# HG changeset patch # User koda # Date 1351081278 -3600 # Node ID 00696c1450daf45bd093783d234dc2a5972cc3f1 # Parent 49ab679cb38492b595495df9ce9d7e4340f6c2db enable png support under win32 diff -r 49ab679cb384 -r 00696c1450da hedgewars/CMakeLists.txt --- a/hedgewars/CMakeLists.txt Wed Oct 24 10:23:37 2012 +0100 +++ b/hedgewars/CMakeLists.txt Wed Oct 24 13:21:18 2012 +0100 @@ -179,9 +179,8 @@ if(NOT NOPNG) find_package(PNG) if(${PNG_FOUND}) - message(STATUS "Found libpng: ${PNG_LIBRARY}") set(pascal_flags "-dPNG_SCREENSHOTS" ${pascal_flags}) - if(APPLE) # need to explictly link with the static lib -- maybe windows too? + if(APPLE) # easier to explictly link with the static lib string(REGEX REPLACE "(.*)libpng.*" "\\1" PNG_LIBDIR "${PNG_LIBRARY}") set(pascal_flags "-k${PNG_LIBDIR}/libpng.a" ${pascal_flags}) endif() diff -r 49ab679cb384 -r 00696c1450da misc/winutils/include/png.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/misc/winutils/include/png.h Wed Oct 24 13:21:18 2012 +0100 @@ -0,0 +1,2674 @@ + +/* png.h - header file for PNG reference library + * + * libpng version 1.5.13 - September 27, 2012 + * Copyright (c) 1998-2012 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license (See LICENSE, below) + * + * Authors and maintainers: + * libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat + * libpng versions 0.89c, June 1996, through 0.96, May 1997: Andreas Dilger + * libpng versions 0.97, January 1998, through 1.5.13 - September 27, 2012: Glenn + * See also "Contributing Authors", below. + * + * Note about libpng version numbers: + * + * Due to various miscommunications, unforeseen code incompatibilities + * and occasional factors outside the authors' control, version numbering + * on the library has not always been consistent and straightforward. + * The following table summarizes matters since version 0.89c, which was + * the first widely used release: + * + * source png.h png.h shared-lib + * version string int version + * ------- ------ ----- ---------- + * 0.89c "1.0 beta 3" 0.89 89 1.0.89 + * 0.90 "1.0 beta 4" 0.90 90 0.90 [should have been 2.0.90] + * 0.95 "1.0 beta 5" 0.95 95 0.95 [should have been 2.0.95] + * 0.96 "1.0 beta 6" 0.96 96 0.96 [should have been 2.0.96] + * 0.97b "1.00.97 beta 7" 1.00.97 97 1.0.1 [should have been 2.0.97] + * 0.97c 0.97 97 2.0.97 + * 0.98 0.98 98 2.0.98 + * 0.99 0.99 98 2.0.99 + * 0.99a-m 0.99 99 2.0.99 + * 1.00 1.00 100 2.1.0 [100 should be 10000] + * 1.0.0 (from here on, the 100 2.1.0 [100 should be 10000] + * 1.0.1 png.h string is 10001 2.1.0 + * 1.0.1a-e identical to the 10002 from here on, the shared library + * 1.0.2 source version) 10002 is 2.V where V is the source code + * 1.0.2a-b 10003 version, except as noted. + * 1.0.3 10003 + * 1.0.3a-d 10004 + * 1.0.4 10004 + * 1.0.4a-f 10005 + * 1.0.5 (+ 2 patches) 10005 + * 1.0.5a-d 10006 + * 1.0.5e-r 10100 (not source compatible) + * 1.0.5s-v 10006 (not binary compatible) + * 1.0.6 (+ 3 patches) 10006 (still binary incompatible) + * 1.0.6d-f 10007 (still binary incompatible) + * 1.0.6g 10007 + * 1.0.6h 10007 10.6h (testing xy.z so-numbering) + * 1.0.6i 10007 10.6i + * 1.0.6j 10007 2.1.0.6j (incompatible with 1.0.0) + * 1.0.7beta11-14 DLLNUM 10007 2.1.0.7beta11-14 (binary compatible) + * 1.0.7beta15-18 1 10007 2.1.0.7beta15-18 (binary compatible) + * 1.0.7rc1-2 1 10007 2.1.0.7rc1-2 (binary compatible) + * 1.0.7 1 10007 (still compatible) + * 1.0.8beta1-4 1 10008 2.1.0.8beta1-4 + * 1.0.8rc1 1 10008 2.1.0.8rc1 + * 1.0.8 1 10008 2.1.0.8 + * 1.0.9beta1-6 1 10009 2.1.0.9beta1-6 + * 1.0.9rc1 1 10009 2.1.0.9rc1 + * 1.0.9beta7-10 1 10009 2.1.0.9beta7-10 + * 1.0.9rc2 1 10009 2.1.0.9rc2 + * 1.0.9 1 10009 2.1.0.9 + * 1.0.10beta1 1 10010 2.1.0.10beta1 + * 1.0.10rc1 1 10010 2.1.0.10rc1 + * 1.0.10 1 10010 2.1.0.10 + * 1.0.11beta1-3 1 10011 2.1.0.11beta1-3 + * 1.0.11rc1 1 10011 2.1.0.11rc1 + * 1.0.11 1 10011 2.1.0.11 + * 1.0.12beta1-2 2 10012 2.1.0.12beta1-2 + * 1.0.12rc1 2 10012 2.1.0.12rc1 + * 1.0.12 2 10012 2.1.0.12 + * 1.1.0a-f - 10100 2.1.1.0a-f (branch abandoned) + * 1.2.0beta1-2 2 10200 2.1.2.0beta1-2 + * 1.2.0beta3-5 3 10200 3.1.2.0beta3-5 + * 1.2.0rc1 3 10200 3.1.2.0rc1 + * 1.2.0 3 10200 3.1.2.0 + * 1.2.1beta1-4 3 10201 3.1.2.1beta1-4 + * 1.2.1rc1-2 3 10201 3.1.2.1rc1-2 + * 1.2.1 3 10201 3.1.2.1 + * 1.2.2beta1-6 12 10202 12.so.0.1.2.2beta1-6 + * 1.0.13beta1 10 10013 10.so.0.1.0.13beta1 + * 1.0.13rc1 10 10013 10.so.0.1.0.13rc1 + * 1.2.2rc1 12 10202 12.so.0.1.2.2rc1 + * 1.0.13 10 10013 10.so.0.1.0.13 + * 1.2.2 12 10202 12.so.0.1.2.2 + * 1.2.3rc1-6 12 10203 12.so.0.1.2.3rc1-6 + * 1.2.3 12 10203 12.so.0.1.2.3 + * 1.2.4beta1-3 13 10204 12.so.0.1.2.4beta1-3 + * 1.0.14rc1 13 10014 10.so.0.1.0.14rc1 + * 1.2.4rc1 13 10204 12.so.0.1.2.4rc1 + * 1.0.14 10 10014 10.so.0.1.0.14 + * 1.2.4 13 10204 12.so.0.1.2.4 + * 1.2.5beta1-2 13 10205 12.so.0.1.2.5beta1-2 + * 1.0.15rc1-3 10 10015 10.so.0.1.0.15rc1-3 + * 1.2.5rc1-3 13 10205 12.so.0.1.2.5rc1-3 + * 1.0.15 10 10015 10.so.0.1.0.15 + * 1.2.5 13 10205 12.so.0.1.2.5 + * 1.2.6beta1-4 13 10206 12.so.0.1.2.6beta1-4 + * 1.0.16 10 10016 10.so.0.1.0.16 + * 1.2.6 13 10206 12.so.0.1.2.6 + * 1.2.7beta1-2 13 10207 12.so.0.1.2.7beta1-2 + * 1.0.17rc1 10 10017 12.so.0.1.0.17rc1 + * 1.2.7rc1 13 10207 12.so.0.1.2.7rc1 + * 1.0.17 10 10017 12.so.0.1.0.17 + * 1.2.7 13 10207 12.so.0.1.2.7 + * 1.2.8beta1-5 13 10208 12.so.0.1.2.8beta1-5 + * 1.0.18rc1-5 10 10018 12.so.0.1.0.18rc1-5 + * 1.2.8rc1-5 13 10208 12.so.0.1.2.8rc1-5 + * 1.0.18 10 10018 12.so.0.1.0.18 + * 1.2.8 13 10208 12.so.0.1.2.8 + * 1.2.9beta1-3 13 10209 12.so.0.1.2.9beta1-3 + * 1.2.9beta4-11 13 10209 12.so.0.9[.0] + * 1.2.9rc1 13 10209 12.so.0.9[.0] + * 1.2.9 13 10209 12.so.0.9[.0] + * 1.2.10beta1-7 13 10210 12.so.0.10[.0] + * 1.2.10rc1-2 13 10210 12.so.0.10[.0] + * 1.2.10 13 10210 12.so.0.10[.0] + * 1.4.0beta1-5 14 10400 14.so.0.0[.0] + * 1.2.11beta1-4 13 10211 12.so.0.11[.0] + * 1.4.0beta7-8 14 10400 14.so.0.0[.0] + * 1.2.11 13 10211 12.so.0.11[.0] + * 1.2.12 13 10212 12.so.0.12[.0] + * 1.4.0beta9-14 14 10400 14.so.0.0[.0] + * 1.2.13 13 10213 12.so.0.13[.0] + * 1.4.0beta15-36 14 10400 14.so.0.0[.0] + * 1.4.0beta37-87 14 10400 14.so.14.0[.0] + * 1.4.0rc01 14 10400 14.so.14.0[.0] + * 1.4.0beta88-109 14 10400 14.so.14.0[.0] + * 1.4.0rc02-08 14 10400 14.so.14.0[.0] + * 1.4.0 14 10400 14.so.14.0[.0] + * 1.4.1beta01-03 14 10401 14.so.14.1[.0] + * 1.4.1rc01 14 10401 14.so.14.1[.0] + * 1.4.1beta04-12 14 10401 14.so.14.1[.0] + * 1.4.1 14 10401 14.so.14.1[.0] + * 1.4.2 14 10402 14.so.14.2[.0] + * 1.4.3 14 10403 14.so.14.3[.0] + * 1.4.4 14 10404 14.so.14.4[.0] + * 1.5.0beta01-58 15 10500 15.so.15.0[.0] + * 1.5.0rc01-07 15 10500 15.so.15.0[.0] + * 1.5.0 15 10500 15.so.15.0[.0] + * 1.5.1beta01-11 15 10501 15.so.15.1[.0] + * 1.5.1rc01-02 15 10501 15.so.15.1[.0] + * 1.5.1 15 10501 15.so.15.1[.0] + * 1.5.2beta01-03 15 10502 15.so.15.2[.0] + * 1.5.2rc01-03 15 10502 15.so.15.2[.0] + * 1.5.2 15 10502 15.so.15.2[.0] + * 1.5.3beta01-10 15 10503 15.so.15.3[.0] + * 1.5.3rc01-02 15 10503 15.so.15.3[.0] + * 1.5.3beta11 15 10503 15.so.15.3[.0] + * 1.5.3 [omitted] + * 1.5.4beta01-08 15 10504 15.so.15.4[.0] + * 1.5.4rc01 15 10504 15.so.15.4[.0] + * 1.5.4 15 10504 15.so.15.4[.0] + * 1.5.5beta01-08 15 10505 15.so.15.5[.0] + * 1.5.5rc01 15 10505 15.so.15.5[.0] + * 1.5.5 15 10505 15.so.15.5[.0] + * 1.5.6beta01-07 15 10506 15.so.15.6[.0] + * 1.5.6rc01-03 15 10506 15.so.15.6[.0] + * 1.5.6 15 10506 15.so.15.6[.0] + * 1.5.7beta01-05 15 10507 15.so.15.7[.0] + * 1.5.7rc01-03 15 10507 15.so.15.7[.0] + * 1.5.7 15 10507 15.so.15.7[.0] + * 1.5.8beta01 15 10508 15.so.15.8[.0] + * 1.5.8rc01 15 10508 15.so.15.8[.0] + * 1.5.8 15 10508 15.so.15.8[.0] + * 1.5.9beta01-02 15 10509 15.so.15.9[.0] + * 1.5.9rc01 15 10509 15.so.15.9[.0] + * 1.5.9 15 10509 15.so.15.9[.0] + * 1.5.10beta01-05 15 10510 15.so.15.10[.0] + * 1.5.10 15 10510 15.so.15.10[.0] + * 1.5.11beta01 15 10511 15.so.15.11[.0] + * 1.5.11rc01-05 15 10511 15.so.15.11[.0] + * 1.5.11 15 10511 15.so.15.11[.0] + * 1.5.12 15 10512 15.so.15.12[.0] + * 1.5.13beta01-02 15 10513 15.so.15.13[.0] + * 1.5.13rc01 15 10513 15.so.15.13[.0] + * 1.5.13 15 10513 15.so.15.13[.0] + * + * Henceforth the source version will match the shared-library major + * and minor numbers; the shared-library major version number will be + * used for changes in backward compatibility, as it is intended. The + * PNG_LIBPNG_VER macro, which is not used within libpng but is available + * for applications, is an unsigned integer of the form xyyzz corresponding + * to the source version x.y.z (leading zeros in y and z). Beta versions + * were given the previous public release number plus a letter, until + * version 1.0.6j; from then on they were given the upcoming public + * release number plus "betaNN" or "rcNN". + * + * Binary incompatibility exists only when applications make direct access + * to the info_ptr or png_ptr members through png.h, and the compiled + * application is loaded with a different version of the library. + * + * DLLNUM will change each time there are forward or backward changes + * in binary compatibility (e.g., when a new feature is added). + * + * See libpng-manual.txt or libpng.3 for more information. The PNG + * specification is available as a W3C Recommendation and as an ISO + * Specification, +# endif + + /* Need the time information for converting tIME chunks, it + * defines struct tm: + */ +# ifdef PNG_CONVERT_tIME_SUPPORTED + /* "time.h" functions are not supported on all operating systems */ +# include +# endif +# endif + +/* Machine specific configuration. */ +# include "pngconf.h" +#endif + +/* + * Added at libpng-1.2.8 + * + * Ref MSDN: Private as priority over Special + * VS_FF_PRIVATEBUILD File *was not* built using standard release + * procedures. If this value is given, the StringFileInfo block must + * contain a PrivateBuild string. + * + * VS_FF_SPECIALBUILD File *was* built by the original company using + * standard release procedures but is a variation of the standard + * file of the same version number. If this value is given, the + * StringFileInfo block must contain a SpecialBuild string. + */ + +#ifdef PNG_USER_PRIVATEBUILD /* From pnglibconf.h */ +# define PNG_LIBPNG_BUILD_TYPE \ + (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_PRIVATE) +#else +# ifdef PNG_LIBPNG_SPECIALBUILD +# define PNG_LIBPNG_BUILD_TYPE \ + (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_SPECIAL) +# else +# define PNG_LIBPNG_BUILD_TYPE (PNG_LIBPNG_BUILD_BASE_TYPE) +# endif +#endif + +#ifndef PNG_VERSION_INFO_ONLY + +/* Inhibit C++ name-mangling for libpng functions but not for system calls. */ +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Version information for C files, stored in png.c. This had better match + * the version above. + */ +#define png_libpng_ver png_get_header_ver(NULL) + +/* This file is arranged in several sections: + * + * 1. Any configuration options that can be specified by for the application + * code when it is built. (Build time configuration is in pnglibconf.h) + * 2. Type definitions (base types are defined in pngconf.h), structure + * definitions. + * 3. Exported library functions. + * + * The library source code has additional files (principally pngpriv.h) that + * allow configuration of the library. + */ +/* Section 1: run time configuration + * See pnglibconf.h for build time configuration + * + * Run time configuration allows the application to choose between + * implementations of certain arithmetic APIs. The default is set + * at build time and recorded in pnglibconf.h, but it is safe to + * override these (and only these) settings. Note that this won't + * change what the library does, only application code, and the + * settings can (and probably should) be made on a per-file basis + * by setting the #defines before including png.h + * + * Use macros to read integers from PNG data or use the exported + * functions? + * PNG_USE_READ_MACROS: use the macros (see below) Note that + * the macros evaluate their argument multiple times. + * PNG_NO_USE_READ_MACROS: call the relevant library function. + * + * Use the alternative algorithm for compositing alpha samples that + * does not use division? + * PNG_READ_COMPOSITE_NODIV_SUPPORTED: use the 'no division' + * algorithm. + * PNG_NO_READ_COMPOSITE_NODIV: use the 'division' algorithm. + * + * How to handle benign errors if PNG_ALLOW_BENIGN_ERRORS is + * false? + * PNG_ALLOW_BENIGN_ERRORS: map calls to the benign error + * APIs to png_warning. + * Otherwise the calls are mapped to png_error. + */ + +/* Section 2: type definitions, including structures and compile time + * constants. + * See pngconf.h for base types that vary by machine/system + */ + +/* This triggers a compiler error in png.c, if png.c and png.h + * do not agree upon the version number. + */ +typedef char* png_libpng_version_1_5_13; + +/* Three color definitions. The order of the red, green, and blue, (and the + * exact size) is not important, although the size of the fields need to + * be png_byte or png_uint_16 (as defined below). + */ +typedef struct png_color_struct +{ + png_byte red; + png_byte green; + png_byte blue; +} png_color; +typedef png_color FAR * png_colorp; +typedef PNG_CONST png_color FAR * png_const_colorp; +typedef png_color FAR * FAR * png_colorpp; + +typedef struct png_color_16_struct +{ + png_byte index; /* used for palette files */ + png_uint_16 red; /* for use in red green blue files */ + png_uint_16 green; + png_uint_16 blue; + png_uint_16 gray; /* for use in grayscale files */ +} png_color_16; +typedef png_color_16 FAR * png_color_16p; +typedef PNG_CONST png_color_16 FAR * png_const_color_16p; +typedef png_color_16 FAR * FAR * png_color_16pp; + +typedef struct png_color_8_struct +{ + png_byte red; /* for use in red green blue files */ + png_byte green; + png_byte blue; + png_byte gray; /* for use in grayscale files */ + png_byte alpha; /* for alpha channel files */ +} png_color_8; +typedef png_color_8 FAR * png_color_8p; +typedef PNG_CONST png_color_8 FAR * png_const_color_8p; +typedef png_color_8 FAR * FAR * png_color_8pp; + +/* + * The following two structures are used for the in-core representation + * of sPLT chunks. + */ +typedef struct png_sPLT_entry_struct +{ + png_uint_16 red; + png_uint_16 green; + png_uint_16 blue; + png_uint_16 alpha; + png_uint_16 frequency; +} png_sPLT_entry; +typedef png_sPLT_entry FAR * png_sPLT_entryp; +typedef PNG_CONST png_sPLT_entry FAR * png_const_sPLT_entryp; +typedef png_sPLT_entry FAR * FAR * png_sPLT_entrypp; + +/* When the depth of the sPLT palette is 8 bits, the color and alpha samples + * occupy the LSB of their respective members, and the MSB of each member + * is zero-filled. The frequency member always occupies the full 16 bits. + */ + +typedef struct png_sPLT_struct +{ + png_charp name; /* palette name */ + png_byte depth; /* depth of palette samples */ + png_sPLT_entryp entries; /* palette entries */ + png_int_32 nentries; /* number of palette entries */ +} png_sPLT_t; +typedef png_sPLT_t FAR * png_sPLT_tp; +typedef PNG_CONST png_sPLT_t FAR * png_const_sPLT_tp; +typedef png_sPLT_t FAR * FAR * png_sPLT_tpp; + +#ifdef PNG_TEXT_SUPPORTED +/* png_text holds the contents of a text/ztxt/itxt chunk in a PNG file, + * and whether that contents is compressed or not. The "key" field + * points to a regular zero-terminated C string. The "text" fields can be a + * regular C string, an empty string, or a NULL pointer. + * However, the structure returned by png_get_text() will always contain + * the "text" field as a regular zero-terminated C string (possibly + * empty), never a NULL pointer, so it can be safely used in printf() and + * other string-handling functions. Note that the "itxt_length", "lang", and + * "lang_key" members of the structure only exist when the library is built + * with iTXt chunk support. Prior to libpng-1.4.0 the library was built by + * default without iTXt support. Also note that when iTXt *is* supported, + * the "lang" and "lang_key" fields contain NULL pointers when the + * "compression" field contains * PNG_TEXT_COMPRESSION_NONE or + * PNG_TEXT_COMPRESSION_zTXt. Note that the "compression value" is not the + * same as what appears in the PNG tEXt/zTXt/iTXt chunk's "compression flag" + * which is always 0 or 1, or its "compression method" which is always 0. + */ +typedef struct png_text_struct +{ + int compression; /* compression value: + -1: tEXt, none + 0: zTXt, deflate + 1: iTXt, none + 2: iTXt, deflate */ + png_charp key; /* keyword, 1-79 character description of "text" */ + png_charp text; /* comment, may be an empty string (ie "") + or a NULL pointer */ + png_size_t text_length; /* length of the text string */ + png_size_t itxt_length; /* length of the itxt string */ + png_charp lang; /* language code, 0-79 characters + or a NULL pointer */ + png_charp lang_key; /* keyword translated UTF-8 string, 0 or more + chars or a NULL pointer */ +} png_text; +typedef png_text FAR * png_textp; +typedef PNG_CONST png_text FAR * png_const_textp; +typedef png_text FAR * FAR * png_textpp; +#endif + +/* Supported compression types for text in PNG files (tEXt, and zTXt). + * The values of the PNG_TEXT_COMPRESSION_ defines should NOT be changed. */ +#define PNG_TEXT_COMPRESSION_NONE_WR -3 +#define PNG_TEXT_COMPRESSION_zTXt_WR -2 +#define PNG_TEXT_COMPRESSION_NONE -1 +#define PNG_TEXT_COMPRESSION_zTXt 0 +#define PNG_ITXT_COMPRESSION_NONE 1 +#define PNG_ITXT_COMPRESSION_zTXt 2 +#define PNG_TEXT_COMPRESSION_LAST 3 /* Not a valid value */ + +/* png_time is a way to hold the time in an machine independent way. + * Two conversions are provided, both from time_t and struct tm. There + * is no portable way to convert to either of these structures, as far + * as I know. If you know of a portable way, send it to me. As a side + * note - PNG has always been Year 2000 compliant! + */ +typedef struct png_time_struct +{ + png_uint_16 year; /* full year, as in, 1995 */ + png_byte month; /* month of year, 1 - 12 */ + png_byte day; /* day of month, 1 - 31 */ + png_byte hour; /* hour of day, 0 - 23 */ + png_byte minute; /* minute of hour, 0 - 59 */ + png_byte second; /* second of minute, 0 - 60 (for leap seconds) */ +} png_time; +typedef png_time FAR * png_timep; +typedef PNG_CONST png_time FAR * png_const_timep; +typedef png_time FAR * FAR * png_timepp; + +#if defined(PNG_UNKNOWN_CHUNKS_SUPPORTED) || \ + defined(PNG_HANDLE_AS_UNKNOWN_SUPPORTED) +/* png_unknown_chunk is a structure to hold queued chunks for which there is + * no specific support. The idea is that we can use this to queue + * up private chunks for output even though the library doesn't actually + * know about their semantics. + */ +typedef struct png_unknown_chunk_t +{ + png_byte name[5]; + png_byte *data; + png_size_t size; + + /* libpng-using applications should NOT directly modify this byte. */ + png_byte location; /* mode of operation at read time */ +} + + +png_unknown_chunk; +typedef png_unknown_chunk FAR * png_unknown_chunkp; +typedef PNG_CONST png_unknown_chunk FAR * png_const_unknown_chunkp; +typedef png_unknown_chunk FAR * FAR * png_unknown_chunkpp; +#endif + +/* Values for the unknown chunk location byte */ + +#define PNG_HAVE_IHDR 0x01 +#define PNG_HAVE_PLTE 0x02 +#define PNG_AFTER_IDAT 0x08 + +/* The complete definition of png_info has, as of libpng-1.5.0, + * been