsideBorder'  returns   FT_STROKER_BORDER_RIGHT
-for empty outlines.  This was incorrectly documented.
-- The `ftview' demo program now supports UTF-8 encoded strings.
-======================================================================
-CHANGES BETWEEN 2.3.8 and 2.3.7
-I. IMPORTANT BUG FIXES
-- CID-keyed fonts in an SFNT wrapper were not handled correctly.
-- The smooth renderer produced truncated images (on the right) for
-outline parts with negative horizontal values.  Most fonts don't
-contain outlines left  to the y coordinate axis, but  the effect
-was very noticeable for outlines processed with FT_Glyph_Stroke,
-using thick strokes.
-- `FT_Get_TrueType_Engine_Type'  returned a  wrong  value if  both
-configuration  macros  TT_CONFIG_OPTION_BYTECODE_INTERPRETER and
-TT_CONFIG_OPTION_UNPATENTED_HINTING were defined.
-- The  `face_index'  field  in   the  `FT_Face'  structure  wasn't
-initialized properly after calling FT_Open_Face and friends with
-a positive face index for CFFs,  WinFNTs, and, most importantly,
-for TrueType Collections (TTCs).
-II. IMPORTANT CHANGES
-- Rudimentary support for Type 1  fonts and CID-keyed Type 1 fonts
-in an SFNT wrapper has been  added -- such fonts are used on the
-Mac.  The core  SFNT tables `TYP1' and `CID '  are passed to the
-PS Type 1  and CID-keyed PS font drivers;  other tables (`ALMX',
-`BBOX', etc.) are not supported yet.
-- A  new interface  to extract  advance values  of glyphs  without
-loading their outlines has been added.  The functions are called
-`FT_Get_Advance' and `FT_Get_Advances'; they are defined in file
-`ftadvanc.h' (to be accessed as FT_ADVANCES_H).
-- A new function `FT_Get_FSType_Flags' (in FT_FREETYPE_H) has been
-contributed  by   David  Bevan  to  access   the  embedding  and
-subsetting restriction information of fonts.
-III. MISCELLANEOUS
-- FT_MulFix is now an inlined function; by default, assembler code
-is provided for x86 and ARM.  See FT_CONFIG_OPTION_INLINE_MULFIX
-and FT_CONFIG_OPTION_NO_ASSEMBLER (in ftoption.h) for more.
-- The handling of `tricky' fonts  (this is, fonts which don't work
-with the  autohinter, needing the font  format's hinting engine)
-has been generalized and changed slightly:
-. A new  face flag  FT_FACE_FLAG_TRICKY indicates that  the font
-format's  hinting engine is  necessary for  correct rendering.
-The macro FT_IS_TRICKY can be used to check this flag.
-. FT_LOAD_NO_HINTING is now ignored for tricky fonts.  To really
-force  raw  loading  of  such fonts  (without  hinting),  both
-FT_LOAD_NO_HINTING  and FT_LOAD_NO_AUTOHINT  must  be used  --
-this is something which you probably never want to do.
-. Tricky  TrueType fonts  always use  the  bytecode interpreter,
-either the patented or unpatented version.
-- The  function  `FT_GlyphSlot_Own_Bitmap'  has  been  moved  from
-FT_SYNTHESIS_H to FT_BITMAP_H; it  is now part of the `official'
-API.   (The functions  in  FT_SYNTHESIS_H are  still subject  to
-change, however.)
-- In the  `ftdiff'  demo  program you  can now  toggle the  use of
-FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH with key `a'.
-======================================================================
-CHANGES BETWEEN 2.3.7 and 2.3.6
-I. IMPORTANT BUG FIXES
-- If the library  was compiled on an i386  platform using gcc, and
-compiler  option -O3 was  given, `FT_MulFix'  sometimes returned
-incorrect  results   which  could  have   caused  problems  with
-`FT_Request_Metrics'   and  `FT_Select_Metrics',   returning  an
-incorrect descender size.
-- Pure CFFs without  subfonts were scaled incorrectly  if the font
-matrix  was  non-standard.  This  bug  has  been  introduced  in
-version 2.3.6.
-- The  `style_name'  field  in  the  `FT_FaceRec'  structure often
-contained  a wrong  value for  Type 1  fonts.  This misbehaviour
-has been  introduced  in  version  2.3.6  while  trying  to  fix
-another   problem.   [Note,  however,   that   this   value   is
-informative only  since  the  used  algorithm to  extract  it is
-very simplistic.]
-II. IMPORTANT CHANGES
-- Two      new      macros,      FT_OUTLINE_SMART_DROPOUTS     and
-FT_OUTLINE_EXCLUDE_STUBS,  have been introduced.   Together with
-FT_OUTLINE_IGNORE_DROPOUTS (which  was ignored previously) it is
-now possible to control the dropout mode  of the `raster' module
-(for B&W rasterization),   using  the   `flags'  field   in  the
-`FT_Outline' structure.
-- The TrueType bytecode interpreter now passes the dropout mode to
-the B&W rasterizer.  This greatly increases the output for small
-ppem values of many fonts like `pala.ttf'.
-======================================================================
-CHANGES BETWEEN 2.3.6 and 2.3.5
-I. IMPORTANT BUG FIXES
-- A  bunch of  potential security  problems have  been found.  All
-users should update.
-- Microsoft  Unicode  cmaps  in  TrueType  fonts  are  now  always
-preferred over Apple cmaps.  This is not a bug per se, but there
-exist some buggy  fonts created for MS which  have broken  Apple
-cmaps.  This affects  only the automatic  selection of FreeType;
-it's always possible to manually select an Apple Unicode cmap if
-desired.
-- Many bug fixes to the TrueType bytecode interpreter.
-- Improved Mac support.
-- Subsetted CID-keyed CFFs are now supported correctly.
-- CID-keyed CFFs with subfonts which are scaled in a  non-standard
-way are now handled correctly.
-- A call to FT_Open_Face with `face_index' < 0 crashed FreeType if
-the font was a Windows (bitmap) FNT/FON.
-II. IMPORTANT CHANGES
-- The new function `FT_Get_CID_Registry_Ordering_Supplement' gives
-access to  those fields in a CID-keyed font.  The code  has been
-contributed by Derek Clegg.
-- George Williams  contributed  code  to validate  the new  `MATH'
-OpenType  table (within  the `otvalid'  module).  The  `ftvalid'
-demo program has been extended accordingly.
-- An API for cmap 14 support  (for Unicode Variant Selectors, UVS)
-has been contributed by George Williams.
-- A new face flag FT_FACE_FLAG_CID_KEYED has been added,  together
-with a macro FT_IS_CID_KEYED which evaluates to 1 if the font is
-CID-keyed.
-III. MISCELLANEOUS
-- Build support for symbian has been contributed.
-- Better WGL4 glyph name support, contributed by Sergey Tolstov.
-- Debugging output of the  various FT_TRACEX macros is now sent to
-stderr.
-- The `ftview' demo program now provides artificial slanting too.
-- The `ftvalid' demo  program has a new  option `-f' to select the
-font index.
-======================================================================
-CHANGES BETWEEN 2.3.5 and 2.3.4
-I. IMPORTANT BUG FIXES
-- Some subglyphs in TrueType fonts were handled incorrectly due to
-a missing graphics state reinitialization.
-- Large .Z files  (as distributed with some X11  packages) weren't
-handled correctly, making FreeType increase the heap stack in an
-endless loop.
-- A large  number of  bugs have  been fixed  to avoid  crashes and
-endless loops with invalid fonts.
-II. IMPORTANT CHANGES
-- The  two new  cache functions  `FTC_ImageCache_LookupScaler' and
-`FTC_SBit_Cache_LookupScaler' have been added to allow lookup of
-glyphs using an  `FTC_Scaler' object;  this makes it possible to
-use fractional pixel sizes in the cache.  The demo programs have
-been updated accordingly to use this feature.
-- A new API  `FT_Get_CMap_Format' has been added to  get the  cmap
-format  of a  TrueType font.   This  is useful  in handling  PDF
-files.  The code has been contributed by Derek Clegg.
-- The  auto-hinter  now  produces  better  output  by  default for
-non-Latin scripts  like Indic.   This was done by  using the CJK
-hinting module  as the default instead of the Latin one.  Thanks
-to Rahul Bhalerao for this suggestion.
-- A new API `FT_Face_CheckTrueTypePatents'  has been added to find
-out  whether  a  given  TrueType  font  uses  patented  bytecode
-instructions.   The  `ft2demos' bundle  contains a  new  program
-called `ftpatchk' which demonstrates its usage.
-- A  new  API  `FT_Face_SetUnpatentedHinting'  has  been  added to
-enable or disable the unpatented hinter.
-- Support for Windows FON files in PE format  has been contributed
-by Dmitry Timoshkov.
-III. MISCELLANEOUS
-- Vincent Richomme contributed Visual C++ project files for Pocket
-PCs.
-======================================================================
-CHANGES BETWEEN 2.3.4 and 2.3.3
-I. IMPORTANT BUG FIXES
-- A serious  bug  in  the  handling  of bitmap  fonts (and  bitmap
-strikes of outline fonts) has been introduced in 2.3.3.
-======================================================================
-CHANGES BETWEEN 2.3.3 and 2.3.2
-I. IMPORTANT BUG FIXES
-- Remove a serious regression in the TrueType bytecode interpreter
-that was introduced  in version 2.3.2.  Note that  this does not
-disable  the  improvements  introduced  to  the  interpreter  in
-version 2.3.2,  only some ill  cases that occurred  with certain
-fonts (though a few popular ones).
-- The auto-hinter now  ignores single-point contours for computing
-blue zones.   This bug  created `wavy' baselines  when rendering
-text  with  various  fonts  that  use these  contours  to  model
-mark-attach points  (these are points that  are never rasterized
-and are placed outside of the glyph's real outline).
-- The `rsb_delta' and `lsb_delta' glyph slot fields are now set to
-zero for mono-spaced fonts.  Otherwise code that uses them would
-essentially ruin the fixed-advance property.
-- Fix  CVE-2007-1351 which  can  cause an  integer overflow  while
-parsing  BDF fonts,  leading to  a potentially  exploitable heap
-overflow condition.
-II. MISCELLANEOUS
-- Fixed compilation issues on some 64-bit platforms (see ChangeLog
-for details).
-- A new demo  program `ftdiff' has been added  to compare TrueType
-hinting, FreeType's auto  hinting, and rendering without hinting
-in three columns.
-======================================================================
-CHANGES BETWEEN 2.3.2 and 2.3.1
-I. IMPORTANT BUG FIXES
-- FreeType  returned incorrect  kerning information  from TrueType
-fonts when the bytecode  interpreter was enabled.  This happened
-due to a typo introduced in version 2.3.0.
-- Negative  kerning  values  from   PFM  files  are  now  reported
-correctly  (they were read  as 16-bit  unsigned values  from the
-file).
-- Fixed  a small  memory leak  when `FT_Init_FreeType'  failed for
-some reason.
-- The Postscript hinter placed and sized very thin and ghost stems
-incorrectly.
-- The TrueType bytecode  interpreter has been fixed to  get rid of
-most of the  rare differences seen in comparison  to the Windows
-font loader.
-II. IMPORTANT CHANGES
-- The auto-hinter  now better deals  with serifs and  corner cases
-(e.g.,  glyph '9'  in Arial  at 9pt,  96dpi).  It  also improves
-spacing  adjustments and doesn't  change widths  for non-spacing
-glyphs.
-- Many   Mac-specific   functions   are  deprecated   (but   still
-available);  modern replacements  have been  provided  for them.
-See the documentation in file `ftmac.h'.
-======================================================================
-CHANGES BETWEEN 2.3.1 and 2.3.0
-I. IMPORTANT BUG FIXES
-- The TrueType interpreter sometimes returned incorrect horizontal
-metrics due to a bug in the handling of the SHZ instruction.
-- A typo  in  a  security  check  introduced  after  version 2.2.1
-prevented FreeType to render some glyphs in CFF fonts.
-======================================================================
-CHANGES BETWEEN 2.3.0 and 2.2.1
-I. IMPORTANT BUG FIXES
-- The  PCF font  loader  is  now much  more  robust while  loading
-malformed font files.
-- Various memory leaks have been found and fixed.
-- The TrueType name loader now deals properly with some fonts that
-encode their  names in UTF-16 (the specification  was vague, and
-the code incorrectly assumed UCS-4).
-- Fixed the TrueType bytecode  loader to deal properly with subtle
-monochrome/gray  issues  when   scaling  the  CVT.   Some  fonts
-exhibited bad rendering artifacts otherwise.
-- `FT_GlyphSlot_Embolden' now  supports vertical layouts correctly
-(it mangled the vertical advance height).
-- Fixed byte  endian issues  of `ftmac.c' to  support Mac OS  X on
-i386.
-- The  PFR  font loader  no  longer  erroneously  tags font  files
-without any outlines as FT_FACE_FLAG_SCALABLE.
-II. NEW API FUNCTIONS
-- `FT_Library_SetLcdFilter' allows you  to select a special filter
-to be  applied to the bitmaps generated  by `FT_Render_Glyph' if
-one of the FT_RENDER_MODE_LCD and FT_RENDER_MODE_LCD_V modes has
-been  selected.  This filter  is used  to reduce  color fringes;
-several  settings are  available  through the  FT_LCD_FILTER_XXX
-enumeration.
-Its  declaration   and  documentation  can  be   found  in  file
-`include/freetype/ftlcdfil.h'   (to  be   accessed   with  macro
-FT_LCD_FILTER_H).
-*IMPORTANT*:     This      function     returns     an     error
-(FT_Err_Unimplemented_Feature) in default  builds of the library
-for patent reasons.  See below.
-- `FT_Get_Gasp'  allows you  to query  the flags  of  the TrueType
-`gasp' table for  a given character pixel size.   This is useful
-to duplicate  the text rendering  of MS Windows when  the native
-bytecode  interpreter is  enabled (which  isn't the  default for
-other patent reasons).
-Its  declaration   and  documentation  can  be   found  in  file
-`include/freetype/ftgasp.h'   (to   be   accessed   with   macro
-FT_GASP_H).
-III. IMPORTANT CHANGES
-- The auto-hinter has been tuned a lot to improve its results with
-serif fonts, resulting in much better font rendering of many web
-pages.
-- The unpatented  hinter is now part  of the default  build of the
-library; we  have added  code to automatically  support `tricky'
-fonts that need it.
-This means  that FreeType should `just work'  with certain Asian
-fonts, like  MingLiU, which cannot properly be  loaded without a
-bytecode interpreter,  but which fortunately  do not use  any of
-the patented  bytecode opcodes.  We detect these  fonts by name,
-so please  report any font file  that doesn't seem  to work with
-FreeType, and  we shall do what we  can to support it  in a next
-release.
