diff -r 4590dca73904 -r ca07e6be08d0 misc/winutils/include/SDL_video.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/misc/winutils/include/SDL_video.h Sat Jan 14 05:03:21 2012 +0100 @@ -0,0 +1,951 @@ +/* + SDL - Simple DirectMedia Layer + Copyright (C) 1997-2009 Sam Lantinga + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Sam Lantinga + slouken@libsdl.org +*/ + +/** @file SDL_video.h + * Header file for access to the SDL raw framebuffer window + */ + +#ifndef _SDL_video_h +#define _SDL_video_h + +#include "SDL_stdinc.h" +#include "SDL_error.h" +#include "SDL_rwops.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** @name Transparency definitions + * These define alpha as the opacity of a surface + */ +/*@{*/ +#define SDL_ALPHA_OPAQUE 255 +#define SDL_ALPHA_TRANSPARENT 0 +/*@}*/ + +/** @name Useful data types */ +/*@{*/ +typedef struct SDL_Rect { + Sint16 x, y; + Uint16 w, h; +} SDL_Rect; + +typedef struct SDL_Color { + Uint8 r; + Uint8 g; + Uint8 b; + Uint8 unused; +} SDL_Color; +#define SDL_Colour SDL_Color + +typedef struct SDL_Palette { + int ncolors; + SDL_Color *colors; +} SDL_Palette; +/*@}*/ + +/** Everything in the pixel format structure is read-only */ +typedef struct SDL_PixelFormat { + SDL_Palette *palette; + Uint8 BitsPerPixel; + Uint8 BytesPerPixel; + Uint8 Rloss; + Uint8 Gloss; + Uint8 Bloss; + Uint8 Aloss; + Uint8 Rshift; + Uint8 Gshift; + Uint8 Bshift; + Uint8 Ashift; + Uint32 Rmask; + Uint32 Gmask; + Uint32 Bmask; + Uint32 Amask; + + /** RGB color key information */ + Uint32 colorkey; + /** Alpha value information (per-surface alpha) */ + Uint8 alpha; +} SDL_PixelFormat; + +/** This structure should be treated as read-only, except for 'pixels', + * which, if not NULL, contains the raw pixel data for the surface. + */ +typedef struct SDL_Surface { + Uint32 flags; /**< Read-only */ + SDL_PixelFormat *format; /**< Read-only */ + int w, h; /**< Read-only */ + Uint16 pitch; /**< Read-only */ + void *pixels; /**< Read-write */ + int offset; /**< Private */ + + /** Hardware-specific surface info */ + struct private_hwdata *hwdata; + + /** clipping information */ + SDL_Rect clip_rect; /**< Read-only */ + Uint32 unused1; /**< for binary compatibility */ + + /** Allow recursive locks */ + Uint32 locked; /**< Private */ + + /** info for fast blit mapping to other surfaces */ + struct SDL_BlitMap *map; /**< Private */ + + /** format version, bumped at every change to invalidate blit maps */ + unsigned int format_version; /**< Private */ + + /** Reference count -- used when freeing surface */ + int refcount; /**< Read-mostly */ +} SDL_Surface; + +/** @name SDL_Surface Flags + * These are the currently supported flags for the SDL_surface + */ +/*@{*/ + +/** Available for SDL_CreateRGBSurface() or SDL_SetVideoMode() */ +/*@{*/ +#define SDL_SWSURFACE 0x00000000 /**< Surface is in system memory */ +#define SDL_HWSURFACE 0x00000001 /**< Surface is in video memory */ +#define SDL_ASYNCBLIT 0x00000004 /**< Use asynchronous blits if possible */ +/*@}*/ + +/** Available for SDL_SetVideoMode() */ +/*@{*/ +#define SDL_ANYFORMAT 0x10000000 /**< Allow any video depth/pixel-format */ +#define SDL_HWPALETTE 0x20000000 /**< Surface has exclusive palette */ +#define SDL_DOUBLEBUF 0x40000000 /**< Set up double-buffered video mode */ +#define SDL_FULLSCREEN 0x80000000 /**< Surface is a full screen display */ +#define SDL_OPENGL 0x00000002 /**< Create an OpenGL rendering context */ +#define SDL_OPENGLBLIT 0x0000000A /**< Create an OpenGL rendering context and use it for blitting */ +#define SDL_RESIZABLE 0x00000010 /**< This video mode may be resized */ +#define SDL_NOFRAME 0x00000020 /**< No window caption or edge frame */ +/*@}*/ + +/** Used internally (read-only) */ +/*@{*/ +#define SDL_HWACCEL 0x00000100 /**< Blit uses hardware acceleration */ +#define SDL_SRCCOLORKEY 0x00001000 /**< Blit uses a source color key */ +#define SDL_RLEACCELOK 0x00002000 /**< Private flag */ +#define SDL_RLEACCEL 0x00004000 /**< Surface is RLE encoded */ +#define SDL_SRCALPHA 0x00010000 /**< Blit uses source alpha blending */ +#define SDL_PREALLOC 0x01000000 /**< Surface uses preallocated memory */ +/*@}*/ + +/*@}*/ + +/** Evaluates to true if the surface needs to be locked before access */ +#define SDL_MUSTLOCK(surface) \ + (surface->offset || \ + ((surface->flags & (SDL_HWSURFACE|SDL_ASYNCBLIT|SDL_RLEACCEL)) != 0)) + +/** typedef for private surface blitting functions */ +typedef int (*SDL_blit)(struct SDL_Surface *src, SDL_Rect *srcrect, + struct SDL_Surface *dst, SDL_Rect *dstrect); + + +/** Useful for determining the video hardware capabilities */ +typedef struct SDL_VideoInfo { + Uint32 hw_available :1; /**< Flag: Can you create hardware surfaces? */ + Uint32 wm_available :1; /**< Flag: Can you talk to a window manager? */ + Uint32 UnusedBits1 :6; + Uint32 UnusedBits2 :1; + Uint32 blit_hw :1; /**< Flag: Accelerated blits HW --> HW */ + Uint32 blit_hw_CC :1; /**< Flag: Accelerated blits with Colorkey */ + Uint32 blit_hw_A :1; /**< Flag: Accelerated blits with Alpha */ + Uint32 blit_sw :1; /**< Flag: Accelerated blits SW --> HW */ + Uint32 blit_sw_CC :1; /**< Flag: Accelerated blits with Colorkey */ + Uint32 blit_sw_A :1; /**< Flag: Accelerated blits with Alpha */ + Uint32 blit_fill :1; /**< Flag: Accelerated color fill */ + Uint32 UnusedBits3 :16; + Uint32 video_mem; /**< The total amount of video memory (in K) */ + SDL_PixelFormat *vfmt; /**< Value: The format of the video surface */ + int current_w; /**< Value: The current video mode width */ + int current_h; /**< Value: The current video mode height */ +} SDL_VideoInfo; + + +/** @name Overlay Formats + * The most common video overlay formats. + * For an explanation of these pixel formats, see: + * http://www.webartz.com/fourcc/indexyuv.htm + * + * For information on the relationship between color spaces, see: + * http://www.neuro.sfc.keio.ac.jp/~aly/polygon/info/color-space-faq.html + */ +/*@{*/ +#define SDL_YV12_OVERLAY 0x32315659 /**< Planar mode: Y + V + U (3 planes) */ +#define SDL_IYUV_OVERLAY 0x56555949 /**< Planar mode: Y + U + V (3 planes) */ +#define SDL_YUY2_OVERLAY 0x32595559 /**< Packed mode: Y0+U0+Y1+V0 (1 plane) */ +#define SDL_UYVY_OVERLAY 0x59565955 /**< Packed mode: U0+Y0+V0+Y1 (1 plane) */ +#define SDL_YVYU_OVERLAY 0x55595659 /**< Packed mode: Y0+V0+Y1+U0 (1 plane) */ +/*@}*/ + +/** The YUV hardware video overlay */ +typedef struct SDL_Overlay { + Uint32 format; /**< Read-only */ + int w, h; /**< Read-only */ + int planes; /**< Read-only */ + Uint16 *pitches; /**< Read-only */ + Uint8 **pixels; /**< Read-write */ + + /** @name Hardware-specific surface info */ + /*@{*/ + struct private_yuvhwfuncs *hwfuncs; + struct private_yuvhwdata *hwdata; + /*@{*/ + + /** @name Special flags */ + /*@{*/ + Uint32 hw_overlay :1; /**< Flag: This overlay hardware accelerated? */ + Uint32 UnusedBits :31; + /*@}*/ +} SDL_Overlay; + + +/** Public enumeration for setting the OpenGL window attributes. */ +typedef enum { + SDL_GL_RED_SIZE, + SDL_GL_GREEN_SIZE, + SDL_GL_BLUE_SIZE, + SDL_GL_ALPHA_SIZE, + SDL_GL_BUFFER_SIZE, + SDL_GL_DOUBLEBUFFER, + SDL_GL_DEPTH_SIZE, + SDL_GL_STENCIL_SIZE, + SDL_GL_ACCUM_RED_SIZE, + SDL_GL_ACCUM_GREEN_SIZE, + SDL_GL_ACCUM_BLUE_SIZE, + SDL_GL_ACCUM_ALPHA_SIZE, + SDL_GL_STEREO, + SDL_GL_MULTISAMPLEBUFFERS, + SDL_GL_MULTISAMPLESAMPLES, + SDL_GL_ACCELERATED_VISUAL, + SDL_GL_SWAP_CONTROL +} SDL_GLattr; + +/** @name flags for SDL_SetPalette() */ +/*@{*/ +#define SDL_LOGPAL 0x01 +#define SDL_PHYSPAL 0x02 +/*@}*/ + +/* Function prototypes */ + +/** + * @name Video Init and Quit + * These functions are used internally, and should not be used unless you + * have a specific need to specify the video driver you want to use. + * You should normally use SDL_Init() or SDL_InitSubSystem(). + */ +/*@{*/ +/** + * Initializes the video subsystem. Sets up a connection + * to the window manager, etc, and determines the current video mode and + * pixel format, but does not initialize a window or graphics mode. + * Note that event handling is activated by this routine. + * + * If you use both sound and video in your application, you need to call + * SDL_Init() before opening the sound device, otherwise under Win32 DirectX, + * you won't be able to set full-screen display modes. + */ +extern DECLSPEC int SDLCALL SDL_VideoInit(const char *driver_name, Uint32 flags); +extern DECLSPEC void SDLCALL SDL_VideoQuit(void); +/*@}*/ + +/** + * This function fills the given character buffer with the name of the + * video driver, and returns a pointer to it if the video driver has + * been initialized. It returns NULL if no driver has been initialized. + */ +extern DECLSPEC char * SDLCALL SDL_VideoDriverName(char *namebuf, int maxlen); + +/** + * This function returns a pointer to the current display surface. + * If SDL is doing format conversion on the display surface, this + * function returns the publicly visible surface, not the real video + * surface. + */ +extern DECLSPEC SDL_Surface * SDLCALL SDL_GetVideoSurface(void); + +/** + * This function returns a read-only pointer to information about the + * video hardware. If this is called before SDL_SetVideoMode(), the 'vfmt' + * member of the returned structure will contain the pixel format of the + * "best" video mode. + */ +extern DECLSPEC const SDL_VideoInfo * SDLCALL SDL_GetVideoInfo(void); + +/** + * Check to see