moved into a separate header file that is not accessible to + * applications. Read libpng-manual.txt or libpng.3 for more info. + */ +typedef struct png_info_def png_info; +typedef png_info FAR * png_infop; +typedef PNG_CONST png_info FAR * png_const_infop; +typedef png_info FAR * FAR * png_infopp; + +/* Maximum positive integer used in PNG is (2^31)-1 */ +#define PNG_UINT_31_MAX ((png_uint_32)0x7fffffffL) +#define PNG_UINT_32_MAX ((png_uint_32)(-1)) +#define PNG_SIZE_MAX ((png_size_t)(-1)) + +/* These are constants for fixed point values encoded in the + * PNG specification manner (x100000) + */ +#define PNG_FP_1 100000 +#define PNG_FP_HALF 50000 +#define PNG_FP_MAX ((png_fixed_point)0x7fffffffL) +#define PNG_FP_MIN (-PNG_FP_MAX) + +/* These describe the color_type field in png_info. */ +/* color type masks */ +#define PNG_COLOR_MASK_PALETTE 1 +#define PNG_COLOR_MASK_COLOR 2 +#define PNG_COLOR_MASK_ALPHA 4 + +/* color types. Note that not all combinations are legal */ +#define PNG_COLOR_TYPE_GRAY 0 +#define PNG_COLOR_TYPE_PALETTE (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_PALETTE) +#define PNG_COLOR_TYPE_RGB (PNG_COLOR_MASK_COLOR) +#define PNG_COLOR_TYPE_RGB_ALPHA (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_ALPHA) +#define PNG_COLOR_TYPE_GRAY_ALPHA (PNG_COLOR_MASK_ALPHA) +/* aliases */ +#define PNG_COLOR_TYPE_RGBA PNG_COLOR_TYPE_RGB_ALPHA +#define PNG_COLOR_TYPE_GA PNG_COLOR_TYPE_GRAY_ALPHA + +/* This is for compression type. PNG 1.0-1.2 only define the single type. */ +#define PNG_COMPRESSION_TYPE_BASE 0 /* Deflate method 8, 32K window */ +#define PNG_COMPRESSION_TYPE_DEFAULT PNG_COMPRESSION_TYPE_BASE + +/* This is for filter type. PNG 1.0-1.2 only define the single type. */ +#define PNG_FILTER_TYPE_BASE 0 /* Single row per-byte filtering */ +#define PNG_INTRAPIXEL_DIFFERENCING 64 /* Used only in MNG datastreams */ +#define PNG_FILTER_TYPE_DEFAULT PNG_FILTER_TYPE_BASE + +/* These are for the interlacing type. These values should NOT be changed. */ +#define PNG_INTERLACE_NONE 0 /* Non-interlaced image */ +#define PNG_INTERLACE_ADAM7 1 /* Adam7 interlacing */ +#define PNG_INTERLACE_LAST 2 /* Not a valid value */ + +/* These are for the oFFs chunk. These values should NOT be changed. */ +#define PNG_OFFSET_PIXEL 0 /* Offset in pixels */ +#define PNG_OFFSET_MICROMETER 1 /* Offset in micrometers (1/10^6 meter) */ +#define PNG_OFFSET_LAST 2 /* Not a valid value */ + +/* These are for the pCAL chunk. These values should NOT be changed. */ +#define PNG_EQUATION_LINEAR 0 /* Linear transformation */ +#define PNG_EQUATION_BASE_E 1 /* Exponential base e transform */ +#define PNG_EQUATION_ARBITRARY 2 /* Arbitrary base exponential transform */ +#define PNG_EQUATION_HYPERBOLIC 3 /* Hyperbolic sine transformation */ +#define PNG_EQUATION_LAST 4 /* Not a valid value */ + +/* These are for the sCAL chunk. These values should NOT be changed. */ +#define PNG_SCALE_UNKNOWN 0 /* unknown unit (image scale) */ +#define PNG_SCALE_METER 1 /* meters per pixel */ +#define PNG_SCALE_RADIAN 2 /* radians per pixel */ +#define PNG_SCALE_LAST 3 /* Not a valid value */ + +/* These are for the pHYs chunk. These values should NOT be changed. */ +#define PNG_RESOLUTION_UNKNOWN 0 /* pixels/unknown unit (aspect ratio) */ +#define PNG_RESOLUTION_METER 1 /* pixels/meter */ +#define PNG_RESOLUTION_LAST 2 /* Not a valid value */ + +/* These are for the sRGB chunk. These values should NOT be changed. */ +#define PNG_sRGB_INTENT_PERCEPTUAL 0 +#define PNG_sRGB_INTENT_RELATIVE 1 +#define PNG_sRGB_INTENT_SATURATION 2 +#define PNG_sRGB_INTENT_ABSOLUTE 3 +#define PNG_sRGB_INTENT_LAST 4 /* Not a valid value */ + +/* This is for text chunks */ +#define PNG_KEYWORD_MAX_LENGTH 79 + +/* Maximum number of entries in PLTE/sPLT/tRNS arrays */ +#define PNG_MAX_PALETTE_LENGTH 256 + +/* These determine if an ancillary chunk's data has been successfully read + * from the PNG header, or if the application has filled in the corresponding + * data in the info_struct to be written into the output file. The values + * of the PNG_INFO_ defines should NOT be changed. + */ +#define PNG_INFO_gAMA 0x0001 +#define PNG_INFO_sBIT 0x0002 +#define PNG_INFO_cHRM 0x0004 +#define PNG_INFO_PLTE 0x0008 +#define PNG_INFO_tRNS 0x0010 +#define PNG_INFO_bKGD 0x0020 +#define PNG_INFO_hIST 0x0040 +#define PNG_INFO_pHYs 0x0080 +#define PNG_INFO_oFFs 0x0100 +#define PNG_INFO_tIME 0x0200 +#define PNG_INFO_pCAL 0x0400 +#define PNG_INFO_sRGB 0x0800 /* GR-P, 0.96a */ +#define PNG_INFO_iCCP 0x1000 /* ESR, 1.0.6 */ +#define PNG_INFO_sPLT 0x2000 /* ESR, 1.0.6 */ +#define PNG_INFO_sCAL 0x4000 /* ESR, 1.0.6 */ +#define PNG_INFO_IDAT 0x8000 /* ESR, 1.0.6 */ + +/* This is used for the transformation routines, as some of them + * change these values for the row. It also should enable using + * the routines for other purposes. + */ +typedef struct png_row_info_struct +{ + png_uint_32 width; /* width of row */ + png_size_t rowbytes; /* number of bytes in row */ + png_byte color_type; /* color type of row */ + png_byte bit_depth; /* bit depth of row */ + png_byte channels; /* number of channels (1, 2, 3, or 4) */ + png_byte pixel_depth; /* bits per pixel (depth * channels) */ +} png_row_info; + +typedef png_row_info FAR * png_row_infop; +typedef png_row_info FAR * FAR * png_row_infopp; + +/* The complete definition of png_struct has, as of libpng-1.5.0, + * been moved into a separate header file that is not accessible to + * applications. Read libpng-manual.txt or libpng.3 for more info. + */ +typedef struct png_struct_def png_struct; +typedef PNG_CONST png_struct FAR * png_const_structp; +typedef png_struct FAR * png_structp; + +/* These are the function types for the I/O functions and for the functions + * that allow the user to override the default I/O functions with his or her + * own. The png_error_ptr type should match that of user-supplied warning + * and error functions, while the png_rw_ptr type should match that of the + * user read/write data functions. Note that the 'write' function must not + * modify the buffer it is passed. The 'read' function, on the other hand, is + * expected to return the read data in the buffer. + */ +typedef PNG_CALLBACK(void, *png_error_ptr, (png_structp, png_const_charp)); +typedef PNG_CALLBACK(void, *png_rw_ptr, (png_structp, png_bytep, png_size_t)); +typedef PNG_CALLBACK(void, *png_flush_ptr, (png_structp)); +typedef PNG_CALLBACK(void, *png_read_status_ptr, (png_structp, png_uint_32, + int)); +typedef PNG_CALLBACK(void, *png_write_status_ptr, (png_structp, png_uint_32, + int)); + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +typedef PNG_CALLBACK(void, *png_progressive_info_ptr, (png_structp, png_infop)); +typedef PNG_CALLBACK(void, *png_progressive_end_ptr, (png_structp, png_infop)); + +/* The following callback receives png_uint_32 row_number, int pass for the + * png_bytep data of the row. When transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +typedef PNG_CALLBACK(void, *png_progressive_row_ptr, (png_structp, png_bytep, + png_uint_32, int)); +#endif + +#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ + defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) +typedef PNG_CALLBACK(void, *png_user_transform_ptr, (png_structp, png_row_infop, + png_bytep)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +typedef PNG_CALLBACK(int, *png_user_chunk_ptr, (png_structp, + png_unknown_chunkp)); +#endif +#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED +typedef PNG_CALLBACK(void, *png_unknown_chunk_ptr, (png_structp)); +#endif + +#ifdef PNG_SETJMP_SUPPORTED +/* This must match the function definition in , and the application + * must include this before png.h to obtain the definition of jmp_buf. The + * function is required to be PNG_NORETURN, but this is not checked. If the + * function does return the application will crash via an abort() or similar + * system level call. + * + * If you get a warning here while building the library you may need to make + * changes to ensure that pnglibconf.h records the calling convention used by + * your compiler. This may be very difficult - try using a different compiler + * to build the library! + */ +PNG_FUNCTION(void, (PNGCAPI *png_longjmp_ptr), PNGARG((jmp_buf, int)), typedef); +#endif + +/* Transform masks for the high-level interface */ +#define PNG_TRANSFORM_IDENTITY 0x0000 /* read and write */ +#define PNG_TRANSFORM_STRIP_16 0x0001 /* read only */ +#define PNG_TRANSFORM_STRIP_ALPHA 0x0002 /* read only */ +#define PNG_TRANSFORM_PACKING 0x0004 /* read and write */ +#define PNG_TRANSFORM_PACKSWAP 0x0008 /* read and write */ +#define PNG_TRANSFORM_EXPAND 0x0010 /* read only */ +#define PNG_TRANSFORM_INVERT_MONO 0x0020 /* read and write */ +#define PNG_TRANSFORM_SHIFT 0x0040 /* read and write */ +#define PNG_TRANSFORM_BGR 0x0080 /* read and write */ +#define PNG_TRANSFORM_SWAP_ALPHA 0x0100 /* read and write */ +#define PNG_TRANSFORM_SWAP_ENDIAN 0x0200 /* read and write */ +#define PNG_TRANSFORM_INVERT_ALPHA 0x0400 /* read and write */ +#define PNG_TRANSFORM_STRIP_FILLER 0x0800 /* write only */ +/* Added to libpng-1.2.34 */ +#define PNG_TRANSFORM_STRIP_FILLER_BEFORE PNG_TRANSFORM_STRIP_FILLER +#define PNG_TRANSFORM_STRIP_FILLER_AFTER 0x1000 /* write only */ +/* Added to libpng-1.4.0 */ +#define PNG_TRANSFORM_GRAY_TO_RGB 0x2000 /* read only */ +/* Added to libpng-1.5.4 */ +#define PNG_TRANSFORM_EXPAND_16 0x4000 /* read only */ +#define PNG_TRANSFORM_SCALE_16 0x8000 /* read only */ + +/* Flags for MNG supported features */ +#define PNG_FLAG_MNG_EMPTY_PLTE 0x01 +#define PNG_FLAG_MNG_FILTER_64 0x04 +#define PNG_ALL_MNG_FEATURES 0x05 + +/* NOTE: prior to 1.5 these functions had no 'API' style declaration, + * this allowed the zlib default functions to be used on Windows + * platforms. In 1.5 the zlib default malloc (which just calls malloc and + * ignores the first argument) should be completely compatible with the + * following. + */ +typedef PNG_CALLBACK(png_voidp, *png_malloc_ptr, (png_structp, + png_alloc_size_t)); +typedef PNG_CALLBACK(void, *png_free_ptr, (png_structp, png_voidp)); + +typedef png_struct FAR * FAR * png_structpp; + +/* Section 3: exported functions + * Here are the function definitions most commonly used. This is not + * the place to find out how to use libpng. See libpng-manual.txt for the + * full explanation, see example.c for the summary. This just provides + * a simple one line description of the use of each function. + * + * The PNG_EXPORT() and PNG_EXPORTA() macros used below are defined in + * pngconf.h and in the *.dfn files in the scripts directory. + * + * PNG_EXPORT(ordinal, type, name, (args)); + * + * ordinal: ordinal that is used while building + * *.def files. The ordinal value is only + * relevant when preprocessing png.h with + * the *.dfn files for building symbol table + * entries, and are removed by pngconf.h. + * type: return type of the function + * name: function name + * args: function arguments, with types + * + * When we wish to append attributes to a function prototype we use + * the PNG_EXPORTA() macro instead. + * + * PNG_EXPORTA(ordinal, type, name, (args), attributes); + * + * ordinal, type, name, and args: same as in PNG_EXPORT(). + * attributes: function attributes + */ + +/* Returns the version number of the library */ +PNG_EXPORT(1, png_uint_32, png_access_version_number, (void)); + +/* Tell lib we have already handled the first magic bytes. + * Handling more than 8 bytes from the beginning of the file is an error. + */ +PNG_EXPORT(2, void, png_set_sig_bytes, (png_structp png_ptr, int num_bytes)); + +/* Check sig[start] through sig[start + num_to_check - 1] to see if it's a + * PNG file. Returns zero if the supplied bytes match the 8-byte PNG + * signature, and non-zero otherwise. Having num_to_check == 0 or + * start > 7 will always fail (ie return non-zero). + */ +PNG_EXPORT(3, int, png_sig_cmp, (png_const_bytep sig, png_size_t start, + png_size_t num_to_check)); + +/* Simple signature checking function. This is the same as calling + * png_check_sig(sig, n) := !png_sig_cmp(sig, 0, n). + */ +#define png_check_sig(sig, n) !png_sig_cmp((sig), 0, (n)) + +/* Allocate and initialize png_ptr struct for reading, and any other memory. */ +PNG_EXPORTA(4, png_structp, png_create_read_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warn_fn), + PNG_ALLOCATED); + +/* Allocate and initialize png_ptr struct for writing, and any other memory */ +PNG_EXPORTA(5, png_structp, png_create_write_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn), + PNG_ALLOCATED); + +PNG_EXPORT(6, png_size_t, png_get_compression_buffer_size, + (png_const_structp png_ptr)); + +PNG_EXPORT(7, void, png_set_compression_buffer_size, (png_structp png_ptr, + png_size_t size)); + +/* Moved from pngconf.h in 1.4.0 and modified to ensure setjmp/longjmp + * match up. + */ +#ifdef PNG_SETJMP_SUPPORTED +/* This function returns the jmp_buf built in to *png_ptr. It must be + * supplied with an appropriate 'longjmp' function to use on that jmp_buf + * unless the default error function is overridden in which case NULL is + * acceptable. The size of the jmp_buf is checked against the actual size + * allocated by the library - the call will return NULL on a mismatch + * indicating an ABI mismatch. + */ +PNG_EXPORT(8, jmp_buf*, png_set_longjmp_fn, (png_structp png_ptr, + png_longjmp_ptr longjmp_fn, size_t jmp_buf_size)); +# define png_jmpbuf(png_ptr) \ + (*png_set_longjmp_fn((png_ptr), longjmp, sizeof (jmp_buf))) +#else +# define png_jmpbuf(png_ptr) \ + (LIBPNG_WAS_COMPILED_WITH__PNG_NO_SETJMP) +#endif +/* This function should be used by libpng applications in place of + * longjmp(png_ptr->jmpbuf, val). If longjmp_fn() has been set, it + * will use it; otherwise it will call PNG_ABORT(). This function was + * added in libpng-1.5.0. + */ +PNG_EXPORTA(9, void, png_longjmp, (png_structp png_ptr, int val), + PNG_NORETURN); + +#ifdef PNG_READ_SUPPORTED +/* Reset the compression stream */ +PNG_EXPORT(10, int, png_reset_zstream, (png_structp png_ptr)); +#endif + +/* New functions added in libpng-1.0.2 (not enabled by default until 1.2.0) */ +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(11, png_structp, png_create_read_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +PNG_EXPORTA(12, png_structp, png_create_write_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +#endif + +/* Write the PNG file signature. */ +PNG_EXPORT(13, void, png_write_sig, (png_structp png_ptr)); + +/* Write a PNG chunk - size, type, (optional) data, CRC. */ +PNG_EXPORT(14, void, png_write_chunk, (png_structp png_ptr, png_const_bytep + chunk_name, png_const_bytep data, png_size_t length)); + +/* Write the start of a PNG chunk - length and chunk name. */ +PNG_EXPORT(15, void, png_write_chunk_start, (png_structp png_ptr, + png_const_bytep chunk_name, png_uint_32 length)); + +/* Write the data of a PNG chunk started with png_write_chunk_start(). */ +PNG_EXPORT(16, void, png_write_chunk_data, (png_structp png_ptr, + png_const_bytep data, png_size_t length)); + +/* Finish a chunk started with png_write_chunk_start() (includes CRC). */ +PNG_EXPORT(17, void, png_write_chunk_end, (png_structp png_ptr)); + +/* Allocate and initialize the info structure */ +PNG_EXPORTA(18, png_infop, png_create_info_struct, (png_structp png_ptr), + PNG_ALLOCATED); + +PNG_EXPORT(19, void, png_info_init_3, (png_infopp info_ptr, + png_size_t png_info_struct_size)); + +/* Writes all the PNG information before the image. */ +PNG_EXPORT(20, void, png_write_info_before_PLTE, + (png_structp png_ptr, png_infop info_ptr)); +PNG_EXPORT(21, void, png_write_info, + (png_structp png_ptr, png_infop info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the information before the actual image data. */ +PNG_EXPORT(22, void, png_read_info, + (png_structp png_ptr, png_infop info_ptr)); +#endif + +#ifdef PNG_TIME_RFC1123_SUPPORTED +PNG_EXPORT(23, png_const_charp, png_convert_to_rfc1123, + (png_structp png_ptr, + png_const_timep ptime)); +#endif + +#ifdef PNG_CONVERT_tIME_SUPPORTED +/* Convert from a struct tm to png_time */ +PNG_EXPORT(24, void, png_convert_from_struct_tm, (png_timep ptime, + PNG_CONST struct tm FAR * ttime)); + +/* Convert from time_t to png_time. Uses gmtime() */ +PNG_EXPORT(25, void, png_convert_from_time_t, + (png_timep ptime, time_t ttime)); +#endif /* PNG_CONVERT_tIME_SUPPORTED */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* Expand data to 24-bit RGB, or 8-bit grayscale, with alpha if available. */ +PNG_EXPORT(26, void, png_set_expand, (png_structp png_ptr)); +PNG_EXPORT(27, void, png_set_expand_gray_1_2_4_to_8, (png_structp png_ptr)); +PNG_EXPORT(28, void, png_set_palette_to_rgb, (png_structp png_ptr)); +PNG_EXPORT(29, void, png_set_tRNS_to_alpha, (png_structp png_ptr)); +#endif + +#ifdef PNG_READ_EXPAND_16_SUPPORTED +/* Expand to 16-bit channels, forces conversion of palette to RGB and expansion + * of a tRNS chunk if present. + */ +PNG_EXPORT(221, void, png_set_expand_16, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED) +/* Use blue, green, red order for pixels. */ +PNG_EXPORT(30, void, png_set_bgr, (png_structp png_ptr)); +#endif + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED +/* Expand the grayscale to 24-bit RGB if necessary. */ +PNG_EXPORT(31, void, png_set_gray_to_rgb, (png_structp png_ptr)); +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +/* Reduce RGB to grayscale. */ +#define PNG_ERROR_ACTION_NONE 1 +#define PNG_ERROR_ACTION_WARN 2 +#define PNG_ERROR_ACTION_ERROR 3 +#define PNG_RGB_TO_GRAY_DEFAULT (-1)/*for red/green coefficients*/ + +PNG_FP_EXPORT(32, void, png_set_rgb_to_gray, (png_structp png_ptr, + int error_action, double red, double green)) +PNG_FIXED_EXPORT(33, void, png_set_rgb_to_gray_fixed, (png_structp png_ptr, + int error_action, png_fixed_point red, png_fixed_point green)) + +PNG_EXPORT(34, png_byte, png_get_rgb_to_gray_status, (png_const_structp + png_ptr)); +#endif + +#ifdef PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED +PNG_EXPORT(35, void, png_build_grayscale_palette, (int bit_depth, + png_colorp palette)); +#endif + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED +/* How the alpha channel is interpreted - this affects how the color channels of + * a PNG file are returned when an alpha channel, or tRNS chunk in a palette + * file, is present. + * + * This has no effect on the way pixels are written into a PNG output + * datastream. The color samples in a PNG datastream are never premultiplied + * with the alpha samples. + * + * The default is to return data according to the PNG specification: the alpha + * channel is a linear measure of the contribution of the pixel to the + * corresponding composited pixel. The gamma encoded color channels must be + * scaled according to the contribution and to do this it is necessary to undo + * the encoding, scale the color values, perform the composition and reencode + * the values. This is the 'PNG' mode. + * + * The alternative is to 'associate' the alpha with the color information by + * storing color channel values that have been scaled by the alpha. The + * advantage is that the color channels can be resampled (the image can be + * scaled) in this form. The disadvantage is that normal practice is to store + * linear, not (gamma) encoded, values and this requires 16-bit channels for + * still images rather than the 8-bit channels that are just about sufficient if + * gamma encoding is used. In addition all non-transparent pixel values, + * including completely opaque ones, must be gamma encoded to produce the final + * image. This is the 'STANDARD', 'ASSOCIATED' or 'PREMULTIPLIED' mode (the + * latter being the two common names for associated alpha color channels.) + * + * Since it is not necessary to perform arithmetic on opaque color values so + * long as they are not to be resampled and are in the final color space it is + * possible to optimize the handling of alpha by storing the opaque pixels in + * the PNG format (adjusted for the output color space) while storing partially + * opaque pixels in the standard, linear, format. The accuracy required for + * standard alpha composition is relatively low, because the pixels are + * isolated, therefore typically the accuracy loss in storing 8-bit linear + * values is acceptable. (This is not true if the alpha channel is used to + * simulate transparency over large areas - use 16 bits or the PNG mode in + * this case!) This is the 'OPTIMIZED' mode. For this mode a pixel is + * treated as opaque only if the alpha value is equal to the maximum value. + * + * The final choice is to gamma encode the alpha channel as well. This is + * broken because, in practice, no implementation that uses this choice + * correctly undoes the encoding before handling alpha composition. Use this + * choice only if other serious errors in the software or hardware you use + * mandate it; the typical serious error is for dark halos to appear around + * opaque areas of the composited PNG image because of arithmetic overflow. + * + * The API function png_set_alpha_mode specifies which of these choices to use + * with an enumerated 'mode' value and the gamma of the required output: + */ +#define PNG_ALPHA_PNG 0 /* according to the PNG standard */ +#define PNG_ALPHA_STANDARD 1 /* according to Porter/Duff */ +#define PNG_ALPHA_ASSOCIATED 1 /* as above; this is the normal practice */ +#define PNG_ALPHA_PREMULTIPLIED 1 /* as above */ +#define PNG_ALPHA_OPTIMIZED 2 /* 'PNG' for opaque pixels, else 'STANDARD' */ +#define PNG_ALPHA_BROKEN 3 /* the alpha channel is gamma encoded */ + +PNG_FP_EXPORT(227, void, png_set_alpha_mode, (png_structp png_ptr, int mode, + double output_gamma)) +PNG_FIXED_EXPORT(228, void, png_set_alpha_mode_fixed, (png_structp png_ptr, + int mode, png_fixed_point output_gamma)) +#endif + +#if defined(PNG_READ_GAMMA_SUPPORTED) || defined(PNG_READ_ALPHA_MODE_SUPPORTED) +/* The output_gamma value is a screen gamma in libpng terminology: it expresses + * how to decode the output values, not how they are encoded. The values used + * correspond to the normal numbers used to describe the overall gamma of a + * computer display system; for example 2.2 for an sRGB conformant system. The + * values are scaled by 100000 in the _fixed version of the API (so 220000 for + * sRGB.) + * + * The inverse of the value is always used to provide a default for the PNG file + * encoding if it has no gAMA chunk and if png_set_gamma() has not been called + * to override the PNG gamma information. + * + * When the ALPHA_OPTIMIZED mode is selected the output gamma is used to encode + * opaque pixels however pixels with lower alpha values are not encoded, + * regardless of the output gamma setting. + * + * When the standard Porter Duff handling is requested with mode 1 the output + * encoding is set to be linear and the output_gamma value is only relevant + * as a default for input data that has no gamma information. The linear output + * encoding will be overridden if png_set_gamma() is called - the results may be + * highly unexpected! + * + * The following numbers are derived from the sRGB standard and the research + * behind it. sRGB is defined to be approximated by a PNG gAMA chunk value of + * 0.45455 (1/2.2) for PNG. The value implicitly includes any viewing + * correction required to take account of any differences in the color + * environment of the original scene and the intended display environment; the + * value expresses how to *decode* the image for display, not how the original + * data was *encoded*. + * + * sRGB provides a peg for the PNG standard by defining a viewing environment. + * sRGB itself, and earlier TV standards, actually use a more complex transform + * (a linear portion then a gamma 2.4 power law) than PNG can express. (PNG is + * limited to simple power laws.) By saying that an image for direct display on + * an sRGB conformant system should be stored with a gAMA chunk value of 45455 + * (11.3.3.2 and 11.3.3.5 of the ISO PNG specification) the PNG specification + * makes it possible to derive values for other display systems and + * environments. + * + * The Mac value is deduced from the sRGB based on an assumption that the actual + * extra viewing correction used in early Mac display systems was implemented as + * a power 1.45 lookup table. + * + * Any system where a programmable lookup table is used or where the behavior of + * the final display device characteristics can be changed requires system + * specific code to obtain the current characteristic. However this can be + * difficult and most PNG gamma correction only requires an approximate value. + * + * By default, if png_set_alpha_mode() is not called, libpng assumes that all + * values are unencoded, linear, values and that the output device also has a + * linear characteristic. This is only very rarely correct - it is invariably + * better to call png_set_alpha_mode() with PNG_DEFAULT_sRGB than rely on the + * default if you don't know what the right answer is! + * + * The special value PNG_GAMMA_MAC_18 indicates an older Mac system (pre Mac OS + * 10.6) which used a correction table to implement a somewhat lower gamma on an + * otherwise sRGB system. + * + * Both these values are reserved (not simple gamma values) in order to allow + * more precise correction internally in the future. + * + * NOTE: the following values can be passed to either the fixed or floating + * point APIs, but the floating point API will also accept floating point + * values. + */ +#define PNG_DEFAULT_sRGB -1 /* sRGB gamma and color space */ +#define PNG_GAMMA_MAC_18 -2 /* Old Mac '1.8' gamma and color space */ +#define PNG_GAMMA_sRGB 220000 /* Television standards--matches sRGB gamma */ +#define PNG_GAMMA_LINEAR PNG_FP_1 /* Linear */ +#endif + +/* The following are examples of calls to png_set_alpha_mode to achieve the + * required overall gamma correction and, where necessary, alpha + * premultiplication. + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB); + * This is the default libpng handling of the alpha channel - it is not + * pre-multiplied into the color components. In addition the call states + * that the output is for a sRGB system and causes all PNG files without gAMA + * chunks to be assumed to be encoded using sRGB. + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC); + * In this case the output is assumed to be something like an sRGB conformant + * display preceeded by a power-law lookup table of power 1.45. This is how + * early Mac systems behaved. + * + * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_GAMMA_LINEAR); + * This is the classic Jim Blinn approach and will work in academic + * environments where everything is done by the book. It has the shortcoming + * of assuming that input PNG data with no gamma information is linear - this + * is unlikely to be correct unless the PNG files where generated locally. + * Most of the time the output precision will be so low as to show + * significant banding in dark areas of the image. + * + * png_set_expand_16(pp); + * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_DEFAULT_sRGB); + * This is a somewhat more realistic Jim Blinn inspired approach. PNG files + * are assumed to have the sRGB encoding if not marked with a gamma value and + * the output is always 16 bits per component. This permits accurate scaling + * and processing of the data. If you know that your input PNG files were + * generated locally you might need to replace PNG_DEFAULT_sRGB with the + * correct value for your system. + * + * png_set_alpha_mode(pp, PNG_ALPHA_OPTIMIZED, PNG_DEFAULT_sRGB); + * If you just need to composite the PNG image onto an existing background + * and if you control the code that does this you can use the optimization + * setting. In this case you just copy completely opaque pixels to the + * output. For pixels that are not completely transparent (you just skip + * those) you do the composition math using png_composite or png_composite_16 + * below then encode the resultant 8-bit or 16-bit values to match the output + * encoding. + * + * Other cases + * If neither the PNG nor the standard linear encoding work for you because + * of the software or hardware you use then you have a big problem. The PNG + * case will probably result in halos around the image. The linear encoding + * will probably result in a washed out, too bright, image (it's actually too + * contrasty.) Try the ALPHA_OPTIMIZED mode above - this will probably + * substantially reduce the halos. Alternatively try: + * + * png_set_alpha_mode(pp, PNG_ALPHA_BROKEN, PNG_DEFAULT_sRGB); + * This option will also reduce the halos, but there will be slight dark + * halos round the opaque parts of the image where the background is light. + * In the OPTIMIZED mode the halos will be light halos where the background + * is dark. Take your pick - the halos are unavoidable unless you can get + * your hardware/software fixed! (The OPTIMIZED approach is slightly + * faster.) + * + * When the default gamma of PNG files doesn't match the output gamma. + * If you have PNG files with no gamma information png_set_alpha_mode allows + * you to provide a default gamma, but it also sets the ouput gamma to the + * matching value. If you know your PNG files have a gamma that doesn't + * match the output you can take advantage of the fact that + * png_set_alpha_mode always sets the output gamma but only sets the PNG + * default if it is not already set: + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB); + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC); + * The first call sets both the default and the output gamma values, the + * second call overrides the output gamma without changing the default. This + * is easier than achieving the same effect with png_set_gamma. You must use + * PNG_ALPHA_PNG for the first call - internal checking in png_set_alpha will + * fire if more than one call to png_set_alpha_mode and png_set_background is + * made in the same read operation, however multiple calls with PNG_ALPHA_PNG + * are ignored. + */ + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED +PNG_EXPORT(36, void, png_set_strip_alpha, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_SWAP_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_SWAP_ALPHA_SUPPORTED) +PNG_EXPORT(37, void, png_set_swap_alpha, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_INVERT_ALPHA_SUPPORTED) +PNG_EXPORT(38, void, png_set_invert_alpha, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED) +/* Add a filler byte to 8-bit Gray or 24-bit RGB images. */ +PNG_EXPORT(39, void, png_set_filler, (png_structp png_ptr, png_uint_32 filler, + int flags)); +/* The values of the PNG_FILLER_ defines should NOT be changed */ +# define PNG_FILLER_BEFORE 0 +# define PNG_FILLER_AFTER 1 +/* Add an alpha byte to 8-bit Gray or 24-bit RGB images. */ +PNG_EXPORT(40, void, png_set_add_alpha, + (png_structp png_ptr, png_uint_32 filler, + int flags)); +#endif /* PNG_READ_FILLER_SUPPORTED || PNG_WRITE_FILLER_SUPPORTED */ + +#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED) +/* Swap bytes in 16-bit depth files. */ +PNG_EXPORT(41, void, png_set_swap, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_PACK_SUPPORTED) || defined(PNG_WRITE_PACK_SUPPORTED) +/* Use 1 byte per pixel in 1, 2, or 4-bit depth files. */ +PNG_EXPORT(42, void, png_set_packing, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_PACKSWAP_SUPPORTED) || \ + defined(PNG_WRITE_PACKSWAP_SUPPORTED) +/* Swap packing order of pixels in bytes. */ +PNG_EXPORT(43, void, png_set_packswap, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED) +/* Converts files to legal bit depths. */ +PNG_EXPORT(44, void, png_set_shift, (png_structp png_ptr, png_const_color_8p + true_bits)); +#endif + +#if defined(PNG_READ_INTERLACING_SUPPORTED) || \ + defined(PNG_WRITE_INTERLACING_SUPPORTED) +/* Have the code handle the interlacing. Returns the number of passes. + * MUST be called before png_read_update_info or png_start_read_image, + * otherwise it will not have the desired effect. Note that it is still + * necessary to call png_read_row or png_read_rows png_get_image_height + * times for each pass. +*/ +PNG_EXPORT(45, int, png_set_interlace_handling, (png_structp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED) +/* Invert monochrome files */ +PNG_EXPORT(46, void, png_set_invert_mono, (png_structp png_ptr)); +#endif + +#ifdef PNG_READ_BACKGROUND_SUPPORTED +/* Handle alpha and tRNS by replacing with a background color. Prior to + * libpng-1.5.4 this API must not be called before the PNG file header has been + * read. Doing so will result in unexpected behavior and possible warnings or + * errors if the PNG file contains a bKGD chunk. + */ +PNG_FP_EXPORT(47, void, png_set_background, (png_structp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, double background_gamma)) +PNG_FIXED_EXPORT(215, void, png_set_background_fixed, (png_structp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, png_fixed_point background_gamma)) +#endif +#ifdef PNG_READ_BACKGROUND_SUPPORTED +# define PNG_BACKGROUND_GAMMA_UNKNOWN 0 +# define PNG_BACKGROUND_GAMMA_SCREEN 1 +# define PNG_BACKGROUND_GAMMA_FILE 2 +# define PNG_BACKGROUND_GAMMA_UNIQUE 3 +#endif + +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED +/* Scale a 16-bit depth file down to 8-bit, accurately. */ +PNG_EXPORT(229, void, png_set_scale_16, (png_structp png_ptr)); +#endif + +#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED +#define PNG_READ_16_TO_8 SUPPORTED /* Name prior to 1.5.4 */ +/* Strip the second byte of information from a 16-bit depth file. */ +PNG_EXPORT(48, void, png_set_strip_16, (png_structp png_ptr)); +#endif + +#ifdef PNG_READ_QUANTIZE_SUPPORTED +/* Turn on quantizing, and reduce the palette to the number of colors + * available. + */ +PNG_EXPORT(49, void, png_set_quantize, + (png_structp png_ptr, png_colorp palette, + int num_palette, int maximum_colors, png_const_uint_16p histogram, + int full_quantize)); +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED +/* The threshold on gamma processing is configurable but hard-wired into the + * library. The following is the floating point variant. + */ +#define PNG_GAMMA_THRESHOLD (PNG_GAMMA_THRESHOLD_FIXED*.00001) + +/* Handle gamma correction. Screen_gamma=(display_exponent). + * NOTE: this API simply sets the screen and file gamma values. It will + * therefore override the value for gamma in a PNG file if it is called after + * the file header has been read - use with care - call before reading the PNG + * file for best results! + * + * These routines accept the same gamma values as png_set_alpha_mode (described + * above). The PNG_GAMMA_ defines and PNG_DEFAULT_sRGB can be passed to either + * API (floating point or fixed.) Notice, however, that the 'file_gamma' value + * is the inverse of a 'screen gamma' value. + */ +PNG_FP_EXPORT(50, void, png_set_gamma, + (png_structp png_ptr, double screen_gamma, + double override_file_gamma)) +PNG_FIXED_EXPORT(208, void, png_set_gamma_fixed, (png_structp png_ptr, + png_fixed_point screen_gamma, png_fixed_point override_file_gamma)) +#endif + +#ifdef PNG_WRITE_FLUSH_SUPPORTED +/* Set how many lines between output flushes - 0 for no flushing */ +PNG_EXPORT(51, void, png_set_flush, (png_structp png_ptr, int nrows)); +/* Flush the current PNG output buffer */ +PNG_EXPORT(52, void, png_write_flush, (png_structp png_ptr)); +#endif + +/* Optional update palette with requested transformations */ +PNG_EXPORT(53, void, png_start_read_image, (png_structp png_ptr)); + +/* Optional call to update the users info structure */ +PNG_EXPORT(54, void, png_read_update_info, + (png_structp png_ptr, png_infop info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read one or more rows of image data. */ +PNG_EXPORT(55, void, png_read_rows, (png_structp png_ptr, png_bytepp row, + png_bytepp display_row, png_uint_32 num_rows)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read a row of data. */ +PNG_EXPORT(56, void, png_read_row, (png_structp png_ptr, png_bytep row, + png_bytep display_row)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the whole image into memory at once. */ +PNG_EXPORT(57, void, png_read_image, (png_structp png_ptr, png_bytepp image)); +#endif + +/* Write a row of image data */ +PNG_EXPORT(58, void, png_write_row, + (png_structp png_ptr, png_const_bytep row)); + +/* Write a few rows of image data: (*row) is not written; however, the type + * is declared as writeable to maintain compatibility with previous versions + * of libpng and to allow the 'display_row' array from read_rows to be passed + * unchanged to write_rows. + */ +PNG_EXPORT(59, void, png_write_rows, (png_structp png_ptr, png_bytepp row, + png_uint_32 num_rows)); + +/* Write the image data */ +PNG_EXPORT(60, void, png_write_image, + (png_structp png_ptr, png_bytepp image)); + +/* Write the end of the PNG file. */ +PNG_EXPORT(61, void, png_write_end, + (png_structp png_ptr, png_infop info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the end of the PNG file. */ +PNG_EXPORT(62, void, png_read_end, (png_structp png_ptr, png_infop info_ptr)); +#endif + +/* Free any memory associated with the png_info_struct */ +PNG_EXPORT(63, void, png_destroy_info_struct, (png_structp png_ptr, + png_infopp info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(64, void, png_destroy_read_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr, png_infopp end_info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(65, void, png_destroy_write_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr)); + +/* Set the libpng method of handling chunk CRC errors */ +PNG_EXPORT(66, void, png_set_crc_action, + (png_structp png_ptr, int crit_action, int ancil_action)); + +/* Values for png_set_crc_action() say how to handle CRC errors in + * ancillary and critical chunks, and whether to use the data contained + * therein. Note that it is impossible to "discard" data in a critical + * chunk. For versions prior to 0.90, the action was always error/quit, + * whereas in version 0.90 and later, the action for CRC errors in ancillary + * chunks is warn/discard. These values should NOT be changed. + * + * value action:critical action:ancillary + */ +#define PNG_CRC_DEFAULT 0 /* error/quit warn/discard data */ +#define PNG_CRC_ERROR_QUIT 1 /* error/quit error/quit */ +#define PNG_CRC_WARN_DISCARD 2 /* (INVALID) warn/discard data */ +#define PNG_CRC_WARN_USE 3 /* warn/use data warn/use data */ +#define