extern crate integral_geometry;
extern crate vec2d;

use std::{cmp, mem::replace};

use integral_geometry::{ArcPoints, EquidistantPoints, LinePoints, Point};

pub struct Land2D<T> {
    pixels: vec2d::Vec2D<T>,
    width_mask: usize,
    height_mask: usize,
}

impl<T: Copy + PartialEq> Land2D<T> {
    pub fn new(width: usize, height: usize, fill_value: T) -> Self {
        assert!(width.is_power_of_two());
        assert!(height.is_power_of_two());

        Self {
            pixels: vec2d::Vec2D::new(width, height, fill_value),
            width_mask: !(width - 1),
            height_mask: !(height - 1),
        }
    }

    #[inline]
    pub fn width(&self) -> usize {
        self.pixels.width()
    }

    #[inline]
    pub fn height(&self) -> usize {
        self.pixels.height()
    }

    #[inline]
    pub fn is_valid_x(&self, x: i32) -> bool {
        (x as usize & self.width_mask) == 0
    }

    #[inline]
    pub fn is_valid_y(&self, y: i32) -> bool {
        (y as usize & self.height_mask) == 0
    }

    #[inline]
    pub fn is_valid_coordinate(&self, x: i32, y: i32) -> bool {
        self.is_valid_x(x) && self.is_valid_y(y)
    }

    #[inline]
    pub fn map<U: Default, F: FnOnce(&mut T) -> U>(&mut self, y: i32, x: i32, f: F) -> U {
        if self.is_valid_coordinate(x, y) {
            unsafe {
                // hey, I just checked that coordinates are valid!
                f(self.pixels.get_unchecked_mut(y as usize, x as usize))
            }
        } else {
            U::default()
        }
    }

    #[inline]
    pub fn map_point<U: Default, F: FnOnce(&mut T) -> U>(&mut self, point: Point, f: F) -> U {
        self.map(point.y, point.x, f)
    }

    pub fn fill_from_iter<I>(&mut self, i: I, value: T) -> usize
    where
        I: std::iter::Iterator<Item = Point>,
    {
        i.map(|p| {
            self.map(p.y, p.x, |v| {
                *v = value;
                1
            })
        }).count()
    }

    pub fn draw_line(&mut self, from: Point, to: Point, value: T) -> usize {
        self.fill_from_iter(LinePoints::new(from, to), value)
    }

    pub fn fill(&mut self, start_x: i32, start_y: i32, border_value: T, fill_value: T) {
        debug_assert!(self.is_valid_coordinate(start_x - 1, start_y));
        debug_assert!(self.is_valid_coordinate(start_x, start_y));

        let mut stack: Vec<(usize, usize, usize, isize)> = Vec::new();
        fn push<T: Copy + PartialEq>(
            land: &Land2D<T>,
            stack: &mut Vec<(usize, usize, usize, isize)>,
            xl: usize,
            xr: usize,
            y: usize,
            dir: isize,
        ) {
            let yd = y as isize + dir;

            if land.is_valid_coordinate(0, yd as i32) {
                stack.push((xl, xr, yd as usize, dir));
            }
        };

        let start_x_l = (start_x - 1) as usize;
        let start_x_r = start_x as usize;
        push(self, &mut stack, start_x_l, start_x_r, start_y as usize, -1);
        push(self, &mut stack, start_x_l, start_x_r, start_y as usize, 1);

        loop {
            let a = stack.pop();
            match a {
                None => return,
                Some(a) => {
                    let (mut xl, mut xr, y, mut dir) = a;

                    while xl > 0 && self
                        .pixels
                        .get(y, xl)
                        .map_or(false, |v| *v != border_value && *v != fill_value)
                    {
                        xl -= 1;
                    }

                    while xr < self.width() - 1 && self
                        .pixels
                        .get(y, xr)
                        .map_or(false, |v| *v != border_value && *v != fill_value)
                    {
                        xr += 1;
                    }

                    while xl < xr {
                        while xl <= xr
                            && (self.pixels[y][xl] == border_value
                                || self.pixels[y][xl] == fill_value)
                        {
                            xl += 1;
                        }

                        let mut x = xl;