if a particular video mode is supported. + * It returns 0 if the requested mode is not supported under any bit depth, + * or returns the bits-per-pixel of the closest available mode with the + * given width and height. If this bits-per-pixel is different from the + * one used when setting the video mode, SDL_SetVideoMode() will succeed, + * but will emulate the requested bits-per-pixel with a shadow surface. + * + * The arguments to SDL_VideoModeOK() are the same ones you would pass to + * SDL_SetVideoMode() + */ +extern DECLSPEC int SDLCALL SDL_VideoModeOK(int width, int height, int bpp, Uint32 flags); + +/** + * Return a pointer to an array of available screen dimensions for the + * given format and video flags, sorted largest to smallest. Returns + * NULL if there are no dimensions available for a particular format, + * or (SDL_Rect **)-1 if any dimension is okay for the given format. + * + * If 'format' is NULL, the mode list will be for the format given + * by SDL_GetVideoInfo()->vfmt + */ +extern DECLSPEC SDL_Rect ** SDLCALL SDL_ListModes(SDL_PixelFormat *format, Uint32 flags); + +/** + * Set up a video mode with the specified width, height and bits-per-pixel. + * + * If 'bpp' is 0, it is treated as the current display bits per pixel. + * + * If SDL_ANYFORMAT is set in 'flags', the SDL library will try to set the + * requested bits-per-pixel, but will return whatever video pixel format is + * available. The default is to emulate the requested pixel format if it + * is not natively available. + * + * If SDL_HWSURFACE is set in 'flags', the video surface will be placed in + * video memory, if possible, and you may have to call SDL_LockSurface() + * in order to access the raw framebuffer. Otherwise, the video surface + * will be created in system memory. + * + * If SDL_ASYNCBLIT is set in 'flags', SDL will try to perform rectangle + * updates asynchronously, but you must always lock before accessing pixels. + * SDL will wait for updates to complete before returning from the lock. + * + * If SDL_HWPALETTE is set in 'flags', the SDL library will guarantee + * that the colors set by SDL_SetColors() will be the colors you get. + * Otherwise, in 8-bit mode, SDL_SetColors() may not be able to set all + * of the colors exactly the way they are requested, and you should look + * at the video surface structure to determine the actual palette. + * If SDL cannot guarantee that the colors you request can be set, + * i.e. if the colormap is shared, then the video surface may be created + * under emulation in system memory, overriding the SDL_HWSURFACE flag. + * + * If SDL_FULLSCREEN is set in 'flags', the SDL library will try to set + * a fullscreen video mode. The default is to create a windowed mode + * if the current graphics system has a window manager. + * If the SDL library is able to set a fullscreen video mode, this flag + * will be set in the surface that is returned. + * + * If SDL_DOUBLEBUF is set in 'flags', the SDL library will try to set up + * two surfaces in video memory and swap between them when you call + * SDL_Flip(). This is usually slower than the normal single-buffering + * scheme, but prevents "tearing" artifacts caused by modifying video + * memory while the monitor is refreshing. It should only be used by + * applications that redraw the entire screen on every update. + * + * If SDL_RESIZABLE is set in 'flags', the SDL library will allow the + * window manager, if any, to resize the window at runtime. When this + * occurs, SDL will send a SDL_VIDEORESIZE event to you application, + * and you must respond to the event by re-calling SDL_SetVideoMode() + * with the requested size (or another size that suits the application). + * + * If SDL_NOFRAME is set in 'flags', the SDL library will create a window + * without any title bar or frame decoration. Fullscreen video modes have + * this flag set automatically. + * + * This function returns the video framebuffer surface, or NULL if it fails. + * + * If you rely on functionality provided by certain video flags, check the + * flags of the returned surface to make sure that functionality is available. + * SDL will fall back to reduced functionality if the exact flags you wanted + * are not available. + */ +extern DECLSPEC SDL_Surface * SDLCALL SDL_SetVideoMode + (int width, int height, int bpp, Uint32 flags); + +/** @name SDL_Update Functions + * These functions should not be called while 'screen' is locked. + */ +/*@{*/ +/** + * Makes sure the given list of rectangles is updated on the given screen. + */ +extern DECLSPEC void SDLCALL SDL_UpdateRects + (SDL_Surface *screen, int numrects, SDL_Rect *rects); +/** + * If 'x', 'y', 'w' and 'h' are all 