PNG_CRC_QUIET_USE 4 /* quiet/use data quiet/use data */ +#define PNG_CRC_NO_CHANGE 5 /* use current value use current value */ + +/* These functions give the user control over the scan-line filtering in + * libpng and the compression methods used by zlib. These functions are + * mainly useful for testing, as the defaults should work with most users. + * Those users who are tight on memory or want faster performance at the + * expense of compression can modify them. See the compression library + * header file (zlib.h) for an explination of the compression functions. + */ + +/* Set the filtering method(s) used by libpng. Currently, the only valid + * value for "method" is 0. + */ +PNG_EXPORT(67, void, png_set_filter, + (png_structp png_ptr, int method, int filters)); + +/* Flags for png_set_filter() to say which filters to use. The flags + * are chosen so that they don't conflict with real filter types + * below, in case they are supplied instead of the #defined constants. + * These values should NOT be changed. + */ +#define PNG_NO_FILTERS 0x00 +#define PNG_FILTER_NONE 0x08 +#define PNG_FILTER_SUB 0x10 +#define PNG_FILTER_UP 0x20 +#define PNG_FILTER_AVG 0x40 +#define PNG_FILTER_PAETH 0x80 +#define PNG_ALL_FILTERS (PNG_FILTER_NONE | PNG_FILTER_SUB | PNG_FILTER_UP | \ + PNG_FILTER_AVG | PNG_FILTER_PAETH) + +/* Filter values (not flags) - used in pngwrite.c, pngwutil.c for now. + * These defines should NOT be changed. + */ +#define PNG_FILTER_VALUE_NONE 0 +#define PNG_FILTER_VALUE_SUB 1 +#define PNG_FILTER_VALUE_UP 2 +#define PNG_FILTER_VALUE_AVG 3 +#define PNG_FILTER_VALUE_PAETH 4 +#define PNG_FILTER_VALUE_LAST 5 + +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED /* EXPERIMENTAL */ +/* The "heuristic_method" is given by one of the PNG_FILTER_HEURISTIC_ + * defines, either the default (minimum-sum-of-absolute-differences), or + * the experimental method (weighted-minimum-sum-of-absolute-differences). + * + * Weights are factors >= 1.0, indicating how important it is to keep the + * filter type consistent between rows. Larger numbers mean the current + * filter is that many times as likely to be the same as the "num_weights" + * previous filters. This is cumulative for each previous row with a weight. + * There needs to be "num_weights" values in "filter_weights", or it can be + * NULL if the weights aren't being specified. Weights have no influence on + * the selection of the first row filter. Well chosen weights can (in theory) + * improve the compression for a given image. + * + * Costs are factors >= 1.0 indicating the relative decoding costs of a + * filter type. Higher costs indicate more decoding expense, and are + * therefore less likely to be selected over a filter with lower computational + * costs. There needs to be a value in "filter_costs" for each valid filter + * type (given by PNG_FILTER_VALUE_LAST), or it can be NULL if you aren't + * setting the costs. Costs try to improve the speed of decompression without + * unduly increasing the compressed image size. + * + * A negative weight or cost indicates the default value is to be used, and + * values in the range [0.0, 1.0) indicate the value is to remain unchanged. + * The default values for both weights and costs are currently 1.0, but may + * change if good general weighting/cost heuristics can be found. If both + * the weights and costs are set to 1.0, this degenerates the WEIGHTED method + * to the UNWEIGHTED method, but with added encoding time/computation. + */ +PNG_FP_EXPORT(68, void, png_set_filter_heuristics, (png_structp png_ptr, + int heuristic_method, int num_weights, png_const_doublep filter_weights, + png_const_doublep filter_costs)) +PNG_FIXED_EXPORT(209, void, png_set_filter_heuristics_fixed, + (png_structp png_ptr, + int heuristic_method, int num_weights, png_const_fixed_point_p + filter_weights, png_const_fixed_point_p filter_costs)) +#endif /* PNG_WRITE_WEIGHTED_FILTER_SUPPORTED */ + +/* Heuristic used for row filter selection. These defines should NOT be + * changed. + */ +#define PNG_FILTER_HEURISTIC_DEFAULT 0 /* Currently "UNWEIGHTED" */ +#define PNG_FILTER_HEURISTIC_UNWEIGHTED 1 /* Used by libpng < 0.95 */ +#define PNG_FILTER_HEURISTIC_WEIGHTED 2 /* Experimental feature */ +#define PNG_FILTER_HEURISTIC_LAST 3 /* Not a valid value */ + +#ifdef PNG_WRITE_SUPPORTED +/* Set the library compression level. Currently, valid values range from + * 0 - 9, corresponding directly to the zlib compression levels 0 - 9 + * (0 - no compression, 9 - "maximal" compression). Note that tests have + * shown that zlib compression levels 3-6 usually perform as well as level 9 + * for PNG images, and do considerably fewer caclulations. In the future, + * these values may not correspond directly to the zlib compression levels. + */ +PNG_EXPORT(69, void, png_set_compression_level, + (png_structp png_ptr, int level)); + +PNG_EXPORT(70, void, png_set_compression_mem_level, (png_structp png_ptr, + int mem_level)); + +PNG_EXPORT(71, void, png_set_compression_strategy, (png_structp png_ptr, + int strategy)); + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +PNG_EXPORT(72, void, png_set_compression_window_bits, (png_structp png_ptr, + int window_bits)); + +PNG_EXPORT(73, void, png_set_compression_method, (png_structp png_ptr, + int method)); +#endif + +#ifdef PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED +/* Also set zlib parameters for compressing non-IDAT chunks */ +PNG_EXPORT(222, void, png_set_text_compression_level, + (png_structp png_ptr, int level)); + +PNG_EXPORT(223, void, png_set_text_compression_mem_level, (png_structp png_ptr, + int mem_level)); + +PNG_EXPORT(224, void, png_set_text_compression_strategy, (png_structp png_ptr, + int strategy)); + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +PNG_EXPORT(225, void, png_set_text_compression_window_bits, (png_structp + png_ptr, int window_bits)); + +PNG_EXPORT(226, void, png_set_text_compression_method, (png_structp png_ptr, + int method)); +#endif /* PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED */ + +/* These next functions are called for input/output, memory, and error + * handling. They are in the file pngrio.c, pngwio.c, and pngerror.c, + * and call standard C I/O routines such as fread(), fwrite(), and + * fprintf(). These functions can be made to use other I/O routines + * at run time for those applications that need to handle I/O in a + * different manner by calling png_set_???_fn(). See libpng-manual.txt for + * more information. + */ + +#ifdef PNG_STDIO_SUPPORTED +/* Initialize the input/output for the PNG file to the default functions. */ +PNG_EXPORT(74, void, png_init_io, (png_structp png_ptr, png_FILE_p fp)); +#endif + +/* Replace the (error and abort), and warning functions with user + * supplied functions. If no messages are to be printed you must still + * write and use replacement functions. The replacement error_fn should + * still do a longjmp to the last setjmp location if you are using this + * method of error handling. If error_fn or warning_fn is NULL, the + * default function will be used. + */ + +PNG_EXPORT(75, void, png_set_error_fn, + (png_structp png_ptr, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warning_fn)); + +/* Return the user pointer associated with the error functions */ +PNG_EXPORT(76, png_voidp, png_get_error_ptr, (png_const_structp png_ptr)); + +/* Replace the default data output functions with a user supplied one(s). + * If buffered output is not used, then output_flush_fn can be set to NULL. + * If PNG_WRITE_FLUSH_SUPPORTED is not defined at libpng compile time + * output_flush_fn will be ignored (and thus can be NULL). + * It is probably a mistake to use NULL for output_flush_fn if + * write_data_fn is not also NULL unless you have built libpng with + * PNG_WRITE_FLUSH_SUPPORTED undefined, because in this case libpng's + * default flush function, which uses the standard *FILE structure, will + * be used. + */ +PNG_EXPORT(77, void, png_set_write_fn, (png_structp png_ptr, png_voidp io_ptr, + png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn)); + +/* Replace the default data input function with a user supplied one. */ +PNG_EXPORT(78, void, png_set_read_fn, (png_structp png_ptr, png_voidp io_ptr, + png_rw_ptr read_data_fn)); + +/* Return the user pointer associated with the I/O functions */ +PNG_EXPORT(79, png_voidp, png_get_io_ptr, (png_structp png_ptr)); + +PNG_EXPORT(80, void, png_set_read_status_fn, (png_structp png_ptr, + png_read_status_ptr read_row_fn)); + +PNG_EXPORT(81, void, png_set_write_status_fn, (png_structp png_ptr, + png_write_status_ptr write_row_fn)); + +#ifdef PNG_USER_MEM_SUPPORTED +/* Replace the default memory allocation functions with user supplied one(s). */ +PNG_EXPORT(82, void, png_set_mem_fn, (png_structp png_ptr, png_voidp mem_ptr, + png_malloc_ptr malloc_fn, png_free_ptr free_fn)); +/* Return the user pointer associated with the memory functions */ +PNG_EXPORT(83, png_voidp, png_get_mem_ptr, (png_const_structp png_ptr)); +#endif + +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(84, void, png_set_read_user_transform_fn, (png_structp png_ptr, + png_user_transform_ptr read_user_transform_fn)); +#endif + +#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(85, void, png_set_write_user_transform_fn, (png_structp png_ptr, + png_user_transform_ptr write_user_transform_fn)); +#endif + +#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED +PNG_EXPORT(86, void, png_set_user_transform_info, (png_structp png_ptr, + png_voidp user_transform_ptr, int user_transform_depth, + int user_transform_channels)); +/* Return the user pointer associated with the user transform functions */ +PNG_EXPORT(87, png_voidp, png_get_user_transform_ptr, + (png_const_structp png_ptr)); +#endif + +#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED +/* Return information about the row currently being processed. Note that these + * APIs do not fail but will return unexpected results if called outside a user + * transform callback. Also note that when transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +PNG_EXPORT(217, png_uint_32, png_get_current_row_number, (png_const_structp)); +PNG_EXPORT(218, png_byte, png_get_current_pass_number, (png_const_structp)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +PNG_EXPORT(88, void, png_set_read_user_chunk_fn, (png_structp png_ptr, + png_voidp user_chunk_ptr, png_user_chunk_ptr read_user_chunk_fn)); +PNG_EXPORT(89, png_voidp, png_get_user_chunk_ptr, (png_const_structp png_ptr)); +#endif + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +/* Sets the function callbacks for the push reader, and a pointer to a + * user-defined structure available to the callback functions. + */ +PNG_EXPORT(90, void, png_set_progressive_read_fn, (png_structp png_ptr, + png_voidp progressive_ptr, png_progressive_info_ptr info_fn, + png_progressive_row_ptr row_fn, png_progressive_end_ptr end_fn)); + +/* Returns the user pointer associated with the push read functions */ +PNG_EXPORT(91, png_voidp, png_get_progressive_ptr, (png_const_structp png_ptr)); + +/* Function to be called when data becomes available */ +PNG_EXPORT(92, void, png_process_data, + (png_structp png_ptr, png_infop info_ptr, + png_bytep buffer, png_size_t buffer_size)); + +/* A function which may be called *only* within png_process_data to stop the + * processing of any more data. The function returns the number of bytes + * remaining, excluding any that libpng has cached internally. A subsequent + * call to png_process_data must supply these bytes again. If the argument + * 'save' is set to true the routine will first save all the pending data and + * will always return 0. + */ +PNG_EXPORT(219, png_size_t, png_process_data_pause, (png_structp, int save)); + +/* A function which may be called *only* outside (after) a call to + * png_process_data. It returns the number of bytes of data to skip in the + * input. Normally it will return 0, but if it returns a non-zero value the + * application must skip than number of bytes of input data and pass the + * following data to the next call to png_process_data. + */ +PNG_EXPORT(220, png_uint_32, png_process_data_skip, (png_structp)); + +#ifdef PNG_READ_INTERLACING_SUPPORTED +/* Function that combines rows. 'new_row' is a flag that should come from + * the callback and be non-NULL if anything needs to be done; the library + * stores its own version of the new data internally and ignores the passed + * in value. + */ +PNG_EXPORT(93, void, png_progressive_combine_row, (png_structp png_ptr, + png_bytep old_row, png_const_bytep new_row)); +#endif /* PNG_READ_INTERLACING_SUPPORTED */ +#endif /* PNG_PROGRESSIVE_READ_SUPPORTED */ + +PNG_EXPORTA(94, png_voidp, png_malloc, + (png_structp png_ptr, png_alloc_size_t size), + PNG_ALLOCATED); +/* Added at libpng version 1.4.0 */ +PNG_EXPORTA(95, png_voidp, png_calloc, + (png_structp png_ptr, png_alloc_size_t size), + PNG_ALLOCATED); + +/* Added at libpng version 1.2.4 */ +PNG_EXPORTA(96, png_voidp, png_malloc_warn, (png_structp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); + +/* Frees a pointer allocated by png_malloc() */ +PNG_EXPORT(97, void, png_free, (png_structp png_ptr, png_voidp ptr)); + +/* Free data that was allocated internally */ +PNG_EXPORT(98, void, png_free_data, + (png_structp png_ptr, png_infop info_ptr, png_uint_32 free_me, int num)); + +/* Reassign responsibility for freeing existing data, whether allocated + * by libpng or by the application */ +PNG_EXPORT(99, void, png_data_freer, + (png_structp png_ptr, png_infop info_ptr, int freer, png_uint_32 mask)); + +/* Assignments for png_data_freer */ +#define PNG_DESTROY_WILL_FREE_DATA 1 +#define PNG_SET_WILL_FREE_DATA 1 +#define PNG_USER_WILL_FREE_DATA 2 +/* Flags for png_ptr->free_me and info_ptr->free_me */ +#define PNG_FREE_HIST 0x0008 +#define PNG_FREE_ICCP 0x0010 +#define PNG_FREE_SPLT 0x0020 +#define PNG_FREE_ROWS 0x0040 +#define PNG_FREE_PCAL 0x0080 +#define PNG_FREE_SCAL 0x0100 +#define PNG_FREE_UNKN 0x0200 +#define PNG_FREE_LIST 0x0400 +#define PNG_FREE_PLTE 0x1000 +#define PNG_FREE_TRNS 0x2000 +#define PNG_FREE_TEXT 0x4000 +#define PNG_FREE_ALL 0x7fff +#define PNG_FREE_MUL 0x4220 /* PNG_FREE_SPLT|PNG_FREE_TEXT|PNG_FREE_UNKN */ + +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(100, png_voidp, png_malloc_default, (png_structp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); +PNG_EXPORT(101, void, png_free_default, (png_structp png_ptr, png_voidp ptr)); +#endif + +#ifdef PNG_ERROR_TEXT_SUPPORTED +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(102, void, png_error, + (png_structp png_ptr, png_const_charp error_message), + PNG_NORETURN); + +/* The same, but the chunk name is prepended to the error string. */ +PNG_EXPORTA(103, void, png_chunk_error, (png_structp png_ptr, + png_const_charp error_message), PNG_NORETURN); + +#else +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(104, void, png_err, (png_structp png_ptr), PNG_NORETURN); +#endif + +#ifdef PNG_WARNINGS_SUPPORTED +/* Non-fatal error in libpng. Can continue, but may have a problem. */ +PNG_EXPORT(105, void, png_warning, (png_structp png_ptr, + png_const_charp warning_message)); + +/* Non-fatal error in libpng, chunk name is prepended to message. */ +PNG_EXPORT(106, void, png_chunk_warning, (png_structp png_ptr, + png_const_charp warning_message)); +#endif + +#ifdef PNG_BENIGN_ERRORS_SUPPORTED +/* Benign error in libpng. Can continue, but may have a problem. + * User can choose whether to handle as a fatal error or as a warning. */ +# undef png_benign_error +PNG_EXPORT(107, void, png_benign_error, (png_structp png_ptr, + png_const_charp warning_message)); + +/* Same, chunk name is prepended to message. */ +# undef png_chunk_benign_error +PNG_EXPORT(108, void, png_chunk_benign_error, (png_structp png_ptr, + png_const_charp warning_message)); + +PNG_EXPORT(109, void, png_set_benign_errors, + (png_structp png_ptr, int allowed)); +#else +# ifdef PNG_ALLOW_BENIGN_ERRORS +# define png_benign_error png_warning +# define png_chunk_benign_error png_chunk_warning +# else +# define png_benign_error png_error +# define png_chunk_benign_error png_chunk_error +# endif +#endif + +/* The png_set_ functions are for storing values in the png_info_struct. + * Similarly, the png_get_ calls are used to read values from the + * png_info_struct, either storing the parameters in the passed variables, or + * setting pointers into the png_info_struct where the data is stored. The + * png_get_ functions return a non-zero value if the data was available + * in info_ptr, or return zero and do not change any of the parameters if the + * data was not available. + * + * These functions should be used instead of directly accessing png_info + * to avoid problems with future changes in the size and internal layout of + * png_info_struct. + */ +/* Returns "flag" if chunk data is valid in info_ptr. */ +PNG_EXPORT(110, png_uint_32, png_get_valid, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_uint_32 flag)); + +/* Returns number of bytes needed to hold a transformed row. */ +PNG_EXPORT(111, png_size_t, png_get_rowbytes, (png_const_structp png_ptr, + png_const_infop info_ptr)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* Returns row_pointers, which is an array of pointers to scanlines that was + * returned from png_read_png(). + */ +PNG_EXPORT(112, png_bytepp, png_get_rows, + (png_const_structp png_ptr, png_const_infop info_ptr)); +/* Set row_pointers, which is an array of pointers to scanlines for use + * by png_write_png(). + */ +PNG_EXPORT(113, void, png_set_rows, (png_structp png_ptr, + png_infop info_ptr, png_bytepp row_pointers)); +#endif + +/* Returns number of color channels in image. */ +PNG_EXPORT(114, png_byte, png_get_channels, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +#ifdef PNG_EASY_ACCESS_SUPPORTED +/* Returns image width in pixels. */ +PNG_EXPORT(115, png_uint_32, png_get_image_width, (png_const_structp png_ptr, + png_const_infop info_ptr)); + +/* Returns image height in pixels. */ +PNG_EXPORT(116, png_uint_32, png_get_image_height, (png_const_structp png_ptr, + png_const_infop info_ptr)); + +/* Returns image bit_depth. */ +PNG_EXPORT(117, png_byte, png_get_bit_depth, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +/* Returns image color_type. */ +PNG_EXPORT(118, png_byte, png_get_color_type, (png_const_structp png_ptr, + png_const_infop info_ptr)); + +/* Returns image filter_type. */ +PNG_EXPORT(119, png_byte, png_get_filter_type, (png_const_structp png_ptr, + png_const_infop info_ptr)); + +/* Returns image interlace_type. */ +PNG_EXPORT(120, png_byte, png_get_interlace_type, (png_const_structp png_ptr, + png_const_infop info_ptr)); + +/* Returns image compression_type. */ +PNG_EXPORT(121, png_byte, png_get_compression_type, (png_const_structp png_ptr, + png_const_infop info_ptr)); + +/* Returns image resolution in pixels per meter, from pHYs chunk data. */ +PNG_EXPORT(122, png_uint_32, png_get_pixels_per_meter, + (png_const_structp png_ptr, png_const_infop info_ptr)); +PNG_EXPORT(123, png_uint_32, png_get_x_pixels_per_meter, + (png_const_structp png_ptr, png_const_infop info_ptr)); +PNG_EXPORT(124, png_uint_32, png_get_y_pixels_per_meter, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +/* Returns