                        while xl <= xr
                            && (self.pixels[y][xl] != border_value
                                && self.pixels[y][xl] != fill_value)
                        {
                            self.pixels[y][xl] = fill_value;

                            xl += 1;
                        }

                        if x < xl {
                            push(self, &mut stack, x, xl - 1, y, dir);
                            push(self, &mut stack, x, xl - 1, y, -dir);
                        }
                    }
                }
            }
        }
    }

    #[inline]
    fn fill_circle_line<F: Fn(&mut T) -> usize>(
        &mut self,
        y: i32,
        x_from: i32,
        x_to: i32,
        f: &F,
    ) -> usize {
        let mut result = 0;

        if self.is_valid_y(y) {
            for i in cmp::min(x_from, 0) as usize..cmp::max(x_to as usize, self.width() - 1) {
                unsafe {
                    // coordinates are valid at this point
                    result += f(self.pixels.get_unchecked_mut(y as usize, i));
                }
            }
        }

        result
    }

    #[inline]
    fn fill_circle_lines<F: Fn(&mut T) -> usize>(
        &mut self,
        x: i32,
        y: i32,
        dx: i32,
        dy: i32,
        f: &F,
    ) -> usize {
        self.fill_circle_line(y + dy, x - dx, x + dx, f)
            + self.fill_circle_line(y - dy, x - dx, x + dx, f)
            + self.fill_circle_line(y + dx, x - dy, x + dy, f)
            + self.fill_circle_line(y - dx, x - dy, x + dy, f)
    }

    pub fn change_round<F: Fn(&mut T) -> usize>(
        &mut self,
        x: i32,
        y: i32,
        radius: i32,
        f: F,
    ) -> usize {
        ArcPoints::new(radius)
            .map(&mut |p: Point| self.fill_circle_lines(x, y, p.x, p.y, &f))
            .sum()
    }

    pub fn draw_thick_line(&mut self, from: Point, to: Point, radius: i32, value: T) -> usize {
        let mut result = 0;

        for point in LinePoints::new(from, to) {
            for vector in ArcPoints::new(radius) {
                for delta in EquidistantPoints::new(vector) {
                    self.map_point(point + delta, |p|
                        result += (replace(p, value) != value) as usize)
                }
            }
        }

        result
    }
}

#[cfg(test)]
mod tests {
    use super::*;

    #[test]
    fn basics() {
        let l: Land2D<u8> = Land2D::new(32, 64, 0);

        assert!(l.is_valid_coordinate(0, 0));
        assert!(!l.is_valid_coordinate(-1, -1));

        assert!(l.is_valid_coordinate(31, 63));
        assert!(!l.is_valid_coordinate(32, 63));
        assert!(!l.is_valid_coordinate(31, 64));
    }

    #[test]
    fn fill() {
        let mut l: Land2D<u8> = Land2D::new(128, 128, 0);

        l.draw_line(Point::new(0, 0), Point::new(32, 96), 1);
        l.draw_line(Point::new(32, 96), Point::new(64, 32), 1);
        l.draw_line(Point::new(64, 32), Point::new(96, 80), 1);
        l.draw_line(Point::new(96, 80), Point::new(128, 0), 1);

        l.draw_line(Point::new(0, 128), Point::new(64, 96), 1);
        l.draw_line(Point::new(128, 128), Point::new(64, 96), 1);

        l.fill(32, 32, 1, 2);
        l.fill(16, 96, 1, 3);
        l.fill(60, 100, 1, 4);

        assert_eq!(l.pixels[0][0], 1);
        assert_eq!(l.pixels[96][64], 1);

        assert_eq!(l.pixels[40][32], 2);
        assert_eq!(l.pixels[40][96], 2);
        assert_eq!(l.pixels[5][0], 3);
        assert_eq!(l.pixels[120][0], 3);
        assert_eq!(l.pixels[5][127], 3);
        assert_eq!(l.pixels[120][127], 3);
        assert_eq!(l.pixels[35][64], 3);
        assert_eq!(l.pixels[120][20], 4);
        assert_eq!(l.pixels[120][100], 4);
        assert_eq!(l.pixels[100][64], 4);
    }
}