-Note  that  the API  hasn't  changed,  so  you can  still  force
-unpatented hinting with a special parameter to `FT_Open_Face' as
-well.  This  might be useful in  same cases; for  example, a PDF
-reader might present  a user option to activate  it to deal with
-certain  `tricky'   embedded  fonts  which   cannot  be  clearly
-identified.
-If you are  a developer for embedded systems,  you might want to
-*disable*  the   feature  to  save  code   space  by  undefining
-TT_CONFIG_OPTION_UNPATENTED_HINTING in file `ftoption.h'.
-- LCD-optimized rendering is now  *disabled* in all default builds
-of  the  library,  mainly   due  to  patent  issues.   For  more
-information see:
-http://lists.gnu.org/archive/html/freetype/2006-09/msg00064.html
-A  new  configuration macro  FT_CONFIG_OPTION_SUBPIXEL_RENDERING
-has been introduced in  `ftoption.h'; manually define it in this
-file if you want to re-enable the feature.
-The  change only  affects the  implementation, not  the FreeType
-API.  This means that clients don't need to be modified, because
-the library still generates  LCD decimated bitmaps, but with the
-added constraint that R=G=B on each triplet.
-The  displayed result  should  be equal  to normal  anti-aliased
-rendering.
-Additionally,  if   FT_CONFIG_OPTION_SUBPIXEL_RENDERING  is  not
-defined, the new  `FT_Library_SetLcdFilter' function returns the
-FT_Err_Unimplemented_Feature error code.
-- Some computation bugs in  the TrueType bytecode interpreter were
-found,  which  allow us  to  get rid  of  very  subtle and  rare
-differences we had experienced with the Windows renderer.
-- It is now possible to cross-compile the library easily.  See the
-file `docs/INSTALL.CROSS' for details.
-- The file `src/base/ftmac.c' now contains code for Mac OS X only;
-its  deprecated function  `FT_GetFile_From_Mac_Font_Name' always
-returns an  error even if the QuickDraw  framework is available.
-The previous version has been moved to `builds/mac/ftmac.c'.
-Selecting  configure option `--with-quickdraw-carbon'  makes the
-build process use the original `ftmac.c' file instead of the Mac
-OS X-only version.
-IV. MISCELLANEOUS
-- Various performance and memory footprint optimizations have been
-performed on  the TrueType and CFF font  loaders, sometimes with
-very drastic  benefits (e.g., the  TrueType loader is  now about
-25% faster;  FreeType should use  less heap memory  under nearly
-all conditions).
-- The anti-aliased rasterizer has been optimized and is now 15% to
-25%  percent  faster than  in  previous  versions, depending  on
-content.
-- The Type 1 loader has been improved; as an example, it now skips
-top-level dictionaries properly.
-- Better support for Mac  fonts on POSIX systems, plus compilation
-fixes for Mac OS X on ppc64 where `ftmac.c' cannot be built.
-- Configuration  without `--with-old-mac-fonts'  does  not include
-`ftmac.c' (this was the behaviour in FreeType version 2.1.10).
-- The TrueTypeGX validator (gxvalid) checks the order of glyph IDs
-in the kern table.
-======================================================================
-CHANGES BETWEEN 2.2.1 and 2.2
-I. IMPORTANT BUG FIXES
-- Various integer overflows have been fixed.
-- PFB fonts with MacOS resource fork weren't  handled correctly on
-non-MacOS platforms.
-======================================================================
-CHANGES BETWEEN 2.2 and 2.1.10
-(not released officially)
-I. IMPORTANT BUG FIXES
-- Vertical metrics for SFNT fonts were incorrect sometimes.
-- The FT_HAS_KERNING macro always returned 0.
-- CFF OpenType  fonts didn't  return correct vertical  metrics for
-glyphs with outlines.
-- If FreeType was compiled without hinters, all font formats based
-on PS outlines weren't scaled correctly.
-II. IMPORTANT CHANGES
-- Version 2.2 no longer exposes its internals, this is, the header
-files  located in  the `include/freetype/internal'  directory of
-the source package are not  copied anymore by the `make install'
-command.  Consequently, a number of rogue clients which directly
-access  FreeType's  internal   functions  and  structures  won't
-compile without modification.
-We provide  patches for  most of those  rogue clients.   See the
-following page for more information:
-http://www.freetype.org/freetype2/patches/rogue-patches.html
-Note that, as  a convenience to our Unix  desktop users, version
-2.2 is *binary* compatible with FreeType 2.1.7, which means that
-installing this  release on  an existing distribution  shall not
-break any working desktop.
-- FreeType's build  mechanism has been redesigned.   With GNU make
-it  is  now  sufficient  in   most  cases  to  edit  two  files:
-`modules.cfg',  to  select   the  library  components,  and  the
-configuration  file  `include/freetype/config/ftoption.h' (which
-can be copied to the objects directory).  Removing unused module
-directories   to    prevent   its   compilation    and   editing
-`include/freetype/config/ftmodule.h' is no longer necessary.
-- The  LIGHT  hinting algorithm  produces  more pleasant  results.
-Also, using the  FT_LOAD_TARGET_LIGHT flags within FT_Load_Glyph
-always forces auto-hinting, as a special exception.  This allows
-you to experiment with it  even if you have enabled the TrueType
-bytecode interpreter in your build.
-- The auto hinter now employs a new algorithm for CJK fonts, based
-on Akito  Hirai's patch.   Note that this  only works  for fonts
-with a Unicode charmap at the moment.
-- The following callback function  types have changed slightly (by
-adding the `const' keyword where appropriate):
-FT_Outline_MoveToFunc
-FT_Outline_LineToFunc
-FT_Outline_ConicToFunc
-FT_Outline_CubicToFunc
-FT_SpanFunc
-FT_Raster_RenderFunc
-FT_Glyph_TransformFunc
-FT_Renderer_RenderFunc
-FT_Renderer_TransformFunc
-Note that this doesn't affect binary backward compatibility.
-- On MacOS,  new APIs have  been added as replacements  for legacy
-APIs:  `FT_New_Face_From_FSRef'  for  `FT_New_Face_From_FSSpec',
-and              `FT_GetFile_From_Mac_ATS_Name'              for
-`FT_GetFile_From_Mac_Name'.  Legacy APIs are still available, if
-FreeType is built without disabling them.
-- A new  API `FT_Select_Size'  has been added  to select  a bitmap
-strike  by its  index.   Code using  other  functions to  select
-bitmap strikes should be updated to use this function.
-- A  new API  `FT_Get_SubGlyph_Info'  has been  added to  retrieve
-subglyph data.  This can be  used by rogue clients which used to
-access the internal headers to get the corresponding data.
-- In 2.1.10, the behaviour of `FT_Set_Pixel_Sizes' was changed for
-BDF/PCF fonts,  and only  for them.  This  causes inconsistency.
-In this release,  we undo the change.  The  intent of the change
-in 2.1.10  is to allow  size selection through  real dimensions,
-which can now be done through `FT_Request_Size'.
-- Some security  issues were discovered  and fixed in the  CFF and
-Type  1 loader, causing  crashes of  FreeType by  malformed font
-files.
-III. MISCELLANEOUS
-- The documentation  for FT_LOAD_TARGET_XXX and FT_RENDER_MODE_XXX
-values now better reflects its usage and differences: One set is
-used to specify the hinting algorithm, the other to specify  the
-pixel rendering mode.
-- `FT_New_Face' and `FT_New_Face_From_FSSpec' in ftmac.c have been
-changed to count supported scalable faces (sfnt, LWFN) only, and
-to  return the  number of  available faces  via face->num_faces.
-Unsupported bitmap faces (fbit, NFNT) are ignored.
-- builds/unix/configure  has been  improved for  MacOS X.   It now
-automatically checks available  functions in Carbon library, and
-prepare to use newest  functions by default.  Options to specify
-the  dependencies of  each Carbon  APIs (FSSpec,  FSRef, old/new
-QuickDraw, ATS)  are available too.  By manual  disabling of all
-QuickDraw   functionality,  FreeType   can   be  built   without
-`deprecated   function'   warnings    on   MacOS   10.4.x,   but
-FT_GetFile_Mac_Name  in  ftmac.c  then  is changed  to  a  dummy
-function, and returns an `unimplemented' error.  For details see
-builds/mac/README.
-- SFNT cmap handling has been  improved, mainly to run much faster
-with CJK fonts.
-- A   new  function   `FT_Get_TrueType_Engine_Type   (declared  in
-`FT_MODULE_H')  is  provided  to  determine the  status  of  the
-TrueType   bytecode  interpreter   compiled  into   the  library
-(patented, unpatented, unimplemented).
-- Vertical metrics of glyphs are  synthesized if the font does not
-provide such information.  You can tell whether  the metrics are
-synthesized or not by checking the FT_FACE_FLAG_VERTICAL flag of
-the face.
-- The demo programs  `ftview' and  `ftstring' have been  rewritten
-for better readability.   `ftview' has a new switch `-p' to test
-FT_New_Memory_Face (instead of FT_New_Face).
-- FreeType now honours bit 1 in the `head' table of TrueType fonts
-(meaning `left sidebearing point at x=0').  This helps with some
-buggy fonts.
-- Rudimentary support for Adobe's new `SING Glyphlet' format.  See
-http://www.adobe.com/products/indesign/sing_gaiji.html
-for more information.
-- The `ftdump'  program from the `ft2demos' bundle  now shows some
-information about charmaps.  It  also supports a new switch `-v'
-to increase verbosity.
-- Better AFM support.  This includes track kerning support.
-======================================================================
-CHANGES BETWEEN 2.1.10 and 2.1.9
-I. IMPORTANT BUG FIXES
-- The size comparison for BDF and PCF files could fail sometimes.
-- Some  CFF files  were still not  loaded  correctly.   Patch from
-Derek Noonburg.
-- The stroker still had some serious bugs.
-- Boris  Letocha  fixed a  bug in  the  TrueType interpreter:  The
-NPUSHW instruction wasn't skipped correctly in IF clauses.  Some
-fonts like `Helvetica 75 Bold' failed.
-- Another  serious  bug  in  handling  TrueType hints  caused many
-distortions.  It has been introduced in version 2.1.8, and it is
-highly recommended to upgrade.
-- FreeType didn't properly parse empty Type 1 glyphs.
-- An unbound dynamic buffer growth was fixed in the PFR loader.
-- Several bugs have been fixed in the cache sub-system.
-- FreeType behaved incorrectly when resizing two distinct but very
-close character pixel sizes through `FT_Set_Char_Size' (Savannah
-bug #12263).
-- The auto-hinter didn't work properly for fonts without a Unicode
-charmap -- it even refused to load the glyphs.
-II. IMPORTANT CHANGES
-- Many fixes have been applied to drastically reduce the amount of
-heap   memory   used   by   FreeType,   especially   when  using
-memory-mapped font files  (which is the default on Unix  systems
-which support them).
-- The auto-hinter  has been replaced with a new module, called the
-`auto-fitter'.  It consumes  less memory  than its  predecessor,
-and it is  prepared to support non-latin scripts  better in next
-releases.
-- George Williams  contributed code to read  kerning data from PFM
-files.
-- FreeType   now   uses    the   TT_NAME_ID_PREFERRED_FAMILY   and
-TT_NAME_ID_PREFERRED_SUBFAMILY   strings   (if   available)  for
-setting  family  and  style in SFNT  fonts  (patch from Kornfeld
-Eliyahu Peter).
-- A  new  API `FT_Sfnt_Table_Info'  (in FT_TRUETYPE_TABLES_H)  has
-been added to retrieve name and size information of SFNT tables.
-- A new API `FT_OpenType_Validate' (in FT_OPENTYPE_VALIDATE_H) has
-been added to validate OpenType tables  (BASE, GDEF, GPOS, GSUB,
-JSTF).   After validation  it is  no longer  necessary to  check
-for errors in those tables while accessing them.
-Note that  this module might  be moved to another library in the
-future  to avoid  a tight  dependency between  FreeType and  the
-OpenType specification.
-- A new API in FT_BITMAP_H  (`FT_Bitmap_New', `FT_Bitmap_Convert',
-`FT_Bitmap_Copy',  `FT_Bitmap_Embolden',  `FT_Bitmap_Done')  has
-been added.   Its  use is  to convert an  FT_Bitmap structure in
-1bpp, 2bpp,  4bpp, or 8bpp  format into  another 8bpp FT_Bitmap,
-probably using a different pitch, and to further manipulate it.
-- A new  API `FT_Outline_Embolden'  (in FT_OUTLINE_H) gives  finer
-control how  outlines are embolded.
-- `FT_GlyphSlot_Embolden' (in FT_SYNTHESIS_H)  now handles bitmaps
-also (code contributed  by Chia I Wu).  Note that this  function
-is still experimental and may be replaced with a better API.
-- The method  how BDF and PCF  bitmap fonts  are accessed has been
-refined.   Formerly,   FT_Set_Pixel_Sizes  and  FT_Set_Char_Size
-were  synonyms in  FreeType's  BDF and PCF interface.  This  has
-changed now.  FT_Set_Pixel_Sizes  should be  used to  select the
-actual  font dimensions  (the `strike',  which is the sum of the
-`FONT_ASCENT'    and    `FONT_DESCENT'    properties),     while
-FT_Set_Char_Size  selects  the  `nominal' size  (the `PIXELSIZE'
-property).  In both functions, the width parameter is ignored.
-III. MISCELLANEOUS
-- The BDF driver  no longer converts  all returned bitmaps  with a
-depth of 2bpp or 4bpp to a depth of 8bpp.  The documentation has
-not  mentioned  this  explicitly,  but  implementors  might have
-relied on this after looking into the source files.
-- A new option `--ftversion' has been  added to freetype-config to
-return the FreeType version.
-- The  memory  debugger  has  been  updated   to  dump  allocation
-statistics on  all allocation  sources in the library.   This is
-useful to  spot greedy  allocations when  loading and processing
-fonts.
-- We removed a huge array of constant pointers to constant strings
-in the `psnames' module.   The problem was that  compilations in
-PIC mode (i.e.,  when generating a  Unix shared object/dll)  put
-the array  into the non-shared  writable section of  the library
-since absolute pointers are not relocatable by nature.
-This reduces the memory consumption by approximately 16KByte per
-process linked  to FreeType.   We now also store  the array in a
-compressed form (as a trie) which saves about 20KByte of code as
-well.
-- Kirill  Smelkov provided  patches to make  src/raster/ftraster.c
-compile stand-alone again.