pixel aspect ratio, computed from pHYs chunk data. */ +PNG_FP_EXPORT(125, float, png_get_pixel_aspect_ratio, + (png_const_structp png_ptr, png_const_infop info_ptr)) +PNG_FIXED_EXPORT(210, png_fixed_point, png_get_pixel_aspect_ratio_fixed, + (png_const_structp png_ptr, png_const_infop info_ptr)) + +/* Returns image x, y offset in pixels or microns, from oFFs chunk data. */ +PNG_EXPORT(126, png_int_32, png_get_x_offset_pixels, + (png_const_structp png_ptr, png_const_infop info_ptr)); +PNG_EXPORT(127, png_int_32, png_get_y_offset_pixels, + (png_const_structp png_ptr, png_const_infop info_ptr)); +PNG_EXPORT(128, png_int_32, png_get_x_offset_microns, + (png_const_structp png_ptr, png_const_infop info_ptr)); +PNG_EXPORT(129, png_int_32, png_get_y_offset_microns, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +#endif /* PNG_EASY_ACCESS_SUPPORTED */ + +/* Returns pointer to signature string read from PNG header */ +PNG_EXPORT(130, png_const_bytep, png_get_signature, + (png_const_structp png_ptr, png_infop info_ptr)); + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(131, png_uint_32, png_get_bKGD, + (png_const_structp png_ptr, png_infop info_ptr, + png_color_16p *background)); +#endif + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(132, void, png_set_bKGD, (png_structp png_ptr, png_infop info_ptr, + png_const_color_16p background)); +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(133, png_uint_32, png_get_cHRM, (png_const_structp png_ptr, + png_const_infop info_ptr, double *white_x, double *white_y, double *red_x, + double *red_y, double *green_x, double *green_y, double *blue_x, + double *blue_y)) +PNG_FP_EXPORT(230, png_uint_32, png_get_cHRM_XYZ, (png_structp png_ptr, + png_const_infop info_ptr, double *red_X, double *red_Y, double *red_Z, + double *green_X, double *green_Y, double *green_Z, double *blue_X, + double *blue_Y, double *blue_Z)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* Otherwise not implemented */ +PNG_FIXED_EXPORT(134, png_uint_32, png_get_cHRM_fixed, + (png_const_structp png_ptr, + png_const_infop info_ptr, png_fixed_point *int_white_x, + png_fixed_point *int_white_y, png_fixed_point *int_red_x, + png_fixed_point *int_red_y, png_fixed_point *int_green_x, + png_fixed_point *int_green_y, png_fixed_point *int_blue_x, + png_fixed_point *int_blue_y)) +#endif +PNG_FIXED_EXPORT(231, png_uint_32, png_get_cHRM_XYZ_fixed, + (png_structp png_ptr, png_const_infop info_ptr, + png_fixed_point *int_red_X, png_fixed_point *int_red_Y, + png_fixed_point *int_red_Z, png_fixed_point *int_green_X, + png_fixed_point *int_green_Y, png_fixed_point *int_green_Z, + png_fixed_point *int_blue_X, png_fixed_point *int_blue_Y, + png_fixed_point *int_blue_Z)) +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(135, void, png_set_cHRM, + (png_structp png_ptr, png_infop info_ptr, + double white_x, double white_y, double red_x, double red_y, double green_x, + double green_y, double blue_x, double blue_y)) +PNG_FP_EXPORT(232, void, png_set_cHRM_XYZ, (png_structp png_ptr, + png_infop info_ptr, double red_X, double red_Y, double red_Z, + double green_X, double green_Y, double green_Z, double blue_X, + double blue_Y, double blue_Z)) +PNG_FIXED_EXPORT(136, void, png_set_cHRM_fixed, (png_structp png_ptr, + png_infop info_ptr, png_fixed_point int_white_x, + png_fixed_point int_white_y, png_fixed_point int_red_x, + png_fixed_point int_red_y, png_fixed_point int_green_x, + png_fixed_point int_green_y, png_fixed_point int_blue_x, + png_fixed_point int_blue_y)) +PNG_FIXED_EXPORT(233, void, png_set_cHRM_XYZ_fixed, (png_structp png_ptr, + png_infop info_ptr, png_fixed_point int_red_X, png_fixed_point int_red_Y, + png_fixed_point int_red_Z, png_fixed_point int_green_X, + png_fixed_point int_green_Y, png_fixed_point int_green_Z, + png_fixed_point int_blue_X, png_fixed_point int_blue_Y, + png_fixed_point int_blue_Z)) +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(137, png_uint_32, png_get_gAMA, + (png_const_structp png_ptr, png_const_infop info_ptr, + double *file_gamma)) +PNG_FIXED_EXPORT(138, png_uint_32, png_get_gAMA_fixed, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_fixed_point *int_file_gamma)) +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(139, void, png_set_gAMA, (png_structp png_ptr, + png_infop info_ptr, double file_gamma)) +PNG_FIXED_EXPORT(140, void, png_set_gAMA_fixed, (png_structp png_ptr, + png_infop info_ptr, png_fixed_point int_file_gamma)) +#endif + +#ifdef PNG_hIST_SUPPORTED +PNG_EXPORT(141, png_uint_32, png_get_hIST, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_uint_16p *hist)); +#endif + +#ifdef PNG_hIST_SUPPORTED +PNG_EXPORT(142, void, png_set_hIST, (png_structp png_ptr, + png_infop info_ptr, png_const_uint_16p hist)); +#endif + +PNG_EXPORT(143, png_uint_32, png_get_IHDR, + (png_structp png_ptr, png_infop info_ptr, + png_uint_32 *width, png_uint_32 *height, int *bit_depth, int *color_type, + int *interlace_method, int *compression_method, int *filter_method)); + +PNG_EXPORT(144, void, png_set_IHDR, + (png_structp png_ptr, png_infop info_ptr, + png_uint_32 width, png_uint_32 height, int bit_depth, int color_type, + int interlace_method, int compression_method, int filter_method)); + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(145, png_uint_32, png_get_oFFs, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_int_32 *offset_x, png_int_32 *offset_y, int *unit_type)); +#endif + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(146, void, png_set_oFFs, + (png_structp png_ptr, png_infop info_ptr, + png_int_32 offset_x, png_int_32 offset_y, int unit_type)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(147, png_uint_32, png_get_pCAL, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_charp *purpose, png_int_32 *X0, png_int_32 *X1, int *type, + int *nparams, + png_charp *units, png_charpp *params)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(148, void, png_set_pCAL, (png_structp png_ptr, + png_infop info_ptr, + png_const_charp purpose, png_int_32 X0, png_int_32 X1, int type, + int nparams, png_const_charp units, png_charpp params)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(149, png_uint_32, png_get_pHYs, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_uint_32 *res_x, png_uint_32 *res_y, int *unit_type)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(150, void, png_set_pHYs, + (png_structp png_ptr, png_infop info_ptr, + png_uint_32 res_x, png_uint_32 res_y, int unit_type)); +#endif + +PNG_EXPORT(151, png_uint_32, png_get_PLTE, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_colorp *palette, int *num_palette)); + +PNG_EXPORT(152, void, png_set_PLTE, + (png_structp png_ptr, png_infop info_ptr, + png_const_colorp palette, int num_palette)); + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(153, png_uint_32, png_get_sBIT, + (png_const_structp png_ptr, png_infop info_ptr, + png_color_8p *sig_bit)); +#endif + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(154, void, png_set_sBIT, + (png_structp png_ptr, png_infop info_ptr, png_const_color_8p sig_bit)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(155, png_uint_32, png_get_sRGB, (png_const_structp png_ptr, + png_const_infop info_ptr, int *file_srgb_intent)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(156, void, png_set_sRGB, + (png_structp png_ptr, png_infop info_ptr, int srgb_intent)); +PNG_EXPORT(157, void, png_set_sRGB_gAMA_and_cHRM, (png_structp png_ptr, + png_infop info_ptr, int srgb_intent)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(158, png_uint_32, png_get_iCCP, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_charpp name, int *compression_type, png_bytepp profile, + png_uint_32 *proflen)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(159, void, png_set_iCCP, + (png_structp png_ptr, png_infop info_ptr, + png_const_charp name, int compression_type, png_const_bytep profile, + png_uint_32 proflen)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(160, png_uint_32, png_get_sPLT, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_sPLT_tpp entries)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(161, void, png_set_sPLT, + (png_structp png_ptr, png_infop info_ptr, + png_const_sPLT_tp entries, int nentries)); +#endif + +#ifdef PNG_TEXT_SUPPORTED +/* png_get_text also returns the number of text chunks in *num_text */ +PNG_EXPORT(162, png_uint_32, png_get_text, + (png_const_structp png_ptr, png_const_infop info_ptr, + png_textp *text_ptr, int *num_text)); +#endif + +/* Note while png_set_text() will accept a structure whose text, + * language, and translated keywords are NULL pointers, the structure + * returned by png_get_text will always contain regular + * zero-terminated C strings. They might be empty strings but + * they will never be NULL pointers. + */ + +#ifdef PNG_TEXT_SUPPORTED +PNG_EXPORT(163, void, png_set_text, + (png_structp png_ptr, png_infop info_ptr, + png_const_textp text_ptr, int num_text)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(164, png_uint_32, png_get_tIME, + (png_const_structp png_ptr, png_infop info_ptr, png_timep *mod_time)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(165, void, png_set_tIME, + (png_structp png_ptr, png_infop info_ptr, png_const_timep mod_time)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(166, png_uint_32, png_get_tRNS, + (png_const_structp png_ptr, png_infop info_ptr, + png_bytep *trans_alpha, int *num_trans, png_color_16p *trans_color)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(167, void, png_set_tRNS, + (png_structp png_ptr, png_infop info_ptr, + png_const_bytep trans_alpha, int num_trans, + png_const_color_16p trans_color)); +#endif + +#ifdef PNG_sCAL_SUPPORTED +PNG_FP_EXPORT(168, png_uint_32, png_get_sCAL, + (png_const_structp png_ptr, png_const_infop info_ptr, + int *unit, double *width, double *height)) +#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED +/* NOTE: this API is currently implemented using floating point arithmetic, + * consequently it can only be used on systems with floating point support. + * In any case the range of values supported by png_fixed_point is small and it + * is highly recommended that png_get_sCAL_s be used instead. + */ +PNG_FIXED_EXPORT(214, png_uint_32, png_get_sCAL_fixed, + (png_structp png_ptr, png_const_infop info_ptr, int *unit, + png_fixed_point *width, + png_fixed_point *height)) +#endif +PNG_EXPORT(169, png_uint_32, png_get_sCAL_s, + (png_const_structp png_ptr, png_const_infop info_ptr, + int *unit, png_charpp swidth, png_charpp sheight)); + +PNG_FP_EXPORT(170, void, png_set_sCAL, + (png_structp png_ptr, png_infop info_ptr, + int unit, double width, double height)) +PNG_FIXED_EXPORT(213, void, png_set_sCAL_fixed, (png_structp png_ptr, + png_infop info_ptr, int unit, png_fixed_point width, + png_fixed_point height)) +PNG_EXPORT(171, void, png_set_sCAL_s, + (png_structp png_ptr, png_infop info_ptr, + int unit, png_const_charp swidth, png_const_charp sheight)); +#endif /* PNG_sCAL_SUPPORTED */ + +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED +/* Provide a list of chunks and how they are to be handled, if the built-in + handling or default unknown chunk handling is not desired. Any chunks not + listed will be handled in the default manner. The IHDR and IEND chunks + must not be listed. Because this turns off the default handling for chunks + that would otherwise be recognized the behavior of libpng transformations may + well become incorrect! + keep = 0: PNG_HANDLE_CHUNK_AS_DEFAULT: follow default behavior + = 1: PNG_HANDLE_CHUNK_NEVER: do not keep + = 2: PNG_HANDLE_CHUNK_IF_SAFE: keep only if safe-to-copy + = 3: PNG_HANDLE_CHUNK_ALWAYS: keep even if unsafe-to-copy +*/ +PNG_EXPORT(172, void, png_set_keep_unknown_chunks, + (png_structp png_ptr, int keep, + png_const_bytep chunk_list, int num_chunks)); + +/* The handling code is returned; the result is therefore true (non-zero) if + * special handling is required, false for the default handling. + */ +PNG_EXPORT(173, int, png_handle_as_unknown, (png_structp png_ptr, + png_const_bytep chunk_name)); +#endif +#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED +PNG_EXPORT(174, void, png_set_unknown_chunks, (png_structp png_ptr, + png_infop info_ptr, png_const_unknown_chunkp unknowns, + int num_unknowns)); +PNG_EXPORT(175, void, png_set_unknown_chunk_location, + (png_structp png_ptr, png_infop info_ptr, int chunk, int location)); +PNG_EXPORT(176, int, png_get_unknown_chunks, (png_const_structp png_ptr, + png_const_infop info_ptr, png_unknown_chunkpp entries)); +#endif + +/* Png_free_data() will turn off the "valid" flag for anything it frees. + * If you need to turn it off for a chunk that your application has freed, + * you can use png_set_invalid(png_ptr, info_ptr, PNG_INFO_CHNK); + */ +PNG_EXPORT(177, void, png_set_invalid, + (png_structp png_ptr, png_infop info_ptr, int mask)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* The "params" pointer is currently not used and is for future expansion. */ +PNG_EXPORT(178, void, png_read_png, (png_structp png_ptr, png_infop info_ptr, + int transforms, png_voidp params)); +PNG_EXPORT(179, void, png_write_png, (png_structp png_ptr, png_infop info_ptr, + int transforms, png_voidp params)); +#endif + +PNG_EXPORT(180, png_const_charp, png_get_copyright, + (png_const_structp png_ptr)); +PNG_EXPORT(181, png_const_charp, png_get_header_ver, + (png_const_structp png_ptr)); +PNG_EXPORT(182, png_const_charp, png_get_header_version, + (png_const_structp png_ptr)); +PNG_EXPORT(183, png_const_charp, png_get_libpng_ver, + (png_const_structp png_ptr)); + +#ifdef PNG_MNG_FEATURES_SUPPORTED +PNG_EXPORT(184, png_uint_32, png_permit_mng_features, (png_structp png_ptr, + png_uint_32 mng_features_permitted)); +#endif + +/* For use in png_set_keep_unknown, added to version 1.2.6 */ +#define PNG_HANDLE_CHUNK_AS_DEFAULT 0 +#define PNG_HANDLE_CHUNK_NEVER 1 +#define PNG_HANDLE_CHUNK_IF_SAFE 2 +#define PNG_HANDLE_CHUNK_ALWAYS 3 + +/* Strip the prepended error numbers ("#nnn ") from error and warning + * messages before passing them to the error or warning handler. + */ +#ifdef PNG_ERROR_NUMBERS_SUPPORTED +PNG_EXPORT(185, void, png_set_strip_error_numbers, + (png_structp png_ptr, + png_uint_32 strip_mode)); +#endif + +/* Added in libpng-1.2.6 */ +#ifdef PNG_SET_USER_LIMITS_SUPPORTED +PNG_EXPORT(186, void, png_set_user_limits, (png_structp png_ptr, + png_uint_32 user_width_max, png_uint_32 user_height_max)); +PNG_EXPORT(187, png_uint_32, png_get_user_width_max, + (png_const_structp png_ptr)); +PNG_EXPORT(188, png_uint_32, png_get_user_height_max, + (png_const_structp png_ptr)); +/* Added in libpng-1.4.0 */ +PNG_EXPORT(189, void, png_set_chunk_cache_max, (png_structp png_ptr, + png_uint_32 user_chunk_cache_max)); +PNG_EXPORT(190, png_uint_32, png_get_chunk_cache_max, + (png_const_structp png_ptr)); +/* Added in libpng-1.4.1 */ +PNG_EXPORT(191, void, png_set_chunk_malloc_max, (png_structp png_ptr, + png_alloc_size_t user_chunk_cache_max)); +PNG_EXPORT(192, png_alloc_size_t, png_get_chunk_malloc_max, + (png_const_structp png_ptr)); +#endif + +#if defined(PNG_INCH_CONVERSIONS_SUPPORTED) +PNG_EXPORT(193, png_uint_32, png_get_pixels_per_inch, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +PNG_EXPORT(194, png_uint_32, png_get_x_pixels_per_inch, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +PNG_EXPORT(195, png_uint_32, png_get_y_pixels_per_inch, + (png_const_structp png_ptr, png_const_infop info_ptr)); + +PNG_FP_EXPORT(196, float, png_get_x_offset_inches, + (png_const_structp png_ptr, png_const_infop info_ptr)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(211, png_fixed_point, png_get_x_offset_inches_fixed, + (png_structp png_ptr, png_const_infop info_ptr)) +#endif + +PNG_FP_EXPORT(197, float, png_get_y_offset_inches, (png_const_structp png_ptr, + png_const_infop info_ptr)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(212, png_fixed_point, png_get_y_offset_inches_fixed, + (png_structp png_ptr, png_const_infop info_ptr)) +#endif + +# ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(198, png_uint_32, png_get_pHYs_dpi, (png_const_structp png_ptr, + png_const_infop info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, + int *unit_type)); +# endif /* PNG_pHYs_SUPPORTED */ +#endif /* PNG_INCH_CONVERSIONS_SUPPORTED */ + +/* Added in libpng-1.4.0 */ +#ifdef PNG_IO_STATE_SUPPORTED +PNG_EXPORT(199, png_uint_32, png_get_io_state, (png_structp png_ptr)); + +PNG_EXPORTA(200, png_const_bytep, png_get_io_chunk_name, + (png_structp png_ptr), PNG_DEPRECATED); +PNG_EXPORT(216, png_uint_32, png_get_io_chunk_type, + (png_const_structp png_ptr)); + +/* The flags returned by png_get_io_state() are the following: */ +# define PNG_IO_NONE 0x0000 /* no I/O at this moment */ +# define PNG_IO_READING 0x0001 /* currently reading */ +# define PNG_IO_WRITING 0x0002 /* currently writing */ +# define PNG_IO_SIGNATURE 0x0010 /* currently at the file signature */ +# define PNG_IO_CHUNK_HDR 0x0020 /* currently at the chunk header */ +# define PNG_IO_CHUNK_DATA 0x0040 /* currently at the chunk data */ +# define PNG_IO_CHUNK_CRC 0x0080 /* currently at the chunk crc */ +# define PNG_IO_MASK_OP 0x000f /* current operation: reading/writing */ +# define PNG_IO_MASK_LOC 0x00f0 /* current location: sig/hdr/data/crc */ +#endif /* ?PNG_IO_STATE_SUPPORTED */ + +/* Interlace support. The following macros are always defined so that if + * libpng interlace handling is turned off the macros may be used to handle + * interlaced images within the application. + */ +#define PNG_INTERLACE_ADAM7_PASSES 7 + +/* Two macros to return the first row and first column of the original, + * full, image which appears in a given pass. 'pass' is in the range 0 + * to 6 and the result is in the range 0 to 7. + */ +#define PNG_PASS_START_ROW(pass) (((1&~(pass))<<(3-((pass)>>1)))&7) +#define PNG_PASS_START_COL(pass) (((1& (pass))<<(3-(((pass)+1)>>1)))&7) + +/* A macro to return the offset between pixels in the output row for a pair of + * pixels in the input - effectively the inverse of the 'COL_SHIFT' macro that + * follows. Note that ROW_OFFSET is the offset from one row to the next whereas + * COL_OFFSET is from one column to the next, within a row. + */ +#define PNG_PASS_ROW_OFFSET(pass) ((pass)>2?