0, SDL_UpdateRect will update the entire + * screen. + */ +extern DECLSPEC void SDLCALL SDL_UpdateRect + (SDL_Surface *screen, Sint32 x, Sint32 y, Uint32 w, Uint32 h); +/*@}*/ + +/** + * On hardware that supports double-buffering, this function sets up a flip + * and returns. The hardware will wait for vertical retrace, and then swap + * video buffers before the next video surface blit or lock will return. + * On hardware that doesn not support double-buffering, this is equivalent + * to calling SDL_UpdateRect(screen, 0, 0, 0, 0); + * The SDL_DOUBLEBUF flag must have been passed to SDL_SetVideoMode() when + * setting the video mode for this function to perform hardware flipping. + * This function returns 0 if successful, or -1 if there was an error. + */ +extern DECLSPEC int SDLCALL SDL_Flip(SDL_Surface *screen); + +/** + * Set the gamma correction for each of the color channels. + * The gamma values range (approximately) between 0.1 and 10.0 + * + * If this function isn't supported directly by the hardware, it will + * be emulated using gamma ramps, if available. If successful, this + * function returns 0, otherwise it returns -1. + */ +extern DECLSPEC int SDLCALL SDL_SetGamma(float red, float green, float blue); + +/** + * Set the gamma translation table for the red, green, and blue channels + * of the video hardware. Each table is an array of 256 16-bit quantities, + * representing a mapping between the input and output for that channel. + * The input is the index into the array, and the output is the 16-bit + * gamma value at that index, scaled to the output color precision. + * + * You may pass NULL for any of the channels to leave it unchanged. + * If the call succeeds, it will return 0. If the display driver or + * hardware does not support gamma translation, or otherwise fails, + * this function will return -1. + */ +extern DECLSPEC int SDLCALL SDL_SetGammaRamp(const Uint16 *red, const Uint16 *green, const Uint16 *blue); + +/** + * Retrieve the current values of the gamma translation tables. + * + * You must pass in valid pointers to arrays of 256 16-bit quantities. + * Any of the pointers may be NULL to ignore that channel. + * If the call succeeds, it will return 0. If the display driver or + * hardware does not support gamma translation, or otherwise fails, + * this function will return -1. + */ +extern DECLSPEC int SDLCALL SDL_GetGammaRamp(Uint16 *red, Uint16 *green, Uint16 *blue); + +/** + * Sets a portion of the colormap for the given 8-bit surface. If 'surface' + * is not a palettized surface, this function does nothing, returning 0. + * If all of the colors were set as passed to SDL_SetColors(), it will + * return 1. If not all the color entries were set exactly as given, + * it will return 0, and you should look at the surface palette to + * determine the actual color palette. + * + * When 'surface' is the surface associated with the current display, the + * display colormap will be updated with the requested colors. If + * SDL_HWPALETTE was set in SDL_SetVideoMode() flags, SDL_SetColors() + * will always return 1, and the palette is guaranteed to be set the way + * you desire, even if the window colormap has to be warped or run under + * emulation. + */ +extern DECLSPEC int SDLCALL SDL_SetColors(SDL_Surface *surface, + SDL_Color *colors, int firstcolor, int ncolors); + +/** + * Sets a portion of the colormap for a given 8-bit surface. + * 'flags' is one or both of: + * SDL_LOGPAL -- set logical palette, which controls how blits are mapped + * to/from the surface, + * SDL_PHYSPAL -- set physical palette, which controls how pixels look on + * the screen + * Only screens have physical palettes. Separate change of physical/logical + * palettes is only possible if the screen has SDL_HWPALETTE set. + * + * The return value is 1 if all colours could be set as requested, and 0 + * otherwise. + * + * SDL_SetColors() is equivalent to calling this function with + * flags = (SDL_LOGPAL|SDL_PHYSPAL). + */ +extern DECLSPEC int SDLCALL SDL_SetPalette(SDL_Surface *surface, int flags, + SDL_Color *colors, int firstcolor, + int ncolors); + +/** + * Maps an RGB triple to an opaque pixel value for a given pixel format + */ +extern DECLSPEC Uint32 SDLCALL SDL_MapRGB +(const SDL_PixelFormat * const format, + const Uint8 r, const Uint8 g, const Uint8 b); + +/** + * Maps an RGBA quadruple to a pixel value for a given pixel format + */ +extern DECLSPEC Uint32 SDLCALL SDL_MapRGBA +(const SDL_PixelFormat * const format, + const Uint8 r, const Uint8 g, const Uint8 b, const Uint8 a); + +/** + * Maps a pixel value into the RGB components for a given pixel format + */ +extern DECLSPEC void SDLCALL SDL_GetRGB(Uint32 