--- a/misc/libfreetype/include/freetype/ftmoderr.h Fri Oct 11 11:55:31 2013 +0200
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,156 +0,0 @@
-/***************************************************************************/
-/* */
-/* ftmoderr.h */
-/* */
-/* FreeType module error offsets (specification). */
-/* */
-/* Copyright 2001, 2002, 2003, 2004, 2005, 2010 by */
-/* David Turner, Robert Wilhelm, and Werner Lemberg. */
-/* */
-/* This file is part of the FreeType project, and may only be used, */
-/* modified, and distributed under the terms of the FreeType project */
-/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
-/* this file you indicate that you have read the license and */
-/* understand and accept it fully. */
-/* */
-/***************************************************************************/
-
-
- /*************************************************************************/
- /* */
- /* This file is used to define the FreeType module error offsets. */
- /* */
- /* The lower byte gives the error code, the higher byte gives the */
- /* module. The base module has error offset 0. For example, the error */
- /* `FT_Err_Invalid_File_Format' has value 0x003, the error */
- /* `TT_Err_Invalid_File_Format' has value 0x1103, the error */
- /* `T1_Err_Invalid_File_Format' has value 0x1203, etc. */
- /* */
- /* Undefine the macro FT_CONFIG_OPTION_USE_MODULE_ERRORS in ftoption.h */
- /* to make the higher byte always zero (disabling the module error */
- /* mechanism). */
- /* */
- /* It can also be used to create a module error message table easily */
- /* with something like */
- /* */
- /* { */
- /* #undef __FTMODERR_H__ */
- /* #define FT_MODERRDEF( e, v, s ) { FT_Mod_Err_ ## e, s }, */
- /* #define FT_MODERR_START_LIST { */
- /* #define FT_MODERR_END_LIST { 0, 0 } }; */
- /* */
- /* const struct */
- /* { */
- /* int mod_err_offset; */
- /* const char* mod_err_msg */
- /* } ft_mod_errors[] = */
- /* */
- /* #include FT_MODULE_ERRORS_H */
- /* } */
- /* */
- /* To use such a table, all errors must be ANDed with 0xFF00 to remove */
- /* the error code. */
- /* */
- /*************************************************************************/
-
-
-#ifndef __FTMODERR_H__
-#define __FTMODERR_H__
-
-
- /*******************************************************************/
- /*******************************************************************/
- /***** *****/
- /***** SETUP MACROS *****/
- /***** *****/
- /*******************************************************************/
- /*******************************************************************/
-
-
-#undef FT_NEED_EXTERN_C
-
-#ifndef FT_MODERRDEF
-
-#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS
-#define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = v,
-#else
-#define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = 0,
-#endif
-
-#define FT_MODERR_START_LIST enum {
-#define FT_MODERR_END_LIST FT_Mod_Err_Max };
-
-#ifdef __cplusplus
-#define FT_NEED_EXTERN_C
- extern "C" {
-#endif
-
-#endif /* !FT_MODERRDEF */
-
-
- /*******************************************************************/
- /*******************************************************************/
- /***** *****/
- /***** LIST MODULE ERROR BASES *****/
- /***** *****/
- /*******************************************************************/
- /*******************************************************************/
-
-
-#ifdef FT_MODERR_START_LIST
- FT_MODERR_START_LIST
-#endif
-
-
- FT_MODERRDEF( Base, 0x000, "base module" )
- FT_MODERRDEF( Autofit, 0x100, "autofitter module" )
- FT_MODERRDEF( BDF, 0x200, "BDF module" )
- FT_MODERRDEF( Bzip2, 0x300, "Bzip2 module" )
- FT_MODERRDEF( Cache, 0x400, "cache module" )
- FT_MODERRDEF( CFF, 0x500, "CFF module" )
- FT_MODERRDEF( CID, 0x600, "CID module" )
- FT_MODERRDEF( Gzip, 0x700, "Gzip module" )
- FT_MODERRDEF( LZW, 0x800, "LZW module" )
- FT_MODERRDEF( OTvalid, 0x900, "OpenType validation module" )
- FT_MODERRDEF( PCF, 0xA00, "PCF module" )
- FT_MODERRDEF( PFR, 0xB00, "PFR module" )
- FT_MODERRDEF( PSaux, 0xC00, "PS auxiliary module" )
- FT_MODERRDEF( PShinter, 0xD00, "PS hinter module" )
- FT_MODERRDEF( PSnames, 0xE00, "PS names module" )
- FT_MODERRDEF( Raster, 0xF00, "raster module" )
- FT_MODERRDEF( SFNT, 0x1000, "SFNT module" )
- FT_MODERRDEF( Smooth, 0x1100, "smooth raster module" )
- FT_MODERRDEF( TrueType, 0x1200, "TrueType module" )
- FT_MODERRDEF( Type1, 0x1300, "Type 1 module" )
- FT_MODERRDEF( Type42, 0x1400, "Type 42 module" )
- FT_MODERRDEF( Winfonts, 0x1500, "Windows FON/FNT module" )
-
-
-#ifdef FT_MODERR_END_LIST
- FT_MODERR_END_LIST
-#endif
-
-
- /*******************************************************************/
- /*******************************************************************/
- /***** *****/
- /***** CLEANUP *****/
- /***** *****/
- /*******************************************************************/
- /*******************************************************************/
-
-
-#ifdef FT_NEED_EXTERN_C
- }
-#endif
-
-#undef FT_MODERR_START_LIST
-#undef FT_MODERR_END_LIST
-#undef FT_MODERRDEF
-#undef FT_NEED_EXTERN_C
-
-
-#endif /* __FTMODERR_H__ */
-
-
-/* END */