-======================================================================
-CHANGES BETWEEN 2.1.9 and 2.1.8
-I. IMPORTANT BUG FIXES
-- The function  `FT_Get_CharMap_Index' was only declared,  without
-any  real  code.   For  consistency,  it  has  been  renamed  to
-`FT_Get_Charmap_Index'.   (This function is needed  to implement
-cmap caches.)
-- `FT_Outline_Get_BBox'  sometimes returned  incorrect values  for
-conic outlines (e.g., for TrueType fonts).
-- Handling of `bhed' table has been fixed.
-- The TrueType driver with enabled byte code interpreter sometimes
-returned artifacts due to incorrect rounding.  This bug has been
-introduced after version 2.1.4.
-- The BDF driver dropped the last glyph in the font.
-- The BDF driver now uses the DEFAULT_CHAR property (if available)
-to select a glyph shape for the undefined glyph.
-- The stroker failed for closed outlines and single points.
-II. IMPORTANT CHANGES
-- George  Williams   contributed  code  to   handle  Apple's  font
-distortion technology found in GX fonts (`avar', `cvar', `fvar',
-and `gvar' tables;  the Multiple Masters  API has been  slightly
-extended to cope with the new functionality).
-- The `FT_GlyphSlotRec' structure has been extended:  The elements
-`lsb_delta' and  `rsb_delta' give the difference  between hinted
-and  unhinted  left and right  side bearings  if autohinting  is
-active.  Using those values can improve the inter-letter spacing
-considerably.   See the documentation of  `FT_GlyphSlotRec'  and
-the `ftstring' demo program how to use it.
-- Loading TrueType and Type 1 fonts has been made much faster.
-- The stroker is  no longer experimental (but the  cache subsystem
-still is).
-III. MISCELLANEOUS
-- A new  documentation file  `formats.txt' describes various  font
-formats supported (and not supported) by FreeType.
-======================================================================
-CHANGES BETWEEN 2.1.8 and 2.1.7
-I. IMPORTANT BUG FIXES
-- The native  TrueType hinter contained some  bugs which prevented
-some fonts to be rendered correctly, most notably Legendum.otf.
-- The PostScript hinter now produces improved results.
-- The  linear advance  width  and height  values were  incorrectly
-rounded,  making  them virtually  unusable  if  not loaded  with
-FT_LOAD_LINEAR_DESIGN.
-- Indexing CID-keyed CFF fonts is  now working: The glyph index is
-correctly  treated as a  CID, similar  to FreeType's  CID driver
-module.  Note that CID CMap support is still missing.
-- The FT_FACE_FLAGS_GLYPH_NAMES flag is now  set correctly for all
-font formats.
-- Some subsetted Type 1  fonts weren't parsed correctly.  This bug
-has been introduced in 2.1.7.  In summary, the Type 1 parser has
-become more robust.
-- Non-decimal numbers weren't parsed correctly in PS fonts.
-- The WinFNT driver now correctly reports FT_ENCODING_NONE for all
-but one encoding.  Use  the new FT_WinFNT_ID_XXX values together
-with `FT_Get_WinFNT_Header' to get the WinFNT charset ID.
-- The descender metrics (face->size->metrics.descender) for WinFNT
-bitmap fonts had the wrong sign.
-- The (emulated) `seac' support for CFF fonts was broken.
-- The `flex' operator didn't work for CFF fonts.
-- PS glyphs  which  use  the   `hintmask'  operator  haven't  been
-rendered correctly in some cases.
-- Metrics for BDF and PCF bitmap font formats have been fixed.
-- Autohinting  is now  disabled for  glyphs  which  are vertically
-distorted  or mirrored  (using a  transformation matrix).   This
-fixes a bug which produced zero-height glyphs.
-- The   `freetype-config'   script   now  handles   --prefix   and
---exec-prefix correctly; it also  returns the proper --rpath (or
--R) value if FreeType has been built as a shared library.
-II. IMPORTANT CHANGES
-- Both  PCF  and BDF  drivers  now  handle  the SETWIDTH_NAME  and
-ADD_STYLE_NAME    properties.     Values    are   appended    to
-face->style_name; example: `Bold SemiCondensed'.
-- The PCF driver now handles bitmap  fonts compressed with the LZW
-algorithm (extension .pcf.Z, compressed with `compress').
-- A  new  API   function  `FT_Get_CMap_Language_ID'  (declared  in
-`tttables.h')  is  available  to   get  the  language  ID  of  a
-TrueType/SFNT cmap.
-- The hexadecimal format of  data after the `StartData' command in
-CID-keyed Type 1 fonts is now supported.  While this can't occur
-in  file-based   fonts,  it  can   happen  in  document-embedded
-resources of PostScript documents.
-- Embedded bitmaps in SFNT-based CFF fonts are now supported.
-- A simple  API is  now available  to control  FreeType's  tracing
-mechanism if compiled  with FT_DEBUG_LEVEL_TRACE.   See the file
-`ftdebug.h' for more details.
-- YAMATO Masatake contributed improved  handling of MacOS resource
-forks on non-MacOS platforms (for example, Linux can mount MacOS
-file systems).
-- Support for MacOS has been improved; there is now a new function
-`FT_New_Face_From_FSSpec'  similar to `FT_New_Face'  except that
-it accepts an FSSpec instead of a path.
-- The cache sub-system has been rewritten.
-- There is now support for deinstallation of faces.
-- A new  API function `FTC_Manager_RemoveFaceID'  has been added
-to  delete  all  `idle'  nodes  that  correspond  to  a  given
-FTC_FaceID.  All `locked' nodes  (i.e., those with a reference
-count > 0), will be modified to prevent them from appearing in
-further  lookups (they  will  be cleaned  normally when  their
-reference count reaches 0).
-- There  is  now  support  for point  scaling  (i.e.,  providing
-character sizes in points + dpis, instead of pixels).
-- Three abstract cache classes are now available:
-FTC_GCache:  Used to store  one glyph  item per  cache node,
-with the ability to group common attributes into
-`families'.      This    replaces     the    old
-FTC_GlyphCache class.
-FTC_ICache: Used to store one FT_Glyph per cache node.  This
-extends  FTC_GCache.  Family  definition, family
-comparison, and  glyph loading are  however left
-to sub-classes.
-FTC_SCache: Used to  store up to 16 small  bitmaps per cache
-node.    This    extends   FTC_GCache.    Family
-definition, family  comparison and glyph loading
-are however left to sub-classes.
-- The file `src/cache/ftcbasic.c' implements:
-FTC_ImageCache: Extends    FTC_ICache;   implements   family
-definitions and glyph loading similar to the
-old API.
-FTC_SBitCache: Extends    FTC_SCache,    implements   family
-definitions and glyph  loading similar to the
-old API
-Client  applications  should  be  able to  extend  FTC_GCache,
-FTC_ICache, or FTC_SCache much more easily (i.e., less code to
-write, and  less callbacks).  For example,  one could envision
-caches  that are  capable of  storing  transformed (obliqued),
-stroked,   emboldened,   or   colored   glyph   images.    Use
-`ftcbasic.c' as an example.
-- All public  APIs are now  in `include/freetype/ftcache.h', (to
-be    accessed   as    `FT_CACHE_H').     The   contents    of
-`include/freetype/cache/' is only  needed by applications that
-wish to implement their own caches.
-- There were some major performance improvements through the use
-of  various programming  tricks.   Cache hits  are  up to  70%
-faster than in the old code.
-- The  FTC_CMapCache has  been simplified.  Charmaps can only be
-accessed by  index right now.  There  is also a  new API named
-`FT_Charmap_GetIndex' for this purpose.
-- The  demo programs  have been  updated to  the new  code.  The
-previous versions will not work with the current one.
-- Using  an invalid face  index in FT_Open_Face and friends  now
-causes an error even if the font contains a single face only.
-III. MISCELLANEOUS
-- Wolfgang Domröse contributed support files for building FreeType
-on the Atari using the PureC compiler.  Note that the Atari is a
-16bit platform.
-- Vitaliy Pasternak contributed project files for VS.NET 2003.
-======================================================================
-CHANGES BETWEEN 2.1.7 and 2.1.6
-I. IMPORTANT BUG FIXES
-- Updated  to newest  libtool  version, fixing  build problems  on
-various platforms.
-- On  Unix  platforms,  `make  install' didn't  copy  the  correct
-`ftconfig.h' file.
-Note that version 2.1.7  contains the same library  C source code as
-version 2.1.6.
-======================================================================
-CHANGES BETWEEN 2.1.6 and 2.1.5
-I. IMPORTANT BUG FIXES
-- The PFR  font driver didn't  load kerning tables  correctly, and
-the functions in FT_PFR_H didn't work at all.
-- Type 1 font  files in  binary format  (PFB) with  an end-of-file
-indicator weren't accepted by the FreeType engine.
-- Fonts which contain /PaintType  and /StrokeWidth no longer cause
-a segfault.  This bug has been introduced in version 2.1.5.
-- Fonts  loaded  with   FT_LOAD_RENDER  no  longer  cause  strange
-results.  This bug has been introduced in version 2.1.5.
-- Some  Windows   (bitmap)  FNT/FON  files   couldn't  be  handled
-correctly.
-II. IMPORTANT CHANGES
-- The internal  module API  has been heavily  changed in  favor of
-massive simplifications within the font engine.  This also means
-that authors of third-party modules must adapt their code to the
-new scheme.
-NOTE:  THE NEW SCHEME IS NOT COMPLETED YET.  PLEASE WAIT UNTIL A
-FINAL ANNOUNCEMENT!
-- The PostScript  parser has been enhanced to  handle comments and
-strings   correctly.   Additionally,   more  syntax   forms  are
-recognized.
-- Added the  optional unpatented hinting system  for TrueType.  It
-allows  typefaces which  need hinting  to produce  correct glyph
-forms (e.g., Chinese typefaces  from Dynalab) to work acceptably
-without infringing Apple patents.   This system is compiled only
-if  TT_CONFIG_OPTION_COMPILE_UNPATENTED_HINTING  is  defined  in
-ftoption.h (activated by default).
-III. MISCELLANEOUS
-- There  is now  a guard  in the  public header  files  to protect
-against inclusion of freetype.h from FreeType 1.
-- Direct inclusion of freetype.h  and other public header files no
-longer works.  You have to use the documented scheme
-#include <ft2build.h>
-#include FT_FREETYPE_H
-to load freetype.h with  a symbolic name.  This protects against
-renaming  of public  header  files (which  shouldn't happen  but
-actually  has, avoiding two  public header  files with  the same
-name).
-======================================================================
-CHANGES BETWEEN 2.1.5 and 2.1.4
-I. IMPORTANT BUG FIXES
-- Parsing the /CIDFontName field  now removes the leading slash to
-be in sync with other font drivers.
-- gzip support was buggy.  Some fonts could not be read.
-- Fonts which  have nested subglyphs  more than one level  deep no
-longer cause a segfault.
-- Creation of synthetic  cmaps for fonts in CFF  format was broken
-partially.
-- Numeric  font  dictionary entries  for  synthetic  fonts are  no
-longer overwritten.
-- The font matrix  wasn't applied to the advance  width for Type1,
-CID, and  CFF fonts.  This caused problems  when loading certain
-synthetic Type 1 fonts like `Helvetica Narrow'.
-- The test  for the charset registry  in BDF and PCF  fonts is now
-case-insensitive.
-- FT_Vector_Rotate  sometimes  returned   strange  values  due  to
-rounding errors.
-- The  PCF  driver  now  returns  the  correct  number  of  glyphs
-(including an artificial `notdef' glyph at index 0).
-- FreeType now  supports buggy CMaps  which are contained  in many
-CJK fonts from Dynalab.
-- Opening  an invalid  font  on a  Mac  caused a  segfault due  to
-double-freeing memory.
-- BDF  fonts  with  more   than  32768  glyphs  weren't  supported
-properly.
-II. IMPORTANT CHANGES
-- Accessing bitmap font formats has been synchronized.  To do that
-the FT_Bitmap_Size  structure has  been extended to  contain new
-fields `size', `x_ppem', and `y_ppem'.
-- The FNT driver now returns multiple faces, not multiple strikes.
-- The `psnames'  module has been  updated to the Adobe  Glyph List
-version 2.0.
-- The `psnames' module now understands `uXXXX[X[X]]' glyph names.
-- The algorithm for guessing the font style has been improved.
-- For fonts in SFNT format, root->height is no longer increased if
-the line gap  is zero.  There exist fonts  (containing e.g. form
-drawing  characters) which  intentionally have  a zero  line gap
-value.
-- ft_glyph_bbox_xxx  flags   are  now  deprecated   in  favour  of
-FT_GLYPH_BBOX_XXX.
-- ft_module_xxx   flags   are   now   deprecated  in   favour   of
-FT_MODULE_XXX.
-- FT_ENCODING_MS_{SJIS,GB2312,BIG5,WANSUNG,JOHAB}      are     now
-deprecated               in               favour              of
-FT_ENCODING_{SJIS,GB2312,GIB5,WANSONG,JOHAB}  -- those encodings
-are not specific to Microsoft.
-III. MISCELLANEOUS
-- The  autohinter  has been  further  improved;  for example,  `m'
-glyphs now retain its vertical symmetry.
-- Partial support of Mac fonts on non-Mac platforms.
-- `make   refdoc'   (after   first   `make')   builds   the   HTML
-documentation.  You need Python for this.
-- The make build system should  now work more reliably on DOS-like
-platforms.
-- Support for  EMX gcc  and Watson C/C++  compilers on  MS-DOS has
-been added.
-- Better VMS build support.
-- Support for the pkg-config  package by providing a `freetype.pc'
-file.
-- New configure option --with-old-mac-fonts for Darwin.
-- Some source files have been  renamed (mainly to fit into the 8.3
-naming scheme).
-======================================================================
-CHANGES BETWEEN 2.1.4 and 2.1.3
-I. IMPORTANT BUG FIXES
-- Updated  to newest  libtool  version, fixing  build problems  on
-various platforms.
-- A fix  in the Gzip stream  reader: It couldn't  read certain .gz
-files properly due to a  small typo.  In certain cases, FreeType
-could  also loop  endlessly  when trying  to  load tiny  gzipped
-files.
-- The configure script now tries  to use the system-wide zlib when
-it  finds one  (instead of  the  copy found  in src/gzip).   And
-`freetype-config' has  been updated to return  relevant flags in
-this case when invoked with `--libs' (e.g. `-lzlib').
-- Certain fonts couldn't be loaded  by 2.1.3 because they lacked a
-Unicode   charmap  (e.g.   SYMBOL.TTF).    FreeType  erroneously
-rejected them.
-- The CFF loader was modified to accept fonts which only contain a
-subset of  their reference charset.  This  prevented the correct
-use of PDF-embedded fonts.