pixel, + const SDL_PixelFormat * const fmt, + Uint8 *r, Uint8 *g, Uint8 *b); + +/** + * Maps a pixel value into the RGBA components for a given pixel format + */ +extern DECLSPEC void SDLCALL SDL_GetRGBA(Uint32 pixel, + const SDL_PixelFormat * const fmt, + Uint8 *r, Uint8 *g, Uint8 *b, Uint8 *a); + +/** @sa SDL_CreateRGBSurface */ +#define SDL_AllocSurface SDL_CreateRGBSurface +/** + * Allocate and free an RGB surface (must be called after SDL_SetVideoMode) + * If the depth is 4 or 8 bits, an empty palette is allocated for the surface. + * If the depth is greater than 8 bits, the pixel format is set using the + * flags '[RGB]mask'. + * If the function runs out of memory, it will return NULL. + * + * The 'flags' tell what kind of surface to create. + * SDL_SWSURFACE means that the surface should be created in system memory. + * SDL_HWSURFACE means that the surface should be created in video memory, + * with the same format as the display surface. This is useful for surfaces + * that will not change much, to take advantage of hardware acceleration + * when being blitted to the display surface. + * SDL_ASYNCBLIT means that SDL will try to perform asynchronous blits with + * this surface, but you must always lock it before accessing the pixels. + * SDL will wait for current blits to finish before returning from the lock. + * SDL_SRCCOLORKEY indicates that the surface will be used for colorkey blits. + * If the hardware supports acceleration of colorkey blits between + * two surfaces in video memory, SDL will try to place the surface in + * video memory. If this isn't possible or if there is no hardware + * acceleration available, the surface will be placed in system memory. + * SDL_SRCALPHA means that the surface will be used for alpha blits and + * if the hardware supports hardware acceleration of alpha blits between + * two surfaces in video memory, to place the surface in video memory + * if possible, otherwise it will be placed in system memory. + * If the surface is created in video memory, blits will be _much_ faster, + * but the surface format must be identical to the video surface format, + * and the only way to access the pixels member of the surface is to use + * the SDL_LockSurface() and SDL_UnlockSurface() calls. + * If the requested surface actually resides in video memory, SDL_HWSURFACE + * will be set in the flags member of the returned surface. If for some + * reason the surface could not be placed in video memory, it will not have + * the SDL_HWSURFACE flag set, and will be created in system memory instead. + */ +extern DECLSPEC SDL_Surface * SDLCALL SDL_CreateRGBSurface + (Uint32 flags, int width, int height, int depth, + Uint32 Rmask, Uint32 Gmask, Uint32 Bmask, Uint32 Amask); +/** @sa SDL_CreateRGBSurface */ +extern DECLSPEC SDL_Surface * SDLCALL SDL_CreateRGBSurfaceFrom(void *pixels, + int width, int height, int depth, int pitch, + Uint32 Rmask, Uint32 Gmask, Uint32 Bmask, Uint32 Amask); +extern DECLSPEC void SDLCALL SDL_FreeSurface(SDL_Surface *surface); + +/** + * SDL_LockSurface() sets up a surface for directly accessing the pixels. + * Between calls to SDL_LockSurface()/SDL_UnlockSurface(), you can write + * to and read from 'surface->pixels', using the pixel format stored in + * 'surface->format'. Once you are done accessing the surface, you should + * use SDL_UnlockSurface() to release it. + * + * Not all surfaces require locking. If SDL_MUSTLOCK(surface) evaluates + * to 0, then you can read and write to the surface at any time, and the + * pixel format of the surface will not change. In particular, if the + * SDL_HWSURFACE flag is not given when calling SDL_SetVideoMode(), you + * will not need to lock the display surface before accessing it. + * + * No operating system or library calls should be made between lock/unlock + * pairs, as critical system locks may be held during this time. + * + * SDL_LockSurface() returns 0, or -1 if the surface couldn't be locked. + */ +extern DECLSPEC int SDLCALL SDL_LockSurface(SDL_Surface *surface); +extern DECLSPEC void SDLCALL SDL_UnlockSurface(SDL_Surface *surface); + +/** + * Load a surface from a seekable SDL data source (memory or file.) + * If 'freesrc' is non-zero, the source will be closed after being read. + * Returns the new surface, or NULL if there was an error. + * The new surface should be freed with SDL_FreeSurface(). + */ +extern DECLSPEC SDL_Surface * SDLCALL SDL_LoadBMP_RW(SDL_RWops *src, int freesrc); + +/** Convenience macro -- load a surface from a file */ +#define SDL_LoadBMP(file) SDL_LoadBMP_RW(SDL_RWFromFile(file, "rb"), 1) + +/** + * Save a surface to a seekable SDL data source (memory or file.) + * If 'freedst' is