-- The logic to detect Unicode charmaps has been modified.  This is
-required to  support fonts which include both  16-bit and 32-bit
-charmaps (like very  recent asian ones) using the  new 10 and 12
-SFNT formats.
-- The TrueType  loader now limits  the depth of  composite glyphs.
-This is necessary to prevent broken fonts to break the engine by
-blowing the stack with recursive glyph definitions.
-- The CMap cache is now  capable of managing UCS-4 character codes
-that   are   mapped   through   extended  charmaps   in   recent
-TrueType/OpenType fonts.
-- The   cache  sub-system   now  properly   manages  out-of-memory
-conditions  instead of  blindly  reporting them  to the  caller.
-This means that it will try to empty the cache before restarting
-its allocations to see if that can help.
-- The  PFR driver  didn't return  the list  of  available embedded
-bitmaps properly.
-- There was  a nasty  memory leak when  using embedded  bitmaps in
-certain font formats.
-II. IMPORTANT CHANGES
-- David Chester  contributed some enhancements  to the auto-hinter
-that  significantly increase  the  quality of  its output.   The
-Postscript hinter was also improved in several ways.
-- The FT_RENDER_MODE_LIGHT render mode was implemented.
-- A new  API function called `FT_Get_BDF_Property'  has been added
-to FT_BDF_H to  retrieve BDF properties from BDF  _and_ PCF font
-files.   THIS  IS  STILL  EXPERIMENTAL,  since  it  hasn't  been
-properly tested yet.
-- A Windows FNT specific API has been added, mostly to access font
-headers.  This is used by Wine.
-- TrueType tables  without an `hmtx' table are  now tolerated when
-an  incremental interface  is  used.  This  happens for  certain
-Type42 fonts passed from Ghostscript to FreeType.
-- The PFR font driver is  now capable of returning the font family
-and style  names when  they are available  (instead of  the sole
-`FontID').   This  is  performed  by parsing  an  *undocumented*
-portion of the font file!
-III. MISCELLANEOUS
-- The path stroker in FT_STROKER_H has entered beta stage.  It now
-works very  well, but  its interface might  change a bit  in the
-future.  More on this in later releases.
-- The documentation for  FT_Size_Metrics didn't appear properly in
-the API reference.
-- The file docs/VERSION.DLL has been updated to explain versioning
-with FreeType  (i.e., comparing release/libtool/so  numbers, and
-how to use them in autoconf scripts).
-- The  installation  documentation  has been  seriously  revamped.
-Everything is now in the `docs' directory.
-======================================================================
-CHANGES BETWEEN 2.1.3 and 2.1.2
-I. IMPORTANT BUG FIXES
-- FT_Vector_Transform  had  been  incorrectly modified  in  2.1.2,
-resulting  in  incorrect   transformations  being  applied  (for
-example, rotations were processed in opposite angles).
-- The format  8 and 12 TrueType charmap  enumeration routines have
-been fixed (FT_Get_Next_Char returned invalid values).
-- The  PFR font driver  returned incorrect  advance widths  if the
-outline  and metrics resolution  defined in  the font  file were
-different.
-- FT_Glyph_To_Bitmap now returns  successfully when called with an
-FT_BitmapGlyph argument (it previously returned an error).
-- A bug  in the Type 1  loader that prevented  valid font bounding
-boxes to be loaded from multiple master fonts.
-- The SFNT  validation code has been rewritten.   FreeType can now
-load `broken'  fonts that were  usable on Windows, but  not with
-previous versions of the library.
-- The computation of bearings in the BDF driver has been fixed.
-- The Postscript hinter crashed when trying to hint certain glyphs
-(more precisely,  when trying to  apply hints to an  empty glyph
-outline).
-- The  TrueType glyph  loader  now supports  composites in  `Apple
-format'  (they differ slightly  from Microsoft/OpenType  ones in
-the way transformation offsets are computed).
-- FreeType was  very slow at opening certain  asian CID/CFF fonts,
-due to  fixed increment  in dynamic array  re-allocations.  This
-has  been changed  to  exponential behaviour  to get  acceptable
-performance.
-II. IMPORTANT CHANGES
-- The PCF driver now supports gzip-compressed font files natively.
-This means that  you will be able to use  all these bitmap fonts
-that  come with  XFree86 with  FreeType (and  libXft/libXft2, by
-extension).
-- The  automatic and  postscript hinters  have both  been updated.
-This  results in  a relatively  important increase  of rendering
-quality since  many nasty defaults have been suppressed.  Please
-visit the web page:
-http://www.freetype.org/hinting/smooth-hinting.html
-for additional details on this topic.
-- The `load_flags' parameter of `FT_Load_Glyph' is now an FT_Int32
-(instead  of just  being  an FT_Int).   This  breaks source  and
-binary  compatibility for  16bit systems  only,  while retaining
-both of them for 32 and 64 bit ones.
-Some new flags have been added consequently:
-FT_LOAD_NO_AUTOHINT   :: Disable the use of the auto-hinter
-(but not native format hinters).
-FT_LOAD_TARGET_NORMAL :: Hint and render for normal
-anti-aliased displays.
-FT_LOAD_TARGET_MONO   :: Hint and render for 1-bit displays.
-FT_LOAD_TARGET_LCD    :: Hint and render for horizontal RGB or
-BGR sub-pixel displays (like LCD
-screens).  THIS IS STILL
-EXPERIMENTAL!
-FT_LOAD_TARGET_LCD_V  :: Same as FT_LOAD_TARGET_LCD, for
-vertical sub-pixel displays (like
-rotated LCD screens).  THIS IS STILL
-EXPERIMENTAL!
-FT_LOAD_MONOCHROME   is  still   supported,  but   only  affects
-rendering, not the hinting.
-Note that the `ftview'  demo program available in the `ft2demos'
-package  has been  updated to  support LCD-optimized  display on
-non-paletted displays (under Win32 and X11).
-- The  PFR  driver  now  supports embedded  bitmaps  (all  formats
-supported), and returns correct kerning metrics for all glyphs.
-- The TrueType charmap loader  now supports certain `broken' fonts
-that load under Windows without problems.
-- The cache API has been slightly modified (it's still a beta!):
-- The type  FTC_ImageDesc has been removed; it  is now replaced
-by  FTC_ImageTypeRec.   Note that  one  of  its  fields is  a
-`load_flag' parameter for FT_Load_Glyph.
-- The  field  `num_grays' of  FT_SBitRec  has  been changed  to
-`max_grays'  in  order to  fit  within  a  single byte.   Its
-maximum value is thus 255 (instead of 256 as previously).
-III. MISCELLANEOUS
-- Added support  for the  DESTDIR variable during  `make install'.
-This simplifies packaging of FreeType.
-- Included modified  copies of the  ZLib sources in  `src/gzip' in
-order to support  gzip-compressed PCF fonts.  We do  not use the
-system-provided  zlib  for  now,   though  this  is  a  probable
-enhancement for future releases.
-- The DocMaker tool used to generate the on-line API reference has
-been   completely    rewritten.    It   is    now   located   in
-`src/tools/docmaker/docmaker.py'.  Features:
-- better cross-referenced output
-- more polished output
-- uses Python regular expressions  (though it didn't speed the
-program)
-- much  more  modular structure,  which  allows for  different
-`backends'  in  order to  generate  HTML,  XML, or  whatever
-format.
-One can regenerate the API reference by calling:
-python src/tools/docmaker/docmaker.py \
---prefix=ft2 \
---title=FreeType-2.1.3 \
---output=<outputdirectory>
-include/freetype/*.h \
-include/freetype/config/*.h \
-include/freetype/cache/*.h
-- A new, experimental, support for incremental font loading (i.e.,
-loading  of fonts  where the  glyphs are  not in  the  font file
-itself, but provided by an external component, like a Postscript
-interpreter) has been added by Graham Asher.  This is still work
-in progress, however.
-- A new,  EXPERIMENTAL, path stroker  has been added.   It doesn't
-suffer  from  severe  rounding  errors  and  treat  bezier  arcs
-directly.  Still work in progress (i.e. not part of the official
-API).   See  the file  <freetype/ftstroker.h>  for  some of  the
-details.
-- The massive  re-formatting of sources and  internal re-design is
-still under-way.  Many  internal functions, constants, and types
-have been renamed.
-======================================================================
-CHANGES BETWEEN 2.1.2 and 2.1.1
-I. IMPORTANT BUG FIXES
-- Many  font drivers didn't  select a  Unicode charmap  by default
-when a new face  was opened (with the FT_CONFIG_OPTION_USE_CMAPS
-options enabled),  causing many applications  to not be  able to
-display text correctly with the 2.1.x releases.
-- The  PFR driver had  a bug  in its  composite loading  code that
-produces incorrectly placed accents with many fonts.
-- The Type42 driver crashed sometimes due to a nasty bug.
-- The Type 1 custom encoding  charmap didn't handle the case where
-the first glyph index wasn't 0.
-- A  serious  typo  in  the  TrueType  composite  loader  produced
-incorrectly placed  glyphs in fonts  like `Wingdings' and  a few
-others.
-II. MISCELLANEOUS
-- The Win32  Visual C++ project  file has been updated  to include
-the PFR driver as well.
-- `freetype.m4' is  now installed by default by  `make install' on
-Unix systems.
-- The function  FT_Get_PS_Font_Info now works with  CID and Type42
-fonts as well.
-======================================================================
-CHANGES BETWEEN 2.1.1 and 2.1.0
-I. IMPORTANT BUG FIXES
-- The  `version_info'  returned   by  `freetype-config'  in  2.1.0
-returned an invalid value.  It now returns 9:1:3 (2.0.9 returned
-9:0:3).
-- Version 2.1.0  couldn't be linked against  applications on Win32
-and  Amiga systems  due  to  a new  debug  function that  wasn't
-properly   propagated  to   the  system-specific   directory  in
-`builds'.
-- Various MacOS and Mac OS X specific fixes.
-- Fixed  a bug in  the TrueType  charmap validation  routines that
-made version  2.1.0 too restrictive  -- many popular  fonts have
-been rejected.
-- There was  still a very small difference  between the monochrome
-glyph bitmaps produced by FreeType 1.x and FreeType 2.x with the
-bytecode  interpreter enabled.   This was  caused by  an invalid
-flag setting in the TrueType glyph loader, making the rasterizer
-change  its  drop-out   control  mode.   Now  the results should
-_really_ be completely identical.
-- The TrueType name table loader has been improved to support many
-popular  though buggy Asian  fonts.  It  now ignores  empty name
-entries,  invalid  pointer offsets  and  a  few other  incorrect
-subtleties.  Moreover,  name strings  are now loaded  on demand,
-which reduces the memory load  of many faces (e.g. the ARIAL.TTF
-font file contains a 10kByte name table with 70 names).
-- Fixed a bug in the Postscript hinter that prevented family blues
-substitution to happen correctly.
-II. NEW FEATURES
-- Three new font drivers in this release:
-* A  BDF  font driver,  contributed  by  Franco Zappa  Nardelli,
-heavily  modified   by  Werner  Lemberg.    It  also  supports
-anti-aliased bitmaps (using a slightly extended BDF format).
-* A Type42  font driver, contributed by Roberto  Alameda.  It is
-still experimental but seems to work relatively well.
-* A PFR  font driver, contributed  by David Turner  himself.  It
-doesn't  support PFR  hinting --  note that  BitStream  has at
-least two patents on this format!
-III. MISCELLANEOUS
-- The  cache  sub-system has  been  optimized  in important  ways.
-Cache hits are now significantly faster.  For example, using the
-CMap cache is about  twice faster than calling FT_Get_Char_Index
-on most platforms.  Similarly, using an SBit cache is about five
-times faster  than loading the  bitmaps from a bitmap  file, and
-300 to  500 times  faster than generating  them from  a scalable
-format.
-Note that  you should recompile  your sources if you  designed a
-custom  cache  class for  the  FT2  Cache  subsystem, since  the
-changes performed are source, but not binary, compatible.
-======================================================================
-CHANGES BETWEEN 2.1.0 and 2.0.9
-I. IMPORTANT BUG FIXES
-- The  TrueType bytecode  interpreter  has been  fixed to  produce
-_exactly_ the same output as FreeType 1.x.  Previous differences
-were due  to slightly distinct  fixed-point computation routines
-used to perform dot products and vector length measurements.
-It seems  that native TrueType hinting  is _extremely_ sensitive
-to  rounding errors.  The  required vector  computation routines
-have been optimized and placed within the `ttinterp.c' file.
-- Fixed the parsing of accelerator tables in the PCF font driver.
-- Fixed the Type1 glyph loader  routine used to compute the font's
-maximum advance width.
-II. NEW FEATURES
-- The `configure' script used on Unix systems has been modified to
-check  that  GNU  Make  is  being used  to  build  the  library.
-Otherwise,  it  will display  a  message  proposing  to use  the
-GNUMAKE environment variable to name it.
-The Unix-specific file README.UNX has been modified accordingly.
-III. MISCELLANEOUS
-- The  FreeType  License in  `docs/FTL.TXT'  has  been updated  to
-include  a  proposed preferred  disclaimer.   If  you are  using
-FreeType in your products, you are encouraged (but not mandated)
-to use the following text in your documentation:
-"""
-Portions of this software are copyright © 1996-2002 The
-FreeType Project (www.freetype.org).  All rights reserved.
-"""
-- The default size of the render pool has been reduced to 16kByte.
-This  shouldn't result  in any  noticeable  performance penalty,
-unless you are  using the engine as-is to  render very large and
-complex glyphs.
-- The  FreeType 2  redesign has  begun.  More  information  can be
-found at this URL:
-http://www.freetype.org/freetype2/redesign.html
-The following  internal changes  have been performed  within the
-sources of this release:
-- Many   internal  types   have  been   renamed   to  increase
-consistency.   The  following  should  be true,  except  for
-public types:
-* All structure  types have a name ending  in `Rec' (short
-for `record').
-* A  pointer-to-structure type  has the  same name  as the
-structure, _without_ the `Rec' suffix.
-Example:
-typedef struct FooRec_
-{
-...
-} FooRec, *Foo;
-- Many   internal  macros  have   been  renamed   to  increase
-consistency.  The following should be true:
-* All  macros  have a  name  beginning  with `FT_'.   This
-required a few changes like
-ALLOC   => FT_ALLOC
-FREE    => FT_FREE
-REALLOC => FT_REALLOC
-* All  macros are completely  UPPERCASE.  This  required a
-few changes like:
-READ_Short  => FT_READ_SHORT
-NEXT_Short  => FT_NEXT_SHORT
-GET_ULongLE => FT_GET_ULONG_LE
-MEM_Set     => FT_MEM_SET
-MEM_Copy    => FT_MEM_COPY
-etc.