non-zero, the source will be closed after being written. + * Returns 0 if successful or -1 if there was an error. + */ +extern DECLSPEC int SDLCALL SDL_SaveBMP_RW + (SDL_Surface *surface, SDL_RWops *dst, int freedst); + +/** Convenience macro -- save a surface to a file */ +#define SDL_SaveBMP(surface, file) \ + SDL_SaveBMP_RW(surface, SDL_RWFromFile(file, "wb"), 1) + +/** + * Sets the color key (transparent pixel) in a blittable surface. + * If 'flag' is SDL_SRCCOLORKEY (optionally OR'd with SDL_RLEACCEL), + * 'key' will be the transparent pixel in the source image of a blit. + * SDL_RLEACCEL requests RLE acceleration for the surface if present, + * and removes RLE acceleration if absent. + * If 'flag' is 0, this function clears any current color key. + * This function returns 0, or -1 if there was an error. + */ +extern DECLSPEC int SDLCALL SDL_SetColorKey + (SDL_Surface *surface, Uint32 flag, Uint32 key); + +/** + * This function sets the alpha value for the entire surface, as opposed to + * using the alpha component of each pixel. This value measures the range + * of transparency of the surface, 0 being completely transparent to 255 + * being completely opaque. An 'alpha' value of 255 causes blits to be + * opaque, the source pixels copied to the destination (the default). Note + * that per-surface alpha can be combined with colorkey transparency. + * + * If 'flag' is 0, alpha blending is disabled for the surface. + * If 'flag' is SDL_SRCALPHA, alpha blending is enabled for the surface. + * OR:ing the flag with SDL_RLEACCEL requests RLE acceleration for the + * surface; if SDL_RLEACCEL is not specified, the RLE accel will be removed. + * + * The 'alpha' parameter is ignored for surfaces that have an alpha channel. + */ +extern DECLSPEC int SDLCALL SDL_SetAlpha(SDL_Surface *surface, Uint32 flag, Uint8 alpha); + +/** + * Sets the clipping rectangle for the destination surface in a blit. + * + * If the clip rectangle is NULL, clipping will be disabled. + * If the clip rectangle doesn't intersect the surface, the function will + * return SDL_FALSE and blits will be completely clipped. Otherwise the + * function returns SDL_TRUE and blits to the surface will be clipped to + * the intersection of the surface area and the clipping rectangle. + * + * Note that blits are automatically clipped to the edges of the source + * and destination surfaces. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_SetClipRect(SDL_Surface *surface, const SDL_Rect *rect); + +/** + * Gets the clipping rectangle for the destination surface in a blit. + * 'rect' must be a pointer to a valid rectangle which will be filled + * with the correct values. + */ +extern DECLSPEC void SDLCALL SDL_GetClipRect(SDL_Surface *surface, SDL_Rect *rect); + +/** + * Creates a new surface of the specified format, and then copies and maps + * the given surface to it so the blit of the converted surface will be as + * fast as possible. If this function fails, it returns NULL. + * + * The 'flags' parameter is passed to SDL_CreateRGBSurface() and has those + * semantics. You can also pass SDL_RLEACCEL in the flags parameter and + * SDL will try to RLE accelerate colorkey and alpha blits in the resulting + * surface. + * + * This function is used internally by SDL_DisplayFormat(). + */ +extern DECLSPEC SDL_Surface * SDLCALL SDL_ConvertSurface + (SDL_Surface *src, SDL_PixelFormat *fmt, Uint32 flags); + +/** + * This performs a fast blit from the source surface to the destination + * surface. It assumes that the source and destination rectangles are + * the same size. If either 'srcrect' or 'dstrect' are NULL, the entire + * surface (src or dst) is copied. The final blit rectangles are saved + * in 'srcrect' and 'dstrect' after all clipping is performed. + * If the blit is successful, it returns 0, otherwise it returns -1. + * + * The blit function should not be called on a locked surface. + * + * The blit semantics for surfaces with and without alpha and colorkey + * are defined as follows: + * + * RGBA->RGB: + * SDL_SRCALPHA set: + * alpha-blend (using alpha-channel). + * SDL_SRCCOLORKEY ignored. + * SDL_SRCALPHA not set: + * copy RGB. + * if SDL_SRCCOLORKEY set, only copy the pixels matching the + * RGB values of the source colour key, ignoring alpha in the + * comparison. + * + * RGB->RGBA: + * SDL_SRCALPHA set: + * alpha-blend (using the source per-surface alpha value); + * set destination alpha to opaque. + * SDL_SRCALPHA not set: + * copy RGB, set destination alpha to source per-surface alpha value. + * both: + * if SDL_SRCCOLORKEY set, only copy the pixels matching the + * source colour key. + * + * RGBA->RGBA: + * SDL_SRCALPHA set: + * alpha-blend (using the source alpha channel) the RGB values; + * leave destination alpha untouched. [Note: is this correct?] + * SDL_SRCCOLORKEY ignored. + * SDL_SRCALPHA not set: + * copy all of RGBA to the destination. + * if SDL_SRCCOLORKEY set, only copy the pixels matching the + * RGB values of the source colour key, ignoring alpha in the + * comparison. + * + * RGB->RGB: + * SDL_SRCALPHA set: + * alpha-blend (using the source per-surface alpha value). + * SDL_SRCALPHA not set: + * copy RGB. + * both: + * if SDL_SRCCOLORKEY set, only copy the pixels matching the + * source colour key. + * + * If either of the surfaces were in video memory, and the blit returns -2, + * the video memory was lost, so it should be reloaded with artwork and + * re-blitted: + * @code + * while ( SDL_BlitSurface(image, imgrect, screen, dstrect) == -2 ) { + * while ( SDL_LockSurface(image) < 0 ) + * Sleep(10); + * -- Write image pixels to image->pixels -- + * SDL_UnlockSurface(image); + * } + * @endcode + * + * This happens under DirectX 5.0 when the system switches away from your + * fullscreen application. The lock will also fail until you have access + * to the video memory again. + * + * You should call SDL_BlitSurface() unless you know exactly how SDL + * blitting works internally and how to use the other blit functions. + */ +#define SDL_BlitSurface SDL_UpperBlit + +/** This is the public blit function, SDL_BlitSurface(), and it performs + * rectangle validation and clipping before passing it to SDL_LowerBlit() + */ +extern DECLSPEC int SDLCALL SDL_UpperBlit + (SDL_Surface *src, SDL_Rect *srcrect, + SDL_Surface *dst, SDL_Rect *dstrect); +/** This is a semi-private blit function and it performs low-level surface + * blitting only. + */ +extern DECLSPEC int SDLCALL SDL_LowerBlit + (SDL_Surface *src, SDL_Rect *srcrect, + SDL_Surface *dst, SDL_Rect *dstrect); + +/** + * This function performs a fast fill of the given rectangle with 'color' + * The given rectangle is clipped to the destination surface clip area + * and the final fill rectangle is saved in the passed in pointer. + * If 'dstrect' is NULL, the whole surface will be filled with 'color' + * The color should be a pixel of the format used by the surface, and + * can be generated by the SDL_MapRGB() function. + * This function returns 0 on success, or -1 on error. + */ +extern DECLSPEC int SDLCALL SDL_FillRect + (SDL_Surface *dst, SDL_Rect *dstrect, Uint32 color); + +/** + * This function takes a surface and copies it to a new surface of the + * pixel format and colors of the video framebuffer, suitable for fast + * blitting onto the display surface. It calls SDL_ConvertSurface() + * + * If you want to take advantage of hardware colorkey or alpha blit + * acceleration, you should set the colorkey and alpha value before + * calling this function. + * + * If the conversion fails or runs out of memory, it returns NULL + */ +extern DECLSPEC SDL_Surface * SDLCALL SDL_DisplayFormat(SDL_Surface *surface); + +/** + * This function takes a surface and copies it to a new surface of the + * pixel format and colors of the video framebuffer (if possible), + * suitable for fast alpha blitting onto the display surface. + * The new surface will always have an alpha channel. + * + * If you want to take advantage of hardware colorkey or alpha blit + * acceleration, you should set the colorkey and alpha value before + * calling this function. + * + * If the conversion fails or runs out of memory, it returns NULL + */ +extern DECLSPEC SDL_Surface * SDLCALL SDL_DisplayFormatAlpha(SDL_Surface *surface); + + +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ +/** @name YUV video surface overlay functions */ /*@{*/ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/** This function creates a video output overlay + * Calling the returned surface an overlay is something of a misnomer because + * the contents of the display surface underneath the area where the overlay + * is shown is undefined - it may be overwritten with the converted YUV data. + */ +extern DECLSPEC SDL_Overlay * SDLCALL SDL_CreateYUVOverlay(int width, int height, + Uint32 format, SDL_Surface *display); + +/** Lock an overlay for direct access, and unlock it when you are done */ +extern DECLSPEC int SDLCALL SDL_LockYUVOverlay(SDL_Overlay *overlay); +extern DECLSPEC void SDLCALL SDL_UnlockYUVOverlay(SDL_Overlay *overlay); + +/** Blit a video overlay to the display surface. + * The contents of the video surface underneath the blit destination are + * not defined. + * The width and height of the destination rectangle may be different from + * that of the overlay, but currently only 2x scaling is supported. + */ +extern DECLSPEC int SDLCALL SDL_DisplayYUVOverlay(SDL_Overlay *overlay, SDL_Rect *dstrect); + +/** Free a video overlay */ +extern DECLSPEC void SDLCALL SDL_FreeYUVOverlay(SDL_Overlay *overlay); + +/*@}*/ + +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ +/** @name OpenGL support functions. */ /*@{*/ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/** + * Dynamically load an OpenGL library, or the default one if path is NULL + * + * If you do this, you need to retrieve all of the GL functions used in + * your program from the dynamic library using SDL_GL_GetProcAddress(). + */ +extern DECLSPEC int SDLCALL SDL_GL_LoadLibrary(const char *path); + +/** + * Get the address of a GL function + */ +extern DECLSPEC void * SDLCALL SDL_GL_GetProcAddress(const char* proc); + +/** + * Set an attribute of the OpenGL subsystem before intialization. + */ +extern DECLSPEC int SDLCALL SDL_GL_SetAttribute(SDL_GLattr attr, int value); + +/** + * Get an attribute of the OpenGL subsystem from the windowing + * interface, such as glX. This is of course different from getting + * the values from SDL's internal OpenGL subsystem, which only + * stores the values you request before initialization. + * + * Developers should track the values they pass into SDL_GL_SetAttribute + * themselves if they want to retrieve these values. + */ +extern DECLSPEC int SDLCALL SDL_GL_GetAttribute(SDL_GLattr attr, int* value); + +/** + * Swap the OpenGL buffers, if double-buffering is supported. + */ +extern DECLSPEC void SDLCALL SDL_GL_SwapBuffers(void); + +/** @name OpenGL Internal Functions + * Internal functions that should not be called unless you have read + * and understood the source code for these functions. + */ +/*@{*/ +extern DECLSPEC void SDLCALL SDL_GL_UpdateRects(int numrects, SDL_Rect* rects); +extern DECLSPEC void SDLCALL SDL_GL_Lock(void); +extern DECLSPEC void SDLCALL SDL_GL_Unlock(void); +/*@}*/ + +/*@}*/ + +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ +/** @name Window Manager Functions */ +/** These functions allow interaction with the window manager, if any. */ /*@{*/ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/** + * Sets the title and icon text of the display window (UTF-8 encoded) + */ +extern DECLSPEC void SDLCALL SDL_WM_SetCaption(const char *title, const char *icon); +/** + * Gets the title and icon text of the display window (UTF-8 encoded) + */ +extern DECLSPEC void SDLCALL SDL_WM_GetCaption(char **title, char **icon); + +/** + * Sets the icon for the display window. + * This function must be called before the first call to SDL_SetVideoMode(). + * It takes an icon surface, and a mask in MSB format. + * If 'mask' is NULL, the entire icon surface will be used as the icon. + */ +extern DECLSPEC void SDLCALL SDL_WM_SetIcon(SDL_Surface *icon, Uint8 *mask); + +/** + * This function iconifies the window, and returns 1 if it succeeded. + * If the function succeeds, it generates an SDL_APPACTIVE loss event. + * This function is a noop and returns 0 in non-windowed environments. + */ +extern DECLSPEC int SDLCALL SDL_WM_IconifyWindow(void); + +/** + * Toggle fullscreen mode without changing the contents of the screen. + * If the display surface does not require locking before accessing + * the pixel information, then the memory pointers will not change. + * + * If this function was able to toggle fullscreen mode (change from + * running in a window to fullscreen, or vice-versa), it will return 1. + * If it is not implemented, or fails, it returns 0. + * + * The next call to SDL_SetVideoMode() will set the mode fullscreen + * attribute based on the flags parameter - if SDL_FULLSCREEN is not + * set, then the display will be windowed by default where supported. + * + * This is currently only implemented in the X11 video driver. + */ +extern DECLSPEC int SDLCALL SDL_WM_ToggleFullScreen(SDL_Surface *surface); + +typedef enum { + SDL_GRAB_QUERY = -1, + SDL_GRAB_OFF = 0, + SDL_GRAB_ON = 1, + SDL_GRAB_FULLSCREEN /**< Used internally */ +} SDL_GrabMode; +/** + * This function allows you to set and query the input grab state of + * the application. It returns the new input grab state. + * + * Grabbing means that the mouse is confined to the application window, + * and nearly all keyboard input is passed directly to the application, + * and not interpreted by a window manager, if any. + */ +extern DECLSPEC SDL_GrabMode SDLCALL SDL_WM_GrabInput(SDL_GrabMode mode); + +/*@}*/ + +/** @internal Not in public API at the moment - do not use! */ +extern DECLSPEC int SDLCALL SDL_SoftStretch(SDL_Surface *src, SDL_Rect *srcrect, + SDL_Surface *dst, SDL_Rect *dstrect); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* _SDL_video_h */