-* Whenever   possible,   all   macro  names   follow   the
-FT_<OBJECT>_<METHOD> pattern.  For example
-ACCESS_Frame   => FT_FRAME_ENTER
-FORGET_Frame   => FT_FRAME_EXIT
-EXTRACT_Frame  => FT_FRAME_EXTRACT
-RELEASE_Frame  => FT_FRAME_RELEASE
-FILE_Pos       => FT_STREAM_POS
-FILE_Seek      => FT_STREAM_SEEK
-FILE_Read      => FT_STREAM_READ
-FILE_ReadAt    => FT_STREAM_READ_AT
-READ_Fields    => FT_STREAM_READ_FIELDS
-- Many  internal functions  have  been renamed  to follow  the
-FT_<Object>_<Method> pattern.  For example:
-FT_Seek_Stream       => FT_Stream_Seek
-FT_Read_Stream_At    => FT_Stream_ReadAt
-FT_Done_Stream       => FT_Stream_Close
-FT_New_Stream        => FT_Stream_Open
-FT_New_Memory_Stream => FT_Stream_OpenMemory
-FT_Extract_Frame     => FT_Stream_ExtractFrame
-Note that method names do not contain `_'.
-- The FT_ALLOC_ARRAY  and FT_REALLOC_ARRAY have  been replaced
-with  FT_NEW_ARRAY and  FT_RENEW_ARRAY which  do not  take a
-type  as the  fourth argument.   Instead, the  array element
-type  size is computed  automatically from  the type  of the
-target pointer used.
-- A  new object  class, FT_CMap,  has been  introduced.  These
-internal  objects are  used to  model character  maps.  This
-eases  the support  of additional  charmap types  within the
-engine.
-- A new  configuration file named `ftstdlib.h'  has been added
-to `include/freetype/config'.  It  is used to define aliases
-for  _every_ routine  of the  ISO  C library  that the  font
-engine   uses.    Each    aliases   has   a   `ft_'   prefix
-(e.g. `ft_strlen' is an alias for `strlen').
-This is  used to  ease the porting  of FreeType 2  to exotic
-runtime environments where the ISO C Library isn't available
-(e.g.  XFree86 extension modules).
-More details are available in the `ChangeLog' file.
-======================================================================
-CHANGES BETWEEN 2.0.9 and 2.0.8
-I. IMPORTANT BUG FIXES
-- Certain fonts like `foxjump.ttf' contain broken name tables with
-invalid entries and wild offsets.  This caused FreeType to crash
-when trying to load them.
-The  SFNT `name'  table  loader has  been  fixed to  be able  to
-support these strange fonts.
-Moreover, the code  in charge of processing this  table has been
-changed  to always favour  Windows-formatted entries  over other
-ones.  Hence,  a font that works  on Windows but not  on the Mac
-will  load cleanly in  FreeType and  report accurate  values for
-Family & PostScript names.
-- The CID font driver has been fixed.  It unfortunately returned a
-Postscript   Font   name   with   a   leading   slash,   as   in
-`/MunhwaGothic-Regular'.
-- FreeType  2 should now  compile fine  on AIX  4.3.3 as  a shared
-library.
-- A  bug  in the  Postscript  hinter  has  been found  and  fixed,
-removing un-even stem widths at small pixel sizes (like 14-17).
-This  improves the  quality of  a certain  number  of Postscript
-fonts.
-II. NEW FEATURES
-- A  new function  named  `FT_Library_Version' has  been added  to
-return  the current  library's major,  minor, and  patch version
-numbers.   This is  important since  the  macros FREETYPE_MAJOR,
-FREETYPE_MINOR,  and  FREETYPE_PATCH  cannot  be used  when  the
-library is dynamically linked by a program.
-- Two   new  APIs   have  been   added:   `FT_Get_First_Char'  and
-`FT_Get_Next_Char'.
-Together,  these can  be used  to iterate  efficiently  over the
-currently  selected  charmap of  a  given  face.   Read the  API
-reference for more details.
-III. MISCELLANEOUS
-- The FreeType sources are  under heavy internal re-factoring.  As
-a consequence,  we have created  a branch named `STABLE'  on the
-CVS to hold all future releases/fixes in the 2.0.x family.
-The  HEAD  branch  now  contains  the  re-factored  sources  and
-shouldn't  be used for  testing or  packaging new  releases.  In
-case you  would like  to access the  2.0.9 sources from  our CVS
-repository, use the tag `VER-2-0-9'.
-======================================================================
-CHANGES BETWEEN 2.0.8 and 2.0.7
-I. IMPORTANT BUG FIXES
-- There was  a small but  nasty bug in  `freetype-config.in' which
-caused the `freetype-config' script to fail on Unix.
-This didn't prevent the installation  of the library or even its
-execution, but caused problems  when trying to compile many Unix
-packages that depend on it.
-- Some TrueType or OpenType fonts embedded in PDF documents do not
-have  a  'cmap',  'post'  and  'name'  as  is  required  by  the
-specification.  FreeType no longer refuses to load such fonts.
-- Various fixes to the PCF font driver.
-======================================================================
-CHANGES BETWEEN 2.0.7 and 2.0.6
-I. IMPORTANT BUG FIXES
-- Fixed  two  bugs in  the  Type 1  font  driver.   The first  one
-resulted in a memory leak in subtle cases.  The other one caused
-FreeType to crash when  trying to load `.gsf' files (Ghostscript
-so-called Postscript fonts).
-(This  made _many_  KDE applications  crash on  certain systems.
-FreeType _is_ becoming a critical system component on Linux :-)
-- Fixed a memory leak in the CFF font driver.
-- Fixed a memory leak in the PCF font driver.
-- Fixed       the        Visual       C++       project       file
-`builds/win32/visualc/freetype.dsp' since  it didn't include the
-Postscript hinter component, causing errors at build time.
-- Fixed a  small rendering bug  in the anti-aliased  renderer that
-only  occurred when  trying to  draw  thin (less  than 1  pixel)
-strokes.
-- Fixed  `builds/unix/freetype2.a4' which  is used  to  generate a
-valid `freetype2.m4' for use with autoconf.
-- Fixed the OpenVMS Makefiles.
-II. MISCELLANEOUS
-- Added  `configure'  and   `install'  scripts  to  the  top-level
-directory.  A GNU-style installation is thus now easily possible
-with
-./configure  <options>
-make
-make install
-======================================================================
-CHANGES BETWEEN 2.0.6 and 2.0.5
-I. IMPORTANT BUG FIXES
-- It wasn't possible to load embedded bitmaps when the auto-hinter
-was used.  This is now fixed.
-- The TrueType  font driver  didn't load some  composites properly
-(the  sub-glyphs  were  slightly  shifted,  and  this  was  only
-noticeable when using monochrome rendering).
-- Various  fixes  to the  auto-hinter.   They  merely improve  the
-output of sans-serif fonts.   Note that there are still problems
-with serifed fonts and composites (accented characters).
-- All scalable  font drivers erroneously  returned un-fitted glyph
-advances when hinting was  requested.  This created problems for
-a number  of layout applications.  This  is a very  old bug that
-got  undetected mainly  because most  test/demo  program perform
-rounding explicitly or implicitly (through the cache).
-- `FT_Glyph_To_Bitmap' did erroneously  modify the source glyph in
-certain cases.
-- `glnames.py'  still contained  a bug  that made  FreeType return
-invalid names for certain glyphs.
-- The  library crashed  when  loading certain  Type  1 fonts  like
-`sadn.pfb'  (`Stalingrad  Normal'),   which  appear  to  contain
-pathetic font info dictionaries.
-- The TrueType glyph  loader is now much more  paranoid and checks
-everything when loading a given glyph image.  This was necessary
-to avoid problems (crashes and/or memory overwrites) with broken
-fonts that came from a really buggy automatic font converter.
-II. IMPORTANT UPDATES AND NEW FEATURES
-- Important updates to the Mac-specific parts of the library.
-- The caching sub-system has  been completely re-designed, and its
-API has  evolved (the  old one is  still supported  for backward
-compatibility).
-The documentation for it is  not yet completed, sorry.  For now,
-you are encouraged to continue  using the old API.  However, the
-ftview  demo program in  the ft2demos  package has  already been
-updated to use the new caching functions.
-- A new charmap cache is provided too.  See `FTC_CMapCache'.  This
-is useful to perform  character code -> glyph index translations
-quickly, without the need for an opened FT_Face.
-- A NEW POSTSCRIPT HINTER module  has been added to support native
-hints in  the following  formats: PostScript Type  1, PostScript
-CID, and CFF/CEF.
-Please test!  Note that  the auto-hinter produces better results
-for a number of  badly-hinted fonts (mostly auto-generated ones)
-though.
-- A memory debugger is now  part of the standard FreeType sources.
-To      enable      it,      define      FT_DEBUG_MEMORY      in
-<freetype/config/ftoption.h>, and recompile the library.
-Additionally, define  the _environment_ variable FT_DEBUG_MEMORY
-and run any program using FreeType.  When the library is exited,
-a  summary  of memory  footprints  and  possible  leaks will  be
-displayed.
-This works transparently with  _any_ program that uses FreeType.
-However, you  will need a lot  of memory to  use this (allocated
-blocks are never  released to the heap to  detect double deletes
-easily).
-III. MISCELLANEOUS
-- We  are  aware  of  subtle  differences between  the  output  of
-FreeType  versions   1  and  2  when  it   comes  to  monochrome
-TrueType-hinted glyphs.   These are  most probably due  to small
-differences in the monochrome rasterizers and will be worked out
-in an upcoming release.
-- We have decided to fork the sources in a `stable' branch, and an
-`unstable' one, since FreeType  is becoming a critical component
-of many Unix systems.
-The next  bug-fix releases of  the library will be  named 2.0.7,
-2.0.8, etc.,  while the `2.1'  branch will contain a  version of
-the sources where we will start major reworking of the library's
-internals, in order to produce FreeType 2.2.0 (or even 3.0) in a
-more distant future.
-We  also hope  that this  scheme will  allow much  more frequent
-releases than in the past.
-======================================================================
-CHANGES BETWEEN 2.0.5 and 2.0.4
-NOTE THAT 2.0.5 DOES NOT CONTAIN THE POSTSCRIPT HINTER.  THIS MODULE
-WILL BE PART OF THE NEXT RELEASE (EITHER 2.0.6 or 2.1)
-- Fixed a bug that made  certain glyphs, like `Cacute', `cacute' and
-`lslash'  unavailable from Unicode  charmaps of  Postscript fonts.
-This prevented the correct display of Polish text, for example.
-- The kerning table of Type 1 fonts was loaded by FreeType, when its
-AFM    file    was    attached    to    its    face,    but    the
-FT_FACE_FLAG_HAS_KERNING   bit  flags   was  not   set  correctly,
-preventing FT_Get_Kerning to return meaningful values.
-- Improved  SFNT (TrueType  & OpenType)  charmap  support.  Slightly
-better performance, as well as support for the new formats defined
-by the OpenType 1.3 specification (8, 10, and 12)
-- Fixed a  serious typo in `src/base/ftcalc.c'  which caused invalid
-computations in certain rare cases, producing ugly artefacts.
-- The  size  of the  EM  square is  computed  with  a more  accurate
-algorithm for Postscript fonts.   The old one caused slight errors
-with embedded fonts found in PDF documents.
-- Fixed  a  bug in  the  cache  manager  that prevented  normal  LRU
-behaviour  within the cache  manager, causing  unnecessary reloads
-(for FT_Face and FT_Size objects only).
-- Added  a new  function named  `FT_Get_Name_Index' to  retrieve the
-glyph index of a given glyph name, when found in a face.
-- Added  a new function  named `FT_Get_Postscript_Name'  to retrieve
-the `unique' Postscript font name of a given face.
-- Added   a   new   public   header  size   named   FT_SIZES_H   (or
-<freetype/ftsizes.h>) providing  new FT_Size-management functions:
-FT_New_Size, FT_Activate_Size, FT_Done_Size.
-- Fixed a  reallocation bug that  generated a dangling  pointer (and
-possibly    memory    leaks)    with    Postscript    fonts    (in
-src/psaux/psobjs.c).
-- Many fixes for 16-bit correctness.
-- Removed many pedantic compiler warnings from the sources.
-- Added an Amiga build directory in `builds/amiga'.
-======================================================================
-CHANGES BETWEEN 2.0.4 and 2.0.3
-- Fixed a rather annoying bug that was introduced in 2.0.3.  Namely,
-the font  transformation set through  FT_Set_Transform was applied
-twice to auto-hinted glyphs, resulting in incorrectly rotated text
-output.
-- Fixed _many_  compiler warnings.   FT2 should now  compile cleanly
-with Visual  C++'s most pedantic warning level  (/W4).  It already
-compiled fine with GCC and a few other compilers.
-- Fixed a bug  that prevented the linear advance  width of composite
-TrueType glyphs to be correctly returned.
-- Fixed    the    Visual    C++    project    files    located    in
-`builds/win32/visualc' (previous versions  used older names of the
-library).
-- Many  32-bit constants  have an  `L' appended  to their  value, in
-order to improve the 16-bitness  of the code.  Someone is actually
-trying to use FT2 on an Atari ST machine!
-- Updated  the  `builds/detect.mk' file  in  order to  automatically
-build FT2  on AIX systems.   AIX uses `/usr/sbin/init'  instead of
-`/sbin/init' and wasn't previously  detected as a Unix platform by
-the FreeType build system.
-- Updated  the  Unix-specific  portions  of the  build  system  (new
-libtool version, etc.).
-- The  SFNT kerning  loader now  ensures  that the  table is  sorted
-(since some problem fonts do not meet this requirement).
-=======================================================================
-CHANGES BETWEEN 2.0.3 and 2.0.2
-I. CHANGES TO THE MODULES / FONT DRIVERS
-- THE  AUTO-HINTER HAS  BEEN SLIGHTLY  IMPROVED, in  order  to fix
-several annoying artefacts, mainly:
-- Blue  zone alignment  of  horizontal stems  wasn't performed
-correctly, resulting in artefacts  like the `d' being placed
-one pixel below the `b' in some fonts like Time New Roman.
-- Overshoot thresholding  wasn't performed correctly, creating
-unpleasant artefacts at large character pixel sizes.
-- Composite glyph loading has  been simplified.  This gets rid
-of  various artefacts  where the  components of  a composite
-glyphs were not correctly spaced.
-These are  the last changes to the  current auto-hinting module.
-A new  hinting sub-system is currently  in the work  in order to
-support native hints  in Type 1 / CFF /  OpenType fonts, as well
-as globally improve rendering.
-- The  PCF  driver has  been  fixed.   It  reported invalid  glyph
-dimensions for the fonts available on Solaris.
-- The Type  1, CID and CFF  drivers have been modified  to fix the
-computation of the EM size.
-- The Type 1  driver has been fixed to avoid  a dangerous bug that
-crashed the library with non-conforming fonts (i.e. ones that do
-not place the .notdef glyph at position 0).
-- The TrueType  driver had a  rather subtle bug  (dangling pointer
-when loading  composite glyphs) that could crash  the library in
-rare occasions!
-II. HIGH-LEVEL API CHANGES
-- The error  code enumeration values have been  changed.  An error
-value  is decomposed  in  a  generic error  code,  and a  module
-number.  see <freetype/fterrors.h> for details.
-- A   new  public   header   file  has   been  introduced,   named
-FT_TRIGONOMETRY_H     (include/freetype/fttrig.h),     providing
-trigonometric functions to  compute sines, cosines, arctangents,
-etc. with 16.16 fixed precision.  The implementation is based on
-the CORDIC  algorithm and is very fast  while being sufficiently
-accurate.
-III. INTERNALS
-- Added  BeOS-specific files  in the  old build  sub-system.  Note
-that no changes were required to compile the library with Jam.
-- The  configuration  is now  capable  of automatically  detecting
-64-bit integers  on a set  of predefined compilers  (GCC, Visual
-C++, Borland C++) and will use them by default.  This provides a
-small performance boost.
-- A  small memory leak  that happened  when opening  0-sized files
-(duh!)  have been fixed.
-- Fixed bezier  stack depth  bug in the  routines provided  by the
-FT_BBOX_H  header   file.   Also  fixed  similar   bugs  in  the
-rasterizers.
-- The outline bounding  box code has been rewritten  to use direct
-computations,  instead of  bezier sub-division,  to  compute the
-exact bounding box of glyphs.   This is slightly slower but more
-accurate.
-- The build system has been  improved and fixed, mainly to support
-`make'  on Windows  2000  correctly, avoid  problems with  `make
-distclean' on non Unix systems, etc.
-- Hexadecimal  constants  have been  suffixed  with  `U' to  avoid
-problems with certain compilers on 64-bit platforms.
-- A new directory named `src/tools' has been created.  It contains
-Python scripts and simple unit test programs used to develop the
-library.
-- The DocMaker tool has been  moved from `docs' to `src/tools' and
-has been updated with the following:
-- Now accepts the `--title=XXXX' or `-t XXXX' option from the
-command line to set the project's name in the generated API
-reference.
-- Now accepts the `--output=DIR'  or `-o DIR' option from the
-command line to set  the output directory for all generated
-HTML files.
-- Now accepts the `--prefix=XXXX' or `-p XXX' option from the
-command  line  to  set  the  file prefix  to  use  for  all
-generated HTML files.
-- Now generates the current  time/data on each generated page
-in order to distinguish between versions.
-DocMaker  can be  used with  other  projects now,  not only  FT2
-(e.g. MLib, FTLayout, etc.).
-======================================================================
-CHANGES BETWEEN 2.0.2 and 2.0.1
-I. CHANGES TO THE MODULES / FONT DRIVERS
-- THE TRUETYPE BYTECODE INTERPRETER IS NOW TURNED OFF, in order to
-avoid legal problems  with the Apple patents.  It  seems that we
-mistakenly  turned this option  on in  previous releases  of the
-build.
-Note that if  you want to use the  bytecode interpreter in order
-to get high-quality TrueType  rendering, you will need to toggle
-by        hand        the        definition        of        the
-TT_CONFIG_OPTION_BYTECODE_INTERPRETER   macro    in   the   file
-`include/freetype/config/ftoption.h'.
-- The CFF driver has been improved by Tom Kacvinsky and Sander van
-der Wal:
-* Support for `seac' emulation.
-* Support for `dotsection'.
-* Support for retrieving glyph names through
-`FT_Get_Glyph_Name'.
-The first two items are necessary to correctly a large number of
-Type 1 fonts converted to the CFF formats by Adobe Acrobat.
-- The Type 1 driver was also improved by Tom & others:
-* Better EM size computation.
-* Better support for synthetic (transformed) fonts.
-* The  Type 1  driver returns  the charstrings  corresponding to
-each glyph in the  `glyph->control_data' field after a call to
-`FT_Load_Glyph' (thanks Ha Shao).
-- Various other bugfixes, including the following:
-* Fixed a nasty memory leak in the Type 1 driver.
-* The autohinter  and the pcf  driver used static  writable data
-when they shouldn't.
-* Many casts were added to  make the code more 64-bits safe.  It
-also now compiles on Windows XP 64-bits without warnings.
-* Some incorrect writable statics were removed in the `autohint'
-and `pcf' drivers.  FreeType 2 now compiles on Epoc again.
-II. CHANGES TO THE HIGH-LEVEL API
-- The library header files inclusion scheme has been changed.  The
-old scheme looked like:
-#include <freetype/freetype.h>
-#include <freetype/ftglyph.h>
-#include <freetype/ftcache.h>
-#include <freetype/cache/ftimage.h>
-Now you should use:
-#include <ft2build.h>
-#include FT_FREETYPE_H
-#include FT_GLYPH_H
-#include FT_CACHE_H
-#include FT_CACHE_IMAGE_H
-NOTE THAT  THE OLD  INCLUSION SCHEME WILL  STILL WORK  WITH THIS
-RELEASE.  HOWEVER, WE  DO NOT GUARANTEE THAT THIS  WILL STILL BE
-TRUE IN THE NEXT ONE (A.K.A. FREETYPE 2.1).
-The  file <ft2build.h>  is used  to define  the  header filename
-macros.  The complete and  commented list of macros is available
-in the API reference under the section name `Header File Macros'
-in Chapter I.
-For more information, see section I of the following document:
-http://www.freetype.org/
-freetype2/docs/tutorial/step1.html
-or
-http://freetype.sourceforge.net/
-freetype2/docs/tutorial/step1.html
-- Many, many comments have been added to the public source file in
-order to  automatically generate  the API Reference  through the
-`docmaker.py' Python script.
-The latter has been updated  to support the grouping of sections
-in chapters and better index sort.  See:
-http://www.freetype.org/freetype2/docs/reference/ft2-toc.html
-III. CHANGES TO THE BUILD PROCESS
-- If you  are not  building FreeType 2  with its own  build system
-(but with your own Makefiles or project files), you will need to
-be  aware that  the  build  process has  changed  a little  bit.
-You don't  need to put the  `src' directory in  the include path
-when  compiling  any FT2  component.   Instead,  simply put  the
-component's directory in the current include path.
-So, if you were doing something like:
-cc -c -Iinclude -Isrc src/base/ftbase.c
-change the line to:
-cc -c -Iinclude -Isrc/base src/base/ftbase.c
-If you were doing something like:
-cd src/base
-cc -c -I../../include -I.. ftbase.c
-change it to:
-cd src/base
-cc -c -I../../include ftbase.c
-======================================================================
-CHANGES BETWEEN 2.0.1 and 2.0
-2.0.1 introduces a few changes:
-- Fixed many bugs related to  the support of CFF / OpenType fonts.
-These  formats are  now much  better supported  though  there is
-still work planned to  deal with charset tables and PDF-embedded
-CFF files that use the old `seac' command.
-- The  library could not  be compiled  in debug  mode with  a very
-small  number   of  C  compilers   whose  pre-processors  didn't
-implement the `##'  directive correctly (i.e. per se  the ANSI C
-specification!)  An elegant fix was found.
-- Added  support for  the  free Borland  command-line C++  Builder
-compiler.   Use `make  setup bcc32'.   Also fixed  a  few source
-lines that generated new warnings with BCC32.
-- Fixed a bug in FT_Outline_Get_BBox when computing the extrema of
-a conic Bezier arc.
-- Updated the INSTALL file to add IDE compilation.
-- Other  minor bug  fixes,  from  invalid Type  1  style flags  to
-correct   support   of  synthetic   (obliqued)   fonts  in   the
-auto-hinter, better support for embedded bitmaps in a SFNT font.
-- Fixed some problems with `freetype-config'.
-Finally, the `standard' scheme for including FreeType headers is now
-gradually changing,  but this will  be explained in a  later release
-(probably 2.0.2).
-And very  special thanks to Tom Kacvinsky  and YAMANO-UCHI Hidetoshi
-for their contributions!
-======================================================================
-CHANGES BETWEEN beta8 and 2.0
-- Changed  the default  installation  path for  public headers  from
-`include/freetype' to `include/freetype2'.
-Also added a new `freetype-config' that is automatically generated
-and installed  on Unix and  Cygwin systems.  The script  itself is
-used to retrieve the current  install path, C compilation flags as
-well as linker flags.
-- Fixed several small bugs:
-* Incorrect max advance width for fixed-pitch Type 1 fonts.
-* Incorrect glyph names for certain TrueType fonts.
-* The  glyph advance  was not  copied when  FT_Glyph_To_Bitmap was
-called.
-* The  linearHoriAdvance  and  linearVertAdvance  fields  were not
-correctly returned for glyphs processed by the auto-hinter.
-* `type1z'  renamed back to  `type1'; the  old `type1'  module has
-been removed.
-- Revamped the  build system  to make it  a lot more  generic.  This
-will  allow us  to  re-use  nearly un-modified  in  lots of  other
-projects (including FreeType Layout).
-- Changed `cid' to use `psaux' too.
-- Added the  cache sub-system.  See <freetype/ftcache.h>  as well as
-the sources  in `src/cache'.  Note  that it compiles but  is still
-untested for now.
-- Updated `docs/docmaker.py', a draft  API reference is available at
-http://www.freetype.org/ft2api.html.
-- Changed `type1' to use `psaux'.
-- Created a  new module named  `psaux' to hold  the Type 1 &  Type 2
-parsing routines.  It should be  used by `type1', `cid', and `cff'
-in the future.
-- Fixed an important bug in `FT_Glyph_Get_CBox'.
-- Fixed  some compiler  warnings  that happened  since the  TrueType
-bytecode decoder was deactivated by default.
-- Fixed two memory leaks:
-* The    memory   manager   (16    bytes)   isn't    released   in
-FT_Done_FreeType!
-* Using custom input streams, the  copy of the original stream was
-never released.
-- Fixed the  auto-hinter by performing automatic  computation of the
-`filling direction' of each glyph.   This is done through a simple
-and  fast approximation, and  seems to  work (problems  spotted by
-Werner though).  The Arphic fonts are a lot nicer though there are
-still a lot of things to do to handle Asian fonts correctly.
-======================================================================
-BETA-8 (RELEASE CANDIDATE) CHANGES
-- Deactivated the TrueType bytecode interpreter by default.
-- Deactivated the `src/type1' font driver.  Now `src/type1z' is used
-by default.
-- Updates to the build system.  We now compile the library correctly
-under  Unix  system  through  `configure' which  is  automatically
-called on the first `make' invocation.
-- Added the auto-hinting module!  Fixing some bugs here and there.
-- Found some bugs in the  composite loader (seac) of the Type1-based
-font drivers.
-- Renamed the directory `freetype2/config' to `freetype2/builds' and
-updated all relevant files.
-- Found a memory leak in the `type1' driver.
-- Incorporated Tom's patches to  support flex operators correctly in
-OpenType/CFF fonts.  Now all I need is to support pure CFF and CEF
-fonts to be done with this driver :-)
-- Added the  Windows FNT/FON driver in `src/winfonts'.   For now, it
-always  `simulates'   a  Unicode  charmap,  so   it  shouldn't  be
-considered completed right now.
-It  is there  to be  more a  proof of  concept than  anything else
-anyway.  The driver is a single  C source file, that compiles to 3
-Kb of code.
-I'm  still working on  the PCF/BDF  drivers, but  I'm too  lazy to
-finish them now.
-- CHANGES TO THE HIGH-LEVEL API
-* FT_Get_Kerning has a new parameter that allows you to select the
-coordinates of the kerning  vector (font units, scaled, scaled +
-grid-fitted).
-* The  outline functions are  now in <freetype/ftoutln.h>  and not
-part of <freetype/freetype.h> anymore.
-* <freetype/ftmodule.h>    now     contains    declarations    for
-FT_New_Library, FT_Done_Library, FT_Add_Default_Modules.
-* The so-called convenience  functions have moved from `ftoutln.c'
-to  `ftglyph.c',  and  are  thus available  with  this  optional
-component    of   the   library.     They   are    declared   in
-<freetype/ftglyph.h> now.
-* Anti-aliased  rendering is now  the default  for FT_Render_Glyph
-(i.e. corresponds to render_mode == 0 == ft_render_mode_normal).
-To generate a monochrome bitmap, use ft_render_mode_mono, or the
-FT_LOAD_MONOCHROME     flag    in    FT_Load_Glyph/FT_Load_Char.
-FT_LOAD_ANTI_ALIAS is still defined, but values to 0.
-* <freetype/freetype.h>  now include <freetype/config/ftconfig.h>,
-solving a few headaches :-)
-* The type FT_GlyphSlotRec has now a `library' field.
-- CHANGES TO THE `ftglyph.h' API
-This API has  been severely modified in order  to make it simpler,
-clearer, and more  efficient.  It certainly now looks  like a real
-`glyph factory'  object, and allows client  applications to manage
-(i.e.  transform,  bbox  and  render) glyph  images  without  ever
-knowing their original format.
-- Added  support  for CID-keyed  fonts  to  the  CFF driver.   Maybe
-support for pure CFF + CEF fonts should come in?
-- Cleaned up  source code in order  to avoid two  functions with the
-same name.  Also  changed the names of the  files in `type1z' from
-`t1XXXX' to `z1XXXX' in order to avoid any conflicts.
-`make multi' now works well :-)
-Also removed the use of `cidafm' for now, even if the source files
-are  still there.  This  functionality will  certainly  go into  a
-specific module.
-- ADDED SUPPORT FOR THE AUTO-HINTER
-It  works :-) I  have a  demo program  which simply  is a  copy of
-`ftview'       that      does       a      `FT_Add_Module(library,
-&autohinter_module_class)' after  library initialization, and Type
-1 & OpenType/CFF fonts are now hinted.
-CID  fonts are  not hinted,  as they  include no  charmap  and the
-auto-hinter doesn't include  `generic' global metrics computations
-yet.
-Now, I need to release this thing to the FreeType 2 source.
-- CHANGES TO THE RENDERER MODULES
-The  monochrome  and smooth  renderers  are  now  in two  distinct
-directories, namely `src/raster1' and `src/smooth'.  Note that the
-old `src/renderer' is now gone.
-I ditched  the 5-gray-levels renderers.  Basically,  it involved a
-simple #define toggle in 'src/raster1/ftraster.c'.
-FT_Render_Glyph,  FT_Outline_Render  &  FT_Outline_Get_Bitmap  now
-select the best renderer  available, depending on render mode.  If
-the current renderer for a  given glyph image format isn't capable
-of supporting  the render mode, another  one will be  found in the
-library's list.   This means that client applications  do not need
-to  switch or  set  the  renderers themselves  (as  in the  latest
-change), they'll get what they want automatically.  At last.
-Changed the demo programs accordingly.
-- MAJOR INTERNAL REDESIGN:
-A lot of internal modifications  have been performed lately on the
-source in order to provide the following enhancements:
-* More generic module support:
-The FT_Module  type is  now defined to  represent a handle  to a
-given  module.   The  file  <freetype/ftmodule.h>  contains  the
-FT_Module_Class definition, as well as the module-loading public
-API.
-The  FT_Driver type  is still  defined, and  still  represents a
-pointer to  a font driver.  Note that  FT_Add_Driver is replaced
-by FT_Add_Module, FT_Get_Driver by FT_Get_Module, etc.
-* Support for generic glyph image types:
-The FT_Renderer  type is a pointer  to a module  used to perform
-various operations on glyph image.
-Each renderer is  capable of handling images in  a single format
-(e.g. ft_glyph_format_outline).  Its functions are used to:
-- transform an glyph image
-- render a glyph image into a bitmap
-- return the control box (dimensions) of a given glyph image
-The scan converters `ftraster.c' and `ftgrays.c' have been moved
-to the new directory `src/renderer', and are used to provide two
-default renderer modules.
-One corresponds  to the `standard' scan-converter,  the other to
-the `smooth' one.
-he  current  renderer  can  be  set  through  the  new  function
-FT_Set_Renderer.
-The old raster-related function FT_Set_Raster, FT_Get_Raster and
-FT_Set_Raster_Mode have now disappeared, in favor of the new:
-FT_Get_Renderer
-FT_Set_Renderer
-See the file <freetype/ftrender.h> for more details.
-These  changes  were  necessary  to properly  support  different
-scalable formats in the future, like bi-color glyphs, etc.
-* Glyph loader object:
-A  new  internal  object,  called  a  'glyph  loader'  has  been
-introduced in the base layer.  It is used by all scalable format
-font drivers to load glyphs and composites.
-This object  has been  created to reduce  the code size  of each
-driver,  as  each  one  of  them  basically  re-implemented  its
-functionality.
-See <freetype/internal/ftobjs.h> and the FT_GlyphLoader type for
-more information.
-* FT_GlyphSlot has new fields:
-In  order   to  support  extended  features   (see  below),  the
-FT_GlyphSlot structure has a few new fields:
-linearHoriAdvance:
-This  field  gives  the   linearly  scaled  (i.e.  scaled  but
-unhinted) advance  width for the  glyph, expressed as  a 16.16
-fixed pixel value.  This is useful to perform WYSIWYG text.
-linearVertAdvance:
-This field  gives the linearly  scaled advance height  for the
-glyph  (relevant in  vertical  glyph layouts  only).  This  is
-useful to perform WYSIWYG text.
-Note that  the two above field replace  the removed `metrics2'
-field in the glyph slot.
-advance:
-This field is a vector  that gives the transformed advance for
-the glyph.   By default, it corresponds to  the advance width,
-unless  FT_LOAD_VERTICAL_LAYOUT  was  specified  when  calling
-FT_Load_Glyph or FT_Load_Char.
-bitmap_left:
-This  field gives  the  distance in  integer  pixels from  the
-current pen position  to the left-most pixel of  a glyph image
-IF IT IS  A BITMAP.  It is only valid  when the `format' field
-is set to `ft_glyph_format_bitmap', for example, after calling
-the new function FT_Render_Glyph.
-bitmap_top:
-This  field gives  the  distance in  integer  pixels from  the
-current pen position (located on the baseline) to the top-most
-pixel of the  glyph image IF IT IS  A BITMAP.  Positive values
-correspond to upwards Y.
-loader:
-This  is a  new  private  field for  the  glyph slot.   Client
-applications should not touch it.
-* Support for transforms and direct rendering in FT_Load_Glyph:
-Most of the functionality found in <freetype/ftglyph.h> has been
-moved to the core library.  Hence, the following:
-- A   transform   can   be   specified  for   a   face   through
-FT_Set_Transform.  this transform  is applied by FT_Load_Glyph
-to  scalable glyph  images (i.e.  NOT TO  BITMAPS)  before the
-function returns, unless the bit flag FT_LOAD_IGNORE_TRANSFORM
-was set in the load flags.
-- Once  a  glyph image  has  been  loaded,  it can  be  directly
-converted  to  a  bitmap  by  using  the  new  FT_Render_Glyph
-function.  Note that this  function takes the glyph image from
-the glyph slot,  and converts it to a  bitmap whose properties
-are returned  in `face.glyph.bitmap', `face.glyph.bitmap_left'
-and `face.glyph.bitmap_top'.  The  original native image might
-be lost after the conversion.
-- When using the new  bit flag FT_LOAD_RENDER, the FT_Load_Glyph
-and   FT_Load_Char   functions   will   call   FT_Render_Glyph
-automatically when needed.
-- Reformatted all  modules source  code in order  to get rid  of the
-basic data types redifinitions (i.e. `TT_Int' instead of `FT_Int',
-`T1_Fixed'  instead  of  `FT_Fixed').  Hence  the  format-specific
-prefixes like  `TT_', `T1_',  `T2_' and `CID_'  are only  used for
-relevant structures.
-======================================================================
-OLD CHANGES FOR BETA 7
-- bug-fixed the  OpenType/CFF parser.  It  now loads and displays my
-two  fonts nicely,  but I'm  pretty certain  that more  testing is
-needed :-)
-- fixed the crummy Type 1 hinter, it now handles accented characters
-correctly (well, the accent is  not always well placed, but that's
-another problem..)
-- added the CID-keyed Type 1 driver in `src/cid'.  Works pretty well
-for only 13 Kb of code  ;-) Doesn't read AFM files though, nor the
-really useful CMAP files..
-- fixed  two  bugs  in  the  smooth  renderer  (src/base/ftgrays.c).
-Thanks to Boris Letocha for spotting them and providing a fix.
-- fixed potential `divide by zero' bugs in ftcalc.c.
-- added source  code for  the OpenType/CFF driver  (still incomplete
-though..)
-- modified the  SFNT driver slightly  to perform more  robust header
-checks  in TT_Load_SFNT_Header.  This prevents certain  font files
-(e.g.  some  Type  1  Multiple  Masters)  from  being  incorrectly
-`recognized' as TrueType font files..
-- moved a lot of stuff from  the TrueType driver to the SFNT module,
-this   allows   greater   code   re-use   between   font   drivers
-(e.g. TrueType, OpenType, Compact-TrueType, etc..)
-- added a tiny segment cache to the SFNT Charmap 4 decoder, in order
-to minimally speed it up..
-- added  support for  Multiple Master  fonts in  `type1z'.  There is
-also a new file named <freetype/ftmm.h> which defines functions to
-manage them from client applications.
-The new file `src/base/ftmm.c' is also optional to the engine..
-- various  formatting changes (e.g.  EXPORT_DEF ->  FT_EXPORT_DEF) +
-small bug fixes in FT_Load_Glyph, the `type1' driver, etc..
-- a minor fix to the Type 1 driver to let them apply the font matrix
-correctly (used for many oblique fonts..)
-- some fixes for 64-bit systems (mainly changing some FT_TRACE calls
-to use %p instead of %lx).  Thanks to Karl Robillard.
-- fixed  some bugs  in  the sbit  loader (src/base/sfnt/ttsbit.c)  +
-added  a new flag,  FT_LOAD_CROP_BITMAP to  query that  bitmaps be
-cropped when  loaded from a file  (maybe I should  move the bitmap
-cropper to the base layer ??).
-- changed the default  number of gray levels of  the smooth renderer
-to 256  (instead of  the previous 128).  Of course, the  human eye
-can't see any difference ;-)
-- removed TT_MAX_SUBGLYPHS,  there is no static limit  on the number
-of subglyphs in a TrueType font now..
-======================================================================
-OLD CHANGES 16 May 2000
-- tagged `BETA-6'  in the  CVS tree.  This one is a  serious release
-candidate even though it doesn't incorporate the auto-hinter yet..
-- various obsolete files were removed, and copyright header updated
-- finally  updated  the  standard   raster  to  fix  the  monochrome
-rendering bug + re-enable  support for 5-gray levels anti-aliasing
-(suck, suck..)
-- created new header files, and modified sources accordingly:
-<freetype/fttypes.h>
-- simple FreeType types, without the API
-<freetype/internal/ftmemory.h>
-- definition of memory-management macros
-- added   the   `DSIG'   (OpenType   Digital   Signature)   tag   to
-<freetype/tttags.h>
-- light update/cleaning of the build system + changes to the sources
-in  order  to  get  rid  of _all_  compiler  warnings  with  three
-compilers, i.e:
-gcc with `-ansi -pedantic -Wall -W', Visual C++ with `/W3 /WX' and
-LCC
-IMPORTANT NOTE FOR WIN32-LCC USERS:
-|
-|  It seems the C pre-processor  that comes with LCC is broken, it
-|  doesn't  recognize  the  ANSI  standard  directives  #  and  ##
-|  correctly   when  one  of   the  argument  is  a  macro.  Also,
-|  something like:
-|
-|     #define F(x)  print##x
-|
-|     F(("hello"))
-|
-|  will get incorrectly translated to:
-|
-|     print "hello")
-|
-|  by its pre-processor.  For this reason, you simply cannot build
-|  FreeType 2 in debug mode with this compiler..
-- yet  another massive grunt work.  I've  changed the  definition of
-the EXPORT_DEF,  EXPORT_FUNC, BASE_DEF &  BASE_FUNC macros.  These
-now take an argument, which is the function's return value type.
-This  is necessary to  compile FreeType  as a  DLL on  Windows and
-OS/2.  Depending on the compiler used, a compiler-specific keyword
-like  __export or __system  must be  placed before  (VisualC++) or
-after (BorlandC++) the type..
-Of course, this needed a lot of changes throughout the source code
-to make it compile again...  All cleaned up now, apparently..
-Note also  that there is a  new EXPORT_VAR macro  defined to allow
-the   _declaration_    of   an   exportable    public   (constant)
-variable.  This  is  the   case  of  the  raster  interfaces  (see
-ftraster.h and ftgrays.h), as well as each module's interface (see
-sfdriver.h, psdriver.h, etc..)
-- new feature: it  is now possible to pass  extra parameters to font
-drivers  when creating  a new  face object.  For now,
-this capability is unused.  It could however prove to
-be useful in a near future..
-the FT_Open_Args structure was  changes, as well as the internal
-driver interface  (the specific `init_face'  module function has
-now a different signature).
-- updated the tutorial (not finished though).
-- updated the top-level BUILD  document
-- fixed  a  potential memory  leak  that  could  occur when  loading
-embedded bitmaps.
-- added     the     declaration     of     FT_New_Memory_Face     in
-<freetype/freetype.h>, as  it was  missing from the  public header
-(the implementation was already in `ftobjs.c').
-- the file <freetype/fterrors.h> has been seriously updated in order
-to allow  the automatic generation  of error message tables.   See
-the comments within it for more information.
-- major directory  hierarchy re-organisation.  This was done for two
-things:
-* first,  to ease  the `manual'  compilation of  the  library by
-requiring at lot less include paths :-)
-* second,  to  allow  external  programs to  effectively  access
-internal  data  fields.  For example,  this  can be  extremely
-useful if  someone wants  to write a  font producer or  a font
-manager on top of FreeType.
-Basically, you  should now use  the 'freetype/' prefix  for header
-inclusion, as in:
-#include <freetype/freetype.h>
-#include <freetype/ftglyph.h>
-Some new include sub-directories are available:
-a. the  `freetype/config' directory,  contains two files  used to
-configure  the  build  of  the  library.  Client  applications
-should  not need  to look  at these  normally, but they can if
-they want.
-#include <freetype/config/ftoption.h>
-#include <freetype/config/ftconfig.h>
-b. the `freetype/internal'  directory, contains header files that
-describes library  internals.  These are the header files that
-were  previously  found  in  the `src/base'  and  `src/shared'
-directories.
-As  usual, the build  system and  the demos  have been  updated to
-reflect the change..
-Here's a layout of the new directory hierarchy:
-TOP_DIR
-include/
-freetype/
-freetype.h
-...
-config/
-ftoption.h
-ftconfig.h
-ftmodule.h
-internal/
-ftobjs.h
-ftstream.h
-ftcalc.h
-...
-src/
-base/
-...
-sfnt/
-psnames/
-truetype/
-type1/
-type1z/
-Compiling a module is now  much easier, for example, the following
-should work when in the TOP_DIR directory on an ANSI build:
-gcc -c -I./include -I./src/base src/base/ftbase.c
-gcc -c -I./include -I./src/sfnt src/sfnt/sfnt.c
-etc..
-(of course, using -Iconfig/<system> if you provide system-specific
-configuration files).
-- updated the structure of FT_Outline_Funcs in order to allow direct
-coordinate scaling within  the outline decomposition routine (this
-is  important for virtual  `on' points  with TrueType  outlines) +
-updates to the rasters to support this..
-- updated  the OS/2  table  loading code  in `src/sfnt/ttload.c'  in
-order to support version 2 of the table (see OpenType 1.2 spec)
-- created  `include/tttables.h'  and  `include/t1tables.h' to  allow
-client applications to access some of  the SFNT and T1 tables of a
-face  with  a  procedural  interface (see  `FT_Get_Sfnt_Table')  +
-updates to internal source files to reflect the change..
-- some  cleanups in  the source  code to  get rid  of  warnings when
-compiling with the `-Wall -W -ansi -pedantic' options in gcc.
-- debugged and moved the smooth renderer to `src/base/ftgrays.c' and
-its header to `include/ftgrays.h'
-- updated TT_MAX_SUBGLYPHS  to 96 as some CJK  fonts have composites
-with up to 80 sub-glyphs !! Thanks to Werner
-======================================================================
-OLD CHANGES - 14-apr-2000
-- fixed  a bug  in  the  TrueType glyph  loader  that prevented  the
-correct loading of some CJK glyphs in mingli.ttf
-- improved the standard Type 1 hinter in `src/type1'
-- fixed two bugs  in the experimental Type 1  driver in `src/type1z'
-to handle the new XFree86 4.0 fonts (and a few other ones..)
-- the smooth  renderer is now  complete and supports  sub-banding to
-render large glyphs  at high speed.  However, it is still  located
-in `demos/src/ftgrays.c' and should move to the  library itself in
-the next  beta.  NOTE: The  smooth  renderer  doesn't  compile  in
-stand-alone mode anymore, but this should be fixed RSN..
-- introduced convenience  functions to  more easily deal  with glyph
-images, see  `include/ftglyph.h' for more details, as  well as the
-new  demo program  named `demos/src/ftstring.c'  that demonstrates
-its use
-- implemented  FT_LOAD_NO_RECURSE in  both the  TrueType and  Type 1
-drivers  (this  is required  by  the  auto-hinter  to improve  its
-results).
-- changed   the  raster   interface,  in   order  to   allow  client
-applications  to   provide  their   own  span-drawing   callbacks.
-However,   only   the   smooth   renderer   supports   this.   See
-`FT_Raster_Params' in the file `include/ftimage.h'.
-- fixed  a small bug  in FT_MulFix  that caused  incorrect transform
-computation!
-- Note: The tutorial is out-of-date.
-======================================================================
-OLD CHANGES - 12-mar-2000
-- changed  the  layout  of  configuration  files  :  now,  all  ANSI
-configuration         files         are         located         in
-`freetype2/config'.  System-specific over-rides  can be  placed in
-`freetype2/config/<system>'.
-- moved all configuration macros to `config/ftoption.h'
-- improvements in the Type 1 driver with AFM support
-- changed the fields  in the FT_Outline structure :  the old `flags'
-array is re-named `tags', while all ancient flags are encoded into
-a single unsigned int named `flags'.
-- introduced     new      flags     in     FT_Outline.flags     (see
-ft_outline_.... enums in `ftimage.h').
-- changed outline functions to `FT_Outline_<action>' syntax
-- added a smooth anti-alias renderer to the demonstration programs
-- added Mac graphics driver (thanks Just)
-- FT_Open_Face  changed  in  order   to  received  a  pointer  to  a
-FT_Open_Args descriptor..
-- various  cleanups,  a  few  more API  functions  implemented  (see
-FT_Attach_File)
-- updated some docs
-======================================================================
-OLD CHANGES - 22-feb-2000
-- introduced the `psnames' module.  It is used to:
-o convert  a Postscript glyph  name into the  equivalent Unicode
-character code (used by the  Type 1 driver(s) to synthesize on
-the fly a Unicode charmap).
-o provide an  interface to retrieve the Postscript  names of the
-Macintosh,  Adobe  Standard &  Adobe  Expert character  codes.
-(the Macintosh  names are  used by the  SFNT-module postscript
-names support routines, while the other two tables are used by
-the Type 1 driver(s)).
-- introduced the `type1z' alternate Type 1 driver.  This is a (still
-experimental) driver  for the Type  1 format that  will ultimately
-replace the one  in `src/type1'.  It uses pattern matching to load
-data from the font, instead of a finite  state analyzer.  It works
-much better than the `old' driver with `broken' fonts.  It is also
-much smaller (under 15 Kb).
-- the  Type 1  drivers (both  in `src/type1'  and  `src/type1z') are
-nearly  complete.  They  both  provide automatic  Unicode  charmap
-synthesis through  the `psnames' module.  No re-encoding vector is
-needed.  (note  that they  still  leak  memory  due to  some  code
-missing, and I'm getting lazy).
-Trivial AFM support has been added to read kerning information but
-wasn't exactly tested as it should ;-)
-- The TrueType  glyph loader has  been seriously rewritten  (see the
-file  `src/truetype/ttgload.c'.  It is now  much, much  simpler as
-well as  easier to read,  maintain and understand  :-) Preliminary
-versions introduced a  memory leak that has been  reported by Jack
-Davis, and is now fixed..
-- introduced  the new  `ft_glyph_format_plotter', used  to represent
-stroked outlines  like Windows `Vector' fonts, and  certain Type 1
-fonts  like `Hershey'.  The corresponding  raster will  be written
-soon.
-- FT_New_Memory_Face  is  gone.  Likewise,  FT_Open_Face has  a  new
-interface that uses a structure  to describe the input stream, the
-driver (if required), etc..
-TODO
-- Write FT_Get_Glyph_Bitmap and FT_Load_Glyph_Bitmap
-- Add a function like FT_Load_Character(face, char_code, load_flags)
-that  would   really  embed  a  call   to  FT_Get_Char_Index  then
-FT_Load_Glyph to ease developer's work.
-- Update the tutorial!
-- consider adding  support for Multiple  Master fonts in the  Type 1
-drivers.
-- Test the AFM routines of the  Type 1 drivers to check that kerning
-information is returned correctly.
-- write a decent auto-gridding component  !! We need this to release
-FreeType 2.0 gold !
-less urgent needs:
-- add a CFF/Type2 driver
-- add a BDF driver
-- add a FNT/PCF/HBF driver
-- add a Speedo driver from the X11 sources
-======================================================================
-OLDER CHANGES - 27-jan-2000
-- updated the  `sfnt' module  interface to allow  several SFNT-based
-drivers to co-exist peacefully
-- updated  the `T1_Face'  type  to better  separate Postscript  font
-content  from the  rest of  the FT_Face  structure.  Might be used
-later by the CFF/Type2 driver..
-- added an experimental replacement Type 1 driver featuring advanced
-(and speedy) pattern matching to retrieve the data from postscript
-fonts.
-- very minor  changes in the implementation  of FT_Set_Char_Size and
-FT_Set_Pixel_Sizes (they now implement default to lighten the font
-driver's code).
-======================================================================
-OLD MESSAGE
-This file summarizes the changes  that occurred  since the last `beta'
-of FreeType 2. Because the list is important, it has been divided into
-separate sections:
-Table Of Contents:
-I   High-Level Interface (easier !)
-II   Directory Structure
-III   Glyph Image Formats
-IV   Build System
-V   Portability
-VI   Font Drivers
-----------------------------------------------------------------------
-High-Level Interface:
-The high-level API has been considerably simplified.  Here is how:
-- resource objects have disappeared.  this means that face objects
-can now be created with  a single function call (see FT_New_Face
-and FT_Open_Face)
-- when calling  either FT_New_Face  & FT_Open_Face, a  size object
-and a glyph slot object  are automatically created for the face,
-and can  be accessed  through `face->glyph' and  `face->size' if
-one really  needs to.   In most cases,  there's no need  to call
-FT_New_Size or FT_New_Glyph.
-- similarly,  FT_Load_Glyph  now  only  takes  a  `face'  argument
-(instead  of a  glyph  slot  and a  size).  Also,  its  `result'
-parameter is  gone, as the glyph  image type is  returned in the
-field `face->glyph.format'
-- the list  of available  charmaps is directly  accessible through
-`face->charmaps', counting `face->num_charmaps'  elements.  Each
-charmap  has an  'encoding'  field which  specifies which  known
-encoding it deals with.  Valid values are, for example:
-ft_encoding_unicode      (for ASCII, Latin-1 and Unicode)
-ft_encoding_apple_roman
-ft_encoding_sjis
-ft_encoding_adobe_standard
-ft_encoding_adobe_expert
-other  values may  be added  in the  future.  Each charmap still
-holds  its `platform_id'  and `encoding_id'  values in  case the
-encoding is too exotic for the current library
-----------------------------------------------------------------------
-Directory Structure:
-Should seem obvious to most of you:
-freetype/
-config/        -- configuration sub-makefiles
-ansi/
-unix/       -- platform-specific configuration files
-win32/
-os2/
-msdos/
-include/       -- public header  files, those to  be included
-directly by client apps
-src/           -- sources of the library
-base/        -- the base layer
-sfnt/        -- the sfnt `driver'  (see the drivers section
-below)
-truetype/    -- the truetype driver
-type1/       -- the type1 driver
-shared/      -- some header files shared between drivers
-demos/         -- demos/tools
-docs/          -- documentation (a bit empty for now)
-----------------------------------------------------------------------
-Glyph Image Formats:
-Drivers are now able to  register new glyph image formats within the
-library.  For  now, the  base layer supports  of course  bitmaps and
-vector  outlines, but  one  could imagine  something different  like
-colored bitmaps, bi-color vectors or whatever else (Metafonts anyone
-??).
-See  the   file  `include/ftimage.h'.   Note  also  that   the  type
-FT_Raster_Map  is gone,  and  is now  replaced  by FT_Bitmap,  which
-should encompass all known bitmap types.
-Each new  image format  must provide at  least one `raster',  i.e. a
-module capable of  transforming the glyph image into a bitmap.  It's
-also possible  to change the default  raster used for  a given glyph
-image format.
-The default outline  scan-converter now uses 128 levels  of grays by
-default,  which tends  to smooth  many  things.  Note that the  demo
-programs have been updated significantly in order to display these..
-----------------------------------------------------------------------
-Build system:
-You still need  GNU Make to build the library.  The build system has
-been very seriously re-vamped in order to provide things like :
-- automatic host platform  detection (reverting to 'config/ansi' if
-it is not detected, with pseudo-standard compilation flags)
-- the ability to compile from the Makefiles with very different and
-exotic compilers.  Note that linking the library can be difficult
-for some platforms.
-For example, the file `config/win32/lcclib.bat' is invoked by the
-build system to create the `.lib' file with LCC-Win32 because its
-librarian  has too  many flaws  to be  invoked directly  from the
-Makefile.
-Here's how it works:
-- the first time you type `make',  the build system runs a series of
-sub-makefiles  in order  to detect  your host  platform.  It  then
-dumps what it found, and creates a file called `config.mk' in  the
-current  directory.  This is a  sub-Makefile used  to  define many
-important Make variables used to build the library.
-- the second time, the build system detects the `config.mk' then use
-it  to  build the  library.  All object  files  go  into 'obj'  by
-default,  as well  as the  library file,  but this  can  easily be
-changed.
-Note that  you can run `make  setup' to force  another host platform
-detection  even   if  a  `config.mk'  is  present   in  the  current
-directory.  Another solution  is  simply to  delete  the file,  then
-re-run make.
-Finally, the  default compiler  for all platforms  is gcc  (for now,
-this will hopefully changed in the future).  You can however specify
-a different  compiler by specifying  it after the 'setup'  target as
-in:
-gnumake setup lcc         on Win32 to use the LCC compiler
-gnumake setup visualc     on Win32 to use Visual C++
-See  the file  `config/<system>/detect.mk' for  a list  of supported
-compilers for your platforms.
-It should be relatively easy  to write new detection rules files and
-config.mk..
-Finally, to  build the demo programs,  go to `demos'  and launch GNU
-Make, it will use the `config.mk'  in the top directory to build the
-test programs..
-----------------------------------------------------------------------
-Portability:
-In  the  previous  beta,  a  single FT_System  object  was  used  to
-encompass  all  low-level  operations like  thread  synchronisation,
-memory management and i/o access.  This has been greatly simplified:
-- thread synchronisation  has been dropped, for  the simple reason
-that the library  is already re-entrant, and that  if you really
-need  two  threads accessing  the  same  FT_Library, you  should
-really synchronize access to it yourself with a simple mutex.
-- memory  management is  performed  through a  very simple  object
-called `FT_Memory',  which really is a table  containing a table
-of pointers to  functions like malloc, realloc and  free as well
-as some user data (closure).
-- resources have disappeared (they created more problems than they
-solved), and  i/o management have  been simplified greatly  as a
-result.  Streams are  defined through  FT_Stream objects,  which
-can be either memory-based or disk-based.
-Note that  each face  has its own  stream, which is  closed only
-when  the  face object  is  destroyed.  Hence,  a function  like
-TT_Flush_Face in 1.x cannot be directly  supported.  However, if
-you really need something like  this, you can easily tailor your
-own streams  to achieve the same  feature at a  lower level (and
-use FT_Open_Face instead of FT_New_Face to create the face).
-See the file  `include/ftsystem.h' for more details, as  well as the
-implementations found in `config/unix' and `config/ansi'.
-----------------------------------------------------------------------
-Font Drivers:
-The  Font Driver  interface has  been modified  in order  to support
-extensions & versioning.
-The  list of  the font  drivers that  are statically  linked  to the
-library at compile time is  managed through a new configuration file
-called `config/<platform>/ftmodule.h'.
-This  file is  autogenerated  when  invoking  `make modules'.   This
-target  will  parse  all  sub-directories  of  'src', looking  for a
-`module.mk' rules  file, used  to describe  the driver to  the build
-system.
-Hence, one  should call  `make modules' each  time a font  driver is
-added or removed from the `src' directory.
-Finally, this  version  provides  a `pseudo-driver'  in  `src/sfnt'.
-This  driver  doesn't  support  font  files  directly, but  provides
-services used by all TrueType-like font drivers.  Hence, its code is
-shared between  the TrueType & OpenType  font formats,  and possibly
-more formats to come if we're lucky..
-----------------------------------------------------------------------
-Extensions support:
-The extensions support is inspired by the one found in 1.x.
-Now, each font driver has  its own `extension registry', which lists
-which extensions  are available  for the font  faces managed  by the
-driver.
-Extension ids are  now strings, rather than 4-byte  tags, as this is
-usually more readable.
-Each extension has:
-- some data, associated to each face object
-- an interface (table of function pointers)
-An extension  that is format-specific should  simply register itself
-to the correct font driver.  Here is some example code:
-// Registering an extensions
-//
-FT_Error  FT_Init_XXXX_Extension( FT_Library  library )
-{
-FT_DriverInterface*  tt_driver;
-driver = FT_Get_Driver( library, "truetype" );
-if (!driver) return FT_Err_Unimplemented_Feature;
-return FT_Register_Extension( driver, &extension_class );
-}
-// Implementing the extensions
-//
-FT_Error  FT_Proceed_Extension_XXX( FT_Face  face )
-{
-FT_XXX_Extension            ext;
-FT_XXX_Extension_Interface  ext_interface;
-ext = FT_Get_Extension( face, "extensionid", &ext_interface );
-if (!ext) return error;
-return ext_interface->do_it(ext);
-}
-------------------------------------------------------------------------
-Copyright 2000-2011 by
-David Turner, Robert Wilhelm, and Werner Lemberg.
-This  file  is  part  of the  FreeType  project, and may  only be  used,
-modified,  and  distributed  under  the  terms of  the FreeType  project
-license, LICENSE.TXT.   By continuing to use, modify, or distribute this
-file you  indicate that  you have  read the  license and understand  and
-accept it fully.
-Local Variables:
-version-control: never
-coding: utf-8
-End:
---- end of CHANGES ---

changeset 9431	0f5961910e27
parent 9357	a501f5ec7b34
parent 9429	7a97a554ac80
child 9433	f0a8ac191839