(8>>(((pass)-1)>>1)):8) +#define PNG_PASS_COL_OFFSET(pass) (1<<((7-(pass))>>1)) + +/* Two macros to help evaluate the number of rows or columns in each + * pass. This is expressed as a shift - effectively log2 of the number or + * rows or columns in each 8x8 tile of the original image. + */ +#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) +#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) + +/* Hence two macros to determine the number of rows or columns in a given + * pass of an image given its height or width. In fact these macros may + * return non-zero even though the sub-image is empty, because the other + * dimension may be empty for a small image. + */ +#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) +#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) + +/* For the reader row callbacks (both progressive and sequential) it is + * necessary to find the row in the output image given a row in an interlaced + * image, so two more macros: + */ +#define PNG_ROW_FROM_PASS_ROW(yIn, pass) \ + (((yIn)<>(((7-(off))-(pass))<<2)) & 0xF) | \ + ((0x01145AF0>>(((7-(off))-(pass))<<2)) & 0xF0)) + +#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ + ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) +#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ + ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) + +#ifdef PNG_READ_COMPOSITE_NODIV_SUPPORTED +/* With these routines we avoid an integer divide, which will be slower on + * most machines. However, it does take more operations than the corresponding + * divide method, so it may be slower on a few RISC systems. There are two + * shifts (by 8 or 16 bits) and an addition, versus a single integer divide. + * + * Note that the rounding factors are NOT supposed to be the same! 128 and + * 32768 are correct for the NODIV code; 127 and 32767 are correct for the + * standard method. + * + * [Optimized code by Greg Roelofs and Mark Adler...blame us for bugs. :-) ] + */ + + /* fg and bg should be in `gamma 1.0' space; alpha is the opacity */ + +# define png_composite(composite, fg, alpha, bg) \ + { png_uint_16 temp = (png_uint_16)((png_uint_16)(fg) \ + * (png_uint_16)(alpha) \ + + (png_uint_16)(bg)*(png_uint_16)(255 \ + - (png_uint_16)(alpha)) + 128); \ + (composite) = (png_byte)((temp + (temp >> 8)) >> 8); } + +# define png_composite_16(composite, fg, alpha, bg) \ + { png_uint_32 temp = (png_uint_32)((png_uint_32)(fg) \ + * (png_uint_32)(alpha) \ + + (png_uint_32)(bg)*(65535 \ + - (png_uint_32)(alpha)) + 32768); \ + (composite) = (png_uint_16)((temp + (temp >> 16)) >> 16); } + +#else /* Standard method using integer division */ + +# define png_composite(composite, fg, alpha, bg) \ + (composite) = (png_byte)(((png_uint_16)(fg) * (png_uint_16)(alpha) + \ + (png_uint_16)(bg) * (png_uint_16)(255 - (png_uint_16)(alpha)) + \ + 127) / 255) + +# define png_composite_16(composite, fg, alpha, bg) \ + (composite) = (png_uint_16)(((png_uint_32)(fg) * (png_uint_32)(alpha) + \ + (png_uint_32)(bg)*(png_uint_32)(65535 - (png_uint_32)(alpha)) + \ + 32767) / 65535) +#endif /* PNG_READ_COMPOSITE_NODIV_SUPPORTED */ + +#ifdef PNG_READ_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(201, png_uint_32, png_get_uint_32, (png_const_bytep buf)); +PNG_EXPORT(202, png_uint_16, png_get_uint_16, (png_const_bytep buf)); +PNG_EXPORT(203, png_int_32, png_get_int_32, (png_const_bytep buf)); +#endif + +PNG_EXPORT(204, png_uint_32, png_get_uint_31, (png_structp png_ptr, + png_const_bytep buf)); +/* No png_get_int_16 -- may be added if there's a real need for it. */ + +/* Place a 32-bit number into a buffer in PNG byte order (big-endian). */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(205, void, png_save_uint_32, (png_bytep buf, png_uint_32 i)); +#endif +#ifdef PNG_SAVE_INT_32_SUPPORTED +PNG_EXPORT(206, void, png_save_int_32, (png_bytep buf, png_int_32 i)); +#endif + +/* Place a 16-bit number into a buffer in PNG byte order. + * The parameter is declared unsigned int, not png_uint_16, + * just to avoid potential problems on pre-ANSI C compilers. + */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(207, void, png_save_uint_16, (png_bytep buf, unsigned int i)); +/* No png_save_int_16 -- may be added if there's a real need for it. */ +#endif + +#ifdef PNG_USE_READ_MACROS +/* Inline macros to do direct reads of bytes from the input buffer. + * The png_get_int_32() routine assumes we are using two's complement + * format for negative values, which is almost certainly true. + */ +# define png_get_uint_32(buf) \ + (((png_uint_32)(*(buf)) << 24) + \ + ((png_uint_32)(*((buf) + 1)) << 16) + \ + ((png_uint_32)(*((buf) + 2)) << 8) + \ + ((png_uint_32)(*((buf) + 3)))) + + /* From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the + * function) incorrectly returned a value of type png_uint_32. + */ +# define png_get_uint_16(buf) \ + ((png_uint_16) \ + (((unsigned int)(*(buf)) << 8) + \ + ((unsigned int)(*((buf) + 1))))) + +# define png_get_int_32(buf) \ + ((png_int_32)((*(buf) & 0x80) \ + ? -((png_int_32)((png_get_uint_32(buf) ^ 0xffffffffL) + 1)) \ + : (png_int_32)png_get_uint_32(buf))) +#endif + +#if defined(PNG_READ_CHECK_FOR_INVALID_INDEX_SUPPORTED) || \ + defined(PNG_WRITE_CHECK_FOR_INVALID_INDEX_SUPPORTED) +PNG_EXPORT(234, void, png_set_check_for_invalid_index, (png_structp png_ptr, + int allowed)); +#endif + +/* Maintainer: Put new public prototypes here ^, in libpng.3, and project + * defs + */ + +/* The last ordinal number (this is the *last* one already used; the next + * one to use is one more than this.) Maintainer, remember to add an entry to + * scripts/symbols.def as well. + */ +#ifdef PNG_EXPORT_LAST_ORDINAL + PNG_EXPORT_LAST_ORDINAL(234); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* PNG_VERSION_INFO_ONLY */ +/* Do not put anything past this line */ +#endif /* PNG_H */ diff -r 49ab679cb384 -r 00696c1450da misc/winutils/include/pngconf.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/misc/winutils/include/pngconf.h Wed Oct 24 13:21:18 2012 +0100 @@ -0,0 +1,598 @@ + +/* pngconf.h - machine configurable file for libpng + * + * libpng version 1.5.13 - September 27, 2012 + * + * Copyright (c) 1998-2012 Glenn Randers-Pehrson + * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) + * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + */ + +/* Any machine specific code is near the front of this file, so if you + * are configuring libpng for a machine, you may want to read the section + * starting here down to where it starts to typedef png_color, png_text, + * and png_info. + */ + +#ifndef PNGCONF_H +#define PNGCONF_H + +#ifndef PNG_BUILDING_SYMBOL_TABLE +/* PNG_NO_LIMITS_H may be used to turn off the use of the standard C + * definition file for machine specific limits, this may impact the + * correctness of the definitions below (see uses of INT_MAX). + */ +# ifndef PNG_NO_LIMITS_H +# include +# endif + +/* For the memory copy APIs (i.e. the standard definitions of these), + * because this file defines png_memcpy and so on the base APIs must + * be defined here. + */ +# ifdef BSD +# include +# else +# include +# endif + +/* For png_FILE_p - this provides the standard definition of a + * FILE + */ +# ifdef PNG_STDIO_SUPPORTED +# include +# endif +#endif + +/* This controls optimization of the reading of 16 and 32 bit values + * from PNG files. It can be set on a per-app-file basis - it + * just changes whether a macro is used when the function is called. + * The library builder sets the default; if read functions are not + * built into the library the macro implementation is forced on. + */ +#ifndef PNG_READ_INT_FUNCTIONS_SUPPORTED +# define PNG_USE_READ_MACROS +#endif +#if !defined(PNG_NO_USE_READ_MACROS) && !defined(PNG_USE_READ_MACROS) +# if PNG_DEFAULT_READ_MACROS +# define PNG_USE_READ_MACROS +# endif +#endif + +/* COMPILER SPECIFIC OPTIONS. + * + * These options are provided so that a variety of difficult compilers + * can be used. Some are fixed at build time (e.g. PNG_API_RULE + * below) but still have compiler specific implementations, others + * may be changed on a per-file basis when compiling against libpng. + */ + +/* The PNGARG macro protects us against machines that don't have function + * prototypes (ie K&R style headers). If your compiler does not handle + * function prototypes, define this macro and use the included ansi2knr. + * I've always been able to use _NO_PROTO as the indicator, but you may + * need to drag the empty declaration out in front of here, or change the + * ifdef to suit your own needs. + */ +#ifndef PNGARG + +# ifdef OF /* zlib prototype munger */ +# define PNGARG(arglist) OF(arglist) +# else + +# ifdef _NO_PROTO +# define PNGARG(arglist) () +# else +# define PNGARG(arglist) arglist +# endif /* _NO_PROTO */ + +# endif /* OF */ + +#endif /* PNGARG */ + +/* Function calling conventions. + * ============================= + * Normally it is not necessary to specify to the compiler how to call + * a function - it just does it - however on x86 systems derived from + * Microsoft and Borland C compilers ('IBM PC', 'DOS', 'Windows' systems + * and some others) there are multiple ways to call a function and the + * default can be changed on the compiler command line. For this reason + * libpng specifies the calling convention of every exported function and + * every function called via a user supplied function pointer. This is + * done in this file by defining the following macros: + * + * PNGAPI Calling convention for exported functions. + * PNGCBAPI Calling convention for user provided (callback) functions. + * PNGCAPI Calling convention used by the ANSI-C library (required + * for longjmp callbacks and sometimes used internally to + * specify the calling convention for zlib). + * + * These macros should never be overridden. If it is necessary to + * change calling convention in a private build this can be done + * by setting PNG_API_RULE (which defaults to 0) to one of the values + * below to select the correct 'API' variants. + * + * PNG_API_RULE=0 Use PNGCAPI - the 'C' calling convention - throughout. + * This is correct in every known environment. + * PNG_API_RULE=1 Use the operating system convention for PNGAPI and + * the 'C' calling convention (from PNGCAPI) for + * callbacks (PNGCBAPI). This is no longer required + * in any known environment - if it has to be used + * please post an explanation of the problem to the + * libpng mailing list. + * + * These cases only differ if the operating system does not use the C + * calling convention, at present this just means the above cases + * (x86 DOS/Windows sytems) and, even then, this does not apply to + * Cygwin running on those systems. + * + * Note that the value must be defined in pnglibconf.h so that what + * the application uses to call the library matches the conventions + * set when building the library. + */ + +/* Symbol export + * ============= + * When building a shared library it is almost always necessary to tell + * the compiler which symbols to export. The png.h macro 'PNG_EXPORT' + * is used to mark the symbols. On some systems these symbols can be + * extracted at link time and need no special processing by the compiler, + * on other systems the symbols are flagged by the compiler and just + * the declaration requires a special tag applied (unfortunately) in a + * compiler dependent way. Some systems can do either. + * + * A small number of older systems also require a symbol from a DLL to + * be flagged to the program that calls it. This is a problem because + * we do not know in the header file included by application code that + * the symbol will come from a shared library, as opposed to a statically + * linked one. For this reason the application must tell us by setting + * the magic flag PNG_USE_DLL to turn on the special processing before + * it includes png.h. + * + * Four additional macros are used to make this happen: + * + * PNG_IMPEXP The magic (if any) to cause a symbol to be exported from + * the build or imported if PNG_USE_DLL is set - compiler + * and system specific. + * + * PNG_EXPORT_TYPE(type) A macro that pre or appends PNG_IMPEXP to + * 'type', compiler specific. + * + * PNG_DLL_EXPORT Set to the magic to use during a libpng build to + * make a symbol exported from the DLL. Not used in the + * public header files; see pngpriv.h for how it is used + * in the libpng build. + * + * PNG_DLL_IMPORT Set to the magic to force the libpng symbols to come + * from a DLL - used to define PNG_IMPEXP when + * PNG_USE_DLL is set. + */ + +/* System specific discovery. + * ========================== + * This code is used at build time to find PNG_IMPEXP, the API settings + * and PNG_EXPORT_TYPE(), it may also set a macro to indicate the DLL + * import processing is possible. On Windows/x86 systems it also sets + * compiler-specific macros to the values required to change the calling + * conventions of the various functions. + */ +#if ( defined(_Windows) || defined(_WINDOWS) || defined(WIN32) ||\ + defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) ) &&\ + ( defined(_X86_) || defined(_X64_) || defined(_M_IX86) ||\ + defined(_M_X64) || defined(_M_IA64) ) + /* Windows system (DOS doesn't support DLLs) running on x86/x64. Includes + * builds under Cygwin or MinGW. Also includes Watcom builds but these need + * special treatment because they are not compatible with GCC or Visual C + * because of different calling conventions. + */ +# if PNG_API_RULE == 2 + /* If this line results in an error, either because __watcall is not + * understood or because of a redefine just below you cannot use *this* + * build of the library with the compiler you are using. *This* build was + * build using Watcom and applications must also be built using Watcom! + */ +# define PNGCAPI __watcall +# endif + +# if defined(__GNUC__) || (defined (_MSC_VER) && (_MSC_VER >= 800)) +# define PNGCAPI __cdecl +# if PNG_API_RULE == 1 +# define PNGAPI __stdcall +# endif +# else + /* An older compiler, or one not detected (erroneously) above, + * if necessary override on the command line to get the correct + * variants for the compiler. + */ +# ifndef PNGCAPI +# define PNGCAPI _cdecl +# endif +# if PNG_API_RULE == 1 && !defined(PNGAPI) +# define PNGAPI _stdcall +# endif +# endif /* compiler/api */ + /* NOTE: PNGCBAPI always defaults to PNGCAPI. */ + +# if defined(PNGAPI) && !defined(PNG_USER_PRIVATEBUILD) + ERROR: PNG_USER_PRIVATEBUILD must be defined if PNGAPI is changed +# endif + +# if (defined(_MSC_VER) && _MSC_VER < 800) ||\ + (defined(__BORLANDC__) && __BORLANDC__ < 0x500) + /* older Borland and MSC + * compilers used '__export' and required this to be after + * the type. + */ +# ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) type PNG_IMPEXP +# endif +# define PNG_DLL_EXPORT __export +# else /* newer compiler */ +# define PNG_DLL_EXPORT __declspec(dllexport) +# ifndef PNG_DLL_IMPORT +# define PNG_DLL_IMPORT __declspec(dllimport) +# endif +# endif /* compiler */ + +#else /* !Windows/x86 */ +# if (defined(__IBMC__) || defined(__IBMCPP__)) && defined(__OS2__) +# define PNGAPI _System +# else /* !Windows/x86 && !OS/2 */ + /* Use the defaults, or define PNG*API on the command line (but + * this will have to be done for every compile!) + */ +# endif /* other system, !OS/2 */ +#endif /* !Windows/x86 */ + +/* Now do all the defaulting . */ +#ifndef PNGCAPI +# define PNGCAPI +#endif +#ifndef PNGCBAPI +# define PNGCBAPI PNGCAPI +#endif +#ifndef PNGAPI +# define PNGAPI PNGCAPI +#endif + +/* PNG_IMPEXP may be set on the compilation system command line or (if not set) + * then in an internal header file when building the library, otherwise (when + * using the library) it is set here. + */ +#ifndef PNG_IMPEXP +# if defined(PNG_USE_DLL) && defined(PNG_DLL_IMPORT) + /* This forces use of a DLL, disallowing static linking */ +# define PNG_IMPEXP PNG_DLL_IMPORT +# endif + +# ifndef PNG_IMPEXP +# define PNG_IMPEXP +# endif +#endif + +/* In 1.5.2 the definition of PNG_FUNCTION has been changed to always treat + * 'attributes' as a storage class - the attributes go at the start of the + * function definition, and attributes are always appended regardless of the + * compiler. This considerably simplifies these macros but may cause problems + * if any compilers both need function attributes and fail to handle them as + * a storage class (this is unlikely.) + */ +#ifndef PNG_FUNCTION +# define PNG_FUNCTION(type, name, args, attributes) attributes type name args +#endif + +#ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) PNG_IMPEXP type +#endif + + /* The ordinal value is only relevant when preprocessing png.h for symbol + * table entries, so we discard it here. See the .dfn files in the + * scripts directory. + */ +#ifndef PNG_EXPORTA + +# define PNG_EXPORTA(ordinal, type, name, args, attributes)\ + PNG_FUNCTION(PNG_EXPORT_TYPE(type),(PNGAPI name),PNGARG(args), \ + extern attributes) +#endif + +/* ANSI-C (C90) does not permit a macro to be invoked with an empty argument, + * so make something non-empty to satisfy the requirement: + */ +#define PNG_EMPTY /*empty list*/ + +#define PNG_EXPORT(ordinal, type, name, args)\ + PNG_EXPORTA(ordinal, type, name, args, PNG_EMPTY) + +/* Use PNG_REMOVED to comment out a removed interface. */ +#ifndef PNG_REMOVED +# define PNG_REMOVED(ordinal, type, name, args, attributes) +#endif + +#ifndef PNG_CALLBACK +# define PNG_CALLBACK(type, name, args) type (PNGCBAPI name) PNGARG(args) +#endif + +/* Support for compiler specific function attributes. These are used + * so that where compiler support is available incorrect use of API + * functions in png.h will generate compiler warnings. + * + * Added at libpng-1.2.41. + */ + +#ifndef PNG_NO_PEDANTIC_WARNINGS +# ifndef PNG_PEDANTIC_WARNINGS_SUPPORTED +# define PNG_PEDANTIC_WARNINGS_SUPPORTED +# endif +#endif + +#ifdef PNG_PEDANTIC_WARNINGS_SUPPORTED + /* Support for compiler specific function attributes. These are used + * so that where compiler support is available incorrect use of API + * functions in png.h will generate compiler warnings. Added at libpng + * version 1.2.41. + */ +# if defined(__GNUC__) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT __attribute__((__warn_unused_result__)) +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __attribute__((__noreturn__)) +# endif +# if __GNUC__ >= 3 +# ifndef PNG_ALLOCATED +# define PNG_ALLOCATED __attribute__((__malloc__)) +# endif +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __attribute__((__deprecated__)) +# endif +# ifndef PNG_PRIVATE +# if 0 /* Doesn't work so we use deprecated instead*/ +# define PNG_PRIVATE \ + __attribute__((warning("This function is not exported by libpng."))) +# else +# define PNG_PRIVATE \ + __attribute__((__deprecated__)) +# endif +# endif +# endif /* __GNUC__ >= 3 */ +# endif /* __GNUC__ */ + +# if defined(_MSC_VER) && (_MSC_VER >= 1300) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* not supported */ +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __declspec(noreturn) +# endif +# ifndef PNG_ALLOCATED +# if (_MSC_VER >= 1400) +# define PNG_ALLOCATED __declspec(restrict) +# endif +# endif +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __declspec(deprecated) +# endif +# ifndef PNG_PRIVATE +# define PNG_PRIVATE __declspec(deprecated) +# endif +# endif /* _MSC_VER */ +#endif /* PNG_PEDANTIC_WARNINGS */ + +#ifndef PNG_DEPRECATED +# define PNG_DEPRECATED /* Use of this function is deprecated */ +#endif +#ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* The result of this function must be checked */ +#endif +#ifndef PNG_NORETURN +# define PNG_NORETURN /* This function does not return */ +#endif +#ifndef PNG_ALLOCATED +# define PNG_ALLOCATED /* The result of the function is new memory */ +#endif +#ifndef PNG_PRIVATE +# define PNG_PRIVATE /* This is a private libpng function */ +#endif +#ifndef PNG_FP_EXPORT /* A floating point API. */ +# ifdef PNG_FLOATING_POINT_SUPPORTED +# define PNG_FP_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args); +# else /* No floating point APIs */ +# define PNG_FP_EXPORT(ordinal, type, name, args) +# endif +#endif +#ifndef PNG_FIXED_EXPORT /* A fixed point API. */ +# ifdef PNG_FIXED_POINT_SUPPORTED +# define PNG_FIXED_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args); +# else /* No fixed point APIs */ +# define PNG_FIXED_EXPORT(ordinal, type, name, args) +# endif +#endif + +/* The following uses const char * instead of char * for error + * and warning message functions, so some compilers won't complain. + * If you do not want to use const, define PNG_NO_CONST here. + * + * This should not change how the APIs are called, so it can be done + * on a per-file basis in the application. + */ +#ifndef PNG_CONST +# ifndef PNG_NO_CONST +# define PNG_CONST const +# else +# define PNG_CONST +# endif +#endif + +/* Some typedefs to get us started. These should be safe on most of the + * common platforms. The typedefs should be at least as large as the + * numbers suggest (a png_uint_32 must be at least 32 bits long), but they + * don't have to be exactly that size. Some compilers dislike passing + * unsigned shorts as function parameters, so you may be better off using + * unsigned int for png_uint_16. + */ + +#if defined(INT_MAX) && (INT_MAX > 0x7ffffffeL) +typedef unsigned int png_uint_32; +typedef int png_int_32; +#else +typedef unsigned long png_uint_32; +typedef long png_int_32; +#endif +typedef unsigned short png_uint_16; +typedef short png_int_16; +typedef unsigned char png_byte; + +#ifdef PNG_NO_SIZE_T +typedef unsigned int png_size_t; +#else +typedef size_t png_size_t; +#endif +#define png_sizeof(x) (sizeof (x)) + +/* The following is needed for medium model support. It cannot be in the + * pngpriv.h header. Needs modification for other compilers besides + * MSC. Model independent support declares all arrays and pointers to be + * large using the far keyword. The zlib version used must also support + * model independent data. As of version zlib 1.0.4, the necessary changes + * have been made in zlib. The USE_FAR_KEYWORD define triggers other + * changes that are needed. (Tim Wegner) + */ + +/* Separate compiler dependencies (problem here is that zlib.h always + * defines FAR. (SJT) + */ +#ifdef __BORLANDC__ +# if defined(__LARGE__) || defined(__HUGE__) || defined(__COMPACT__) +# define LDATA 1 +# else +# define LDATA 0 +# endif + /* GRR: why is Cygwin in here? Cygwin is not Borland C... */ +# if !defined(__WIN32__) && !defined(__FLAT__) && !defined(__CYGWIN__) +# define PNG_MAX_MALLOC_64K /* only used in build */ +# if (LDATA != 1) +# ifndef FAR +# define FAR __far +# endif +# define USE_FAR_KEYWORD +# endif /* LDATA != 1 */ + /* Possibly useful for moving data out of default segment. + * Uncomment it if you want. Could also define FARDATA as + * const if your compiler supports it. (SJT) +# define FARDATA FAR + */ +# endif /* __WIN32__, __FLAT__, __CYGWIN__ */ +#endif /* __BORLANDC__ */ + + +/* Suggest testing for specific compiler first before testing for + * FAR. The Watcom compiler defines both __MEDIUM__ and M_I86MM, + * making reliance oncertain keywords suspect. (SJT) + */ + +/* MSC Medium model */ +#ifdef FAR +# ifdef M_I86MM +# define USE_FAR_KEYWORD +# define FARDATA FAR +# include +# endif +#endif + +/* SJT: default case */ +#ifndef FAR +# define FAR +#endif + +/* At this point FAR is always defined */ +#ifndef FARDATA +# define FARDATA +#endif + +/* Typedef for floating-point numbers that are converted + * to fixed-point with a multiple of 100,000, e.g., gamma + */ +typedef png_int_32 png_fixed_point; + +/* Add typedefs for pointers */ +typedef void FAR * png_voidp; +typedef PNG_CONST void FAR * png_const_voidp; +typedef png_byte FAR * png_bytep; +typedef PNG_CONST png_byte FAR * png_const_bytep; +typedef png_uint_32 FAR * png_uint_32p; +typedef PNG_CONST png_uint_32 FAR * png_const_uint_32p; +typedef png_int_32 FAR * png_int_32p; +typedef PNG_CONST png_int_32 FAR * png_const_int_32p; +typedef png_uint_16 FAR * png_uint_16p; +typedef PNG_CONST png_uint_16 FAR * png_const_uint_16p; +typedef png_int_16 FAR * png_int_16p; +typedef PNG_CONST png_int_16 FAR * png_const_int_16p; +typedef char FAR * png_charp; +typedef PNG_CONST char FAR * png_const_charp; +typedef png_fixed_point FAR * png_fixed_point_p; +typedef PNG_CONST png_fixed_point FAR * png_const_fixed_point_p; +typedef png_size_t FAR * png_size_tp; +typedef PNG_CONST png_size_t FAR * png_const_size_tp; + +#ifdef PNG_STDIO_SUPPORTED +typedef FILE * png_FILE_p; +#endif + +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double FAR * png_doublep; +typedef PNG_CONST double FAR * png_const_doublep; +#endif + +/* Pointers to pointers; i.e. arrays */ +typedef png_byte FAR * FAR * png_bytepp; +typedef png_uint_32 FAR * FAR * png_uint_32pp; +typedef png_int_32 FAR * FAR * png_int_32pp; +typedef png_uint_16 FAR * FAR * png_uint_16pp; +typedef png_int_16 FAR * FAR * png_int_16pp; +typedef PNG_CONST char FAR * FAR * png_const_charpp; +typedef char FAR * FAR * png_charpp; +typedef png_fixed_point FAR * FAR * png_fixed_point_pp; +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double FAR * FAR * png_doublepp; +#endif + +/* Pointers to pointers to pointers; i.e., pointer to array */ +typedef char FAR * FAR * FAR * png_charppp; + +/* png_alloc_size_t is guaranteed to be no smaller than png_size_t, + * and no smaller than png_uint_32. Casts from png_size_t or png_uint_32 + * to png_alloc_size_t are not necessary; in fact, it is recommended + * not to use them at all so that the compiler can complain when something + * turns out to be problematic. + * Casts in the other direction (from png_alloc_size_t to png_size_t or + * png_uint_32) should be explicitly applied; however, we do not expect + * to encounter practical situations that require such conversions. + */ +#if defined(__TURBOC__) && !defined(__FLAT__) + typedef unsigned long png_alloc_size_t; +#else +# if defined(_MSC_VER) && defined(MAXSEG_64K) + typedef unsigned long png_alloc_size_t; +# else + /* This is an attempt to detect an old Windows system where (int) is + * actually 16 bits, in that case png_malloc must have an argument with a + * bigger size to accomodate the requirements of the library. + */ +# if (defined(_Windows) || defined(_WINDOWS) || defined(_WINDOWS_)) && \ + (!defined(INT_MAX) || INT_MAX <= 0x7ffffffeL) + typedef DWORD png_alloc_size_t; +# else + typedef png_size_t png_alloc_size_t; +# endif +# endif +#endif + +#endif /* PNGCONF_H */ diff -r 49ab679cb384 -r 00696c1450da misc/winutils/include/zconf.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/misc/winutils/include/zconf.h Wed Oct 24 13:21:18 2012 +0100 @@ -0,0 +1,428 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2010 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + * Even better than compiling with -DZ_PREFIX would be to use configure to set + * this permanently in zconf.h using "./configure --zprefix". + */ +#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ + +/* all linked symbols */ +# define _dist_code z__dist_code +# define _length_code z__length_code +# define _tr_align z__tr_align +# define _tr_flush_block z__tr_flush_block +# define _tr_init z__tr_init +# define _tr_stored_block z__tr_stored_block +# define _tr_tally z__tr_tally +# define adler32 z_adler32 +# define adler32_combine z_adler32_combine +# define adler32_combine64 z_adler32_combine64 +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# define crc32 z_crc32 +# define crc32_combine z_crc32_combine +# define crc32_combine64 z_crc32_combine64 +# define deflate z_deflate +# define deflateBound z_deflateBound +# define deflateCopy z_deflateCopy +# define deflateEnd z_deflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateInit_ z_deflateInit_ +# define deflateParams z_deflateParams +# define deflatePrime z_deflatePrime +# define deflateReset z_deflateReset +# define deflateSetDictionary z_deflateSetDictionary +# define deflateSetHeader z_deflateSetHeader +# define deflateTune z_deflateTune +# define deflate_copyright z_deflate_copyright +# define get_crc_table z_get_crc_table +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzgetc z_gzgetc +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# define gzprintf z_gzprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzwrite z_gzwrite +# define inflate z_inflate +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define inflateBackInit_ z_inflateBackInit_ +# define inflateCopy z_inflateCopy +# define inflateEnd z_inflateEnd +# define inflateGetHeader z_inflateGetHeader +# define inflateInit2_ z_inflateInit2_ +# define inflateInit_ z_inflateInit_ +# define inflateMark z_inflateMark +# define inflatePrime z_inflatePrime +# define inflateReset z_inflateReset +# define inflateReset2 z_inflateReset2 +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateUndermine z_inflateUndermine +# define inflate_copyright z_inflate_copyright +# define inflate_fast z_inflate_fast +# define inflate_table z_inflate_table +# define uncompress z_uncompress +# define zError z_zError +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# define zlibCompileFlags z_zlibCompileFlags +# define zlibVersion z_zlibVersion + +/* all zlib typedefs in zlib.h and zconf.h */ +# define Byte z_Byte +# define Bytef z_Bytef +# define alloc_func z_alloc_func +# define charf z_charf +# define free_func z_free_func +# define gzFile z_gzFile +# define gz_header z_gz_header +# define gz_headerp z_gz_headerp +# define in_func z_in_func +# define intf z_intf +# define out_func z_out_func +# define uInt z_uInt +# define uIntf z_uIntf +# define uLong z_uLong +# define uLongf z_uLongf +# define voidp z_voidp +# define voidpc z_voidpc +# define voidpf z_voidpf + +/* all zlib structs in zlib.h and zconf.h */ +# define gz_header_s z_gz_header_s +# define internal_state z_internal_state + +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_UNISTD_H +#endif + +#ifdef STDC +# include /* for off_t */ +#endif + +/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and + * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even + * though the former does not conform to the LFS document), but considering + * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as + * equivalently requesting no 64-bit operations + */ +#if -_LARGEFILE64_SOURCE - -1 == 1 +# undef _LARGEFILE64_SOURCE +#endif + +#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) +# include /* for SEEK_* and off_t */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif +#endif + +#ifndef SEEK_SET +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#ifndef z_off_t +# define z_off_t long +#endif + +#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 +# define z_off64_t off64_t +#else +# define z_off64_t z_off_t +#endif + +#if defined(__OS400__) +# define NO_vsnprintf +#endif + +#if defined(__MVS__) +# define NO_vsnprintf +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) + #pragma map(deflateInit_,"DEIN") + #pragma map(deflateInit2_,"DEIN2") + #pragma map(deflateEnd,"DEEND") + #pragma map(deflateBound,"DEBND") + #pragma map(inflateInit_,"ININ") + #pragma map(inflateInit2_,"ININ2") + #pragma map(inflateEnd,"INEND") + #pragma map(inflateSync,"INSY") + #pragma map(inflateSetDictionary,"INSEDI") + #pragma map(compressBound,"CMBND") + #pragma map(inflate_table,"INTABL") + #pragma map(inflate_fast,"INFA") + #pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff -r 49ab679cb384 -r 00696c1450da misc/winutils/include/zlib.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/misc/winutils/include/zlib.h Wed Oct 24 13:21:18 2012 +0100 @@ -0,0 +1,1613 @@ +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.2.5, April 19th, 2010 + + Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt + (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). +*/ + +#ifndef ZLIB_H +#define ZLIB_H + +#include "zconf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ZLIB_VERSION "1.2.5" +#define ZLIB_VERNUM 0x1250 +#define ZLIB_VER_MAJOR 1 +#define ZLIB_VER_MINOR 2 +#define ZLIB_VER_REVISION 5 +#define ZLIB_VER_SUBREVISION 0 + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed data. + This version of the library supports only one compression method (deflation) + but other algorithms will be added later and will have the same stream + interface. + + Compression can be done in a single step if the buffers are large enough, + or can be done by repeated calls of the compression function. In the latter + case, the application must provide more input and/or consume the output + (providing more output space) before each call. + + The compressed data format used by default by the in-memory functions is + the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped + around a deflate stream, which is itself documented in RFC 1951. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio using the functions that start + with "gz". The gzip format is different from the zlib format. gzip is a + gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. + + This library can optionally read and write gzip streams in memory as well. + + The zlib format was designed to be compact and fast for use in memory + and on communications channels. The gzip format was designed for single- + file compression on file systems, has a larger header than zlib to maintain + directory information, and uses a different, slower check method than zlib. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never crash + even in case of corrupted input. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address)); + +struct internal_state; + +typedef struct z_stream_s { + Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total nb of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total nb of bytes output so far */ + + char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: binary or text */ + uLong adler; /* adler32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream FAR *z_streamp; + +/* + gzip header information passed to and from zlib routines. See RFC 1952 + for more details on the meanings of these fields. +*/ +typedef struct gz_header_s { + int text; /* true if compressed data believed to be text */ + uLong time; /* modification time */ + int xflags; /* extra flags (not used when writing a gzip file) */ + int os; /* operating system */ + Bytef *extra; /* pointer to extra field or Z_NULL if none */ + uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ + uInt extra_max; /* space at extra (only when reading header) */ + Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ + uInt name_max; /* space at name (only when reading header) */ + Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ + uInt comm_max; /* space at comment (only when reading header) */ + int hcrc; /* true if there was or will be a header crc */ + int done; /* true when done reading gzip header (not used + when writing a gzip file) */ +} gz_header; + +typedef gz_header FAR *gz_headerp; + +/* + The application must update next_in and avail_in when avail_in has dropped + to zero. It must update next_out and avail_out when avail_out has dropped + to zero. The application must initialize zalloc, zfree and opaque before + calling the init function. All other fields are set by the compression + library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this if + the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers + returned by zalloc for objects of exactly 65536 bytes *must* have their + offset normalized to zero. The default allocation function provided by this + library ensures this (see zutil.c). To reduce memory requirements and avoid + any allocation of 64K objects, at the expense of compression ratio, compile + the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or progress + reports. After compression, total_in holds the total size of the + uncompressed data and may be saved for use in the decompressor (particularly + if the decompressor wants to decompress everything in a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +#define Z_BLOCK 5 +#define Z_TREES 6 +/* Allowed flush values; see deflate() and inflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative values + * are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_RLE 3 +#define Z_FIXED 4 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_TEXT 1 +#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ +#define Z_UNKNOWN 2 +/* Possible values of the data_type field (though see inflate()) */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + + /* basic functions */ + +ZEXTERN const char * ZEXPORT zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is not + compatible with the zlib.h header file used by the application. This check + is automatically made by deflateInit and inflateInit. + */ + +/* +ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. If + zalloc and zfree are set to Z_NULL, deflateInit updates them to use default + allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at all + (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION + requests a default compromise between speed and compression (currently + equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if level is not a valid compression level, or + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). msg is set to null + if there is no error message. deflateInit does not perform any compression: + this will be done by deflate(). +*/ + + +ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). Some + output may be provided even if flush is not set. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming more + output, and updating avail_in or avail_out accordingly; avail_out should + never be zero before the call. The application can consume the compressed + output when it wants, for example when the output buffer is full (avail_out + == 0), or after each call of deflate(). If deflate returns Z_OK and with + zero avail_out, it must be called again after making room in the output + buffer because there might be more output pending. + + Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to + decide how much data to accumulate before producing output, in order to + maximize compression. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In + particular avail_in is zero after the call if enough output space has been + provided before the call.) Flushing may degrade compression for some + compression algorithms and so it should be used only when necessary. This + completes the current deflate block and follows it with an empty stored block + that is three bits plus filler bits to the next byte, followed by four bytes + (00 00 ff ff). + + If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the + output buffer, but the output is not aligned to a byte boundary. All of the + input data so far will be available to the decompressor, as for Z_SYNC_FLUSH. + This completes the current deflate block and follows it with an empty fixed + codes block that is 10 bits long. This assures that enough bytes are output + in order for the decompressor to finish the block before the empty fixed code + block. + + If flush is set to Z_BLOCK, a deflate block is completed and emitted, as + for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to + seven bits of the current block are held to be written as the next byte after + the next deflate block is completed. In this case, the decompressor may not + be provided enough bits at this point in order to complete decompression of + the data provided so far to the compressor. It may need to wait for the next + block to be emitted. This is for advanced applications that need to control + the emission of deflate blocks. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that + avail_out is greater than six to avoid repeated flush markers due to + avail_out == 0 on return. + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there was + enough output space; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the stream + are deflateReset or deflateEnd. + + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least the + value returned by deflateBound (see below). If deflate does not return + Z_STREAM_END, then it must be called again as described above. + + deflate() sets strm->adler to the adler32 checksum of all input read + so far (that is, total_in bytes). + + deflate() may update strm->data_type if it can make a good guess about + the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered + binary. This field is only for information purposes and does not affect the + compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible + (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not + fatal, and deflate() can be called again with more input and more output + space to continue compressing. +*/ + + +ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any pending + output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, msg + may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. If next_in is not Z_NULL and avail_in is large enough (the + exact value depends on the compression method), inflateInit determines the + compression method from the zlib header and allocates all data structures + accordingly; otherwise the allocation will be deferred to the first call of + inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to + use default allocation functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller, or Z_STREAM_ERROR if the parameters are + invalid, such as a null pointer to the structure. msg is set to null if + there is no error message. inflateInit does not perform any decompression + apart from possibly reading the zlib header if present: actual decompression + will be done by inflate(). (So next_in and avail_in may be modified, but + next_out and avail_out are unused and unchanged.) The current implementation + of inflateInit() does not process any header information -- that is deferred + until inflate() is called. +*/ + + +ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing will + resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there is + no more input data or no more space in the output buffer (see below about + the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming more + output, and updating the next_* and avail_* values accordingly. The + application can consume the uncompressed output when it wants, for example + when the output buffer is full (avail_out == 0), or after each call of + inflate(). If inflate returns Z_OK and with zero avail_out, it must be + called again after making room in the output buffer because there might be + more output pending. + + The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH, + Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much + output as possible to the output buffer. Z_BLOCK requests that inflate() + stop if and when it gets to the next deflate block boundary. When decoding + the zlib or gzip format, this will cause inflate() to return immediately + after the header and before the first block. When doing a raw inflate, + inflate() will go ahead and process the first block, and will return when it + gets to the end of that block, or when it runs out of data. + + The Z_BLOCK option assists in appending to or combining deflate streams. + Also to assist in this, on return inflate() will set strm->data_type to the + number of unused bits in the last byte taken from strm->next_in, plus 64 if + inflate() is currently decoding the last block in the deflate stream, plus + 128 if inflate() returned immediately after decoding an end-of-block code or + decoding the complete header up to just before the first byte of the deflate + stream. The end-of-block will not be indicated until all of the uncompressed + data from that block has been written to strm->next_out. The number of + unused bits may in general be greater than seven, except when bit 7 of + data_type is set, in which case the number of unused bits will be less than + eight. data_type is set as noted here every time inflate() returns for all + flush options, and so can be used to determine the amount of currently + consumed input in bits. + + The Z_TREES option behaves as Z_BLOCK does, but it also returns when the + end of each deflate block header is reached, before any actual data in that + block is decoded. This allows the caller to determine the length of the + deflate block header for later use in random access within a deflate block. + 256 is added to the value of strm->data_type when inflate() returns + immediately after reaching the end of the deflate block header. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step (a + single call of inflate), the parameter flush should be set to Z_FINISH. In + this case all pending input is processed and all pending output is flushed; + avail_out must be large enough to hold all the uncompressed data. (The size + of the uncompressed data may have been saved by the compressor for this + purpose.) The next operation on this stream must be inflateEnd to deallocate + the decompression state. The use of Z_FINISH is never required, but can be + used to inform inflate that a faster approach may be used for the single + inflate() call. + + In this implementation, inflate() always flushes as much output as + possible to the output buffer, and always uses the faster approach on the + first call. So the only effect of the flush parameter in this implementation + is on the return value of inflate(), as noted below, or when it returns early + because Z_BLOCK or Z_TREES is used. + + If a preset dictionary is needed after this call (see inflateSetDictionary + below), inflate sets strm->adler to the adler32 checksum of the dictionary + chosen by the compressor and returns Z_NEED_DICT; otherwise it sets + strm->adler to the adler32 checksum of all output produced so far (that is, + total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described + below. At the end of the stream, inflate() checks that its computed adler32 + checksum is equal to that saved by the compressor and returns Z_STREAM_END + only if the checksum is correct. + + inflate() can decompress and check either zlib-wrapped or gzip-wrapped + deflate data. The header type is detected automatically, if requested when + initializing with inflateInit2(). Any information contained in the gzip + header is not retained, so applications that need that information should + instead use raw inflate, see inflateInit2() below, or inflateBack() and + perform their own processing of the gzip header and trailer. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect check + value), Z_STREAM_ERROR if the stream structure was inconsistent (for example + next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory, + Z_BUF_ERROR if no progress is possible or if there was not enough room in the + output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and + inflate() can be called again with more input and more output space to + continue decompressing. If Z_DATA_ERROR is returned, the application may + then call inflateSync() to look for a good compression block if a partial + recovery of the data is desired. +*/ + + +ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any pending + output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); + + This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by the + caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + windowBits can also be -8..-15 for raw deflate. In this case, -windowBits + determines the window size. deflate() will then generate raw deflate data + with no zlib header or trailer, and will not compute an adler32 check value. + + windowBits can also be greater than 15 for optional gzip encoding. Add + 16 to windowBits to write a simple gzip header and trailer around the + compressed data instead of a zlib wrapper. The gzip header will have no + file name, no extra data, no comment, no modification time (set to zero), no + header crc, and the operating system will be set to 255 (unknown). If a + gzip stream is being written, strm->adler is a crc32 instead of an adler32. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but is + slow and reduces compression ratio; memLevel=9 uses maximum memory for + optimal speed. The default value is 8. See zconf.h for total memory usage + as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match), or Z_RLE to limit match distances to one (run-length + encoding). Filtered data consists mostly of small values with a somewhat + random distribution. In this case, the compression algorithm is tuned to + compress them better. The effect of Z_FILTERED is to force more Huffman + coding and less string matching; it is somewhat intermediate between + Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as + fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The + strategy parameter only affects the compression ratio but not the + correctness of the compressed output even if it is not set appropriately. + Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler + decoder for special applications. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid + method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is + incompatible with the version assumed by the caller (ZLIB_VERSION). msg is + set to null if there is no error message. deflateInit2 does not perform any + compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. This function must be called + immediately after deflateInit, deflateInit2 or deflateReset, before any call + of deflate. The compressor and decompressor must use exactly the same + dictionary (see inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size + provided in deflateInit or deflateInit2. Thus the strings most likely to be + useful should be put at the end of the dictionary, not at the front. In + addition, the current implementation of deflate will use at most the window + size minus 262 bytes of the provided dictionary. + + Upon return of this function, strm->adler is set to the adler32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The adler32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) If a raw deflate was requested, then the + adler32 value is not computed and strm->adler is not set. + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if the compression method is bsort). deflateSetDictionary does not + perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and can + consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being Z_NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. The + stream will keep the same compression level and any other attributes that + may have been set by deflateInit2. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL). +*/ + +ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, + int level, + int strategy)); +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2. This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different strategy. + If the compression level is changed, the input available so far is + compressed with the old level (and may be flushed); the new level will take + effect only at the next call of deflate(). + + Before the call of deflateParams, the stream state must be set as for + a call of deflate(), since the currently available input may have to be + compressed and flushed. In particular, strm->avail_out must be non-zero. + + deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source + stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if + strm->avail_out was zero. +*/ + +ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, + int good_length, + int max_lazy, + int nice_length, + int max_chain)); +/* + Fine tune deflate's internal compression parameters. This should only be + used by someone who understands the algorithm used by zlib's deflate for + searching for the best matching string, and even then only by the most + fanatic optimizer trying to squeeze out the last compressed bit for their + specific input data. Read the deflate.c source code for the meaning of the + max_lazy, good_length, nice_length, and max_chain parameters. + + deflateTune() can be called after deflateInit() or deflateInit2(), and + returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. + */ + +ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, + uLong sourceLen)); +/* + deflateBound() returns an upper bound on the compressed size after + deflation of sourceLen bytes. It must be called after deflateInit() or + deflateInit2(), and after deflateSetHeader(), if used. This would be used + to allocate an output buffer for deflation in a single pass, and so would be + called before deflate(). +*/ + +ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + deflatePrime() inserts bits in the deflate output stream. The intent + is that this function is used to start off the deflate output with the bits + leftover from a previous deflate stream when appending to it. As such, this + function can only be used for raw deflate, and must be used before the first + deflate() call after a deflateInit2() or deflateReset(). bits must be less + than or equal to 16, and that many of the least significant bits of value + will be inserted in the output. + + deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, + gz_headerp head)); +/* + deflateSetHeader() provides gzip header information for when a gzip + stream is requested by deflateInit2(). deflateSetHeader() may be called + after deflateInit2() or deflateReset() and before the first call of + deflate(). The text, time, os, extra field, name, and comment information + in the provided gz_header structure are written to the gzip header (xflag is + ignored -- the extra flags are set according to the compression level). The + caller must assure that, if not Z_NULL, name and comment are terminated with + a zero byte, and that if extra is not Z_NULL, that extra_len bytes are + available there. If hcrc is true, a gzip header crc is included. Note that + the current versions of the command-line version of gzip (up through version + 1.3.x) do not support header crc's, and will report that it is a "multi-part + gzip file" and give up. + + If deflateSetHeader is not used, the default gzip header has text false, + the time set to zero, and os set to 255, with no extra, name, or comment + fields. The gzip header is returned to the default state by deflateReset(). + + deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, + int windowBits)); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. windowBits must be greater than or equal to the windowBits value + provided to deflateInit2() while compressing, or it must be equal to 15 if + deflateInit2() was not used. If a compressed stream with a larger window + size is given as input, inflate() will return with the error code + Z_DATA_ERROR instead of trying to allocate a larger window. + + windowBits can also be zero to request that inflate use the window size in + the zlib header of the compressed stream. + + windowBits can also be -8..-15 for raw inflate. In this case, -windowBits + determines the window size. inflate() will then process raw deflate data, + not looking for a zlib or gzip header, not generating a check value, and not + looking for any check values for comparison at the end of the stream. This + is for use with other formats that use the deflate compressed data format + such as zip. Those formats provide their own check values. If a custom + format is developed using the raw deflate format for compressed data, it is + recommended that a check value such as an adler32 or a crc32 be applied to + the uncompressed data as is done in the zlib, gzip, and zip formats. For + most applications, the zlib format should be used as is. Note that comments + above on the use in deflateInit2() applies to the magnitude of windowBits. + + windowBits can also be greater than 15 for optional gzip decoding. Add + 32 to windowBits to enable zlib and gzip decoding with automatic header + detection, or add 16 to decode only the gzip format (the zlib format will + return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a + crc32 instead of an adler32. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller, or Z_STREAM_ERROR if the parameters are + invalid, such as a null pointer to the structure. msg is set to null if + there is no error message. inflateInit2 does not perform any decompression + apart from possibly reading the zlib header if present: actual decompression + will be done by inflate(). (So next_in and avail_in may be modified, but + next_out and avail_out are unused and unchanged.) The current implementation + of inflateInit2() does not process any header information -- that is + deferred until inflate() is called. +*/ + +ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate, + if that call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the adler32 value returned by that call of inflate. + The compressor and decompressor must use exactly the same dictionary (see + deflateSetDictionary). For raw inflate, this function can be called + immediately after inflateInit2() or inflateReset() and before any call of + inflate() to set the dictionary. The application must insure that the + dictionary that was used for compression is provided. + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect adler32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); +/* + Skips invalid compressed data until a full flush point (see above the + description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR + if no more input was provided, Z_DATA_ERROR if no flush point has been + found, or Z_STREAM_ERROR if the stream structure was inconsistent. In the + success case, the application may save the current current value of total_in + which indicates where valid compressed data was found. In the error case, + the application may repeatedly call inflateSync, providing more input each + time, until success or end of the input data. +*/ + +ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when randomly accessing a large stream. The + first pass through the stream can periodically record the inflate state, + allowing restarting inflate at those points when randomly accessing the + stream. + + inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being Z_NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. The + stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL). +*/ + +ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm, + int windowBits)); +/* + This function is the same as inflateReset, but it also permits changing + the wrap and window size requests. The windowBits parameter is interpreted + the same as it is for inflateInit2. + + inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL), or if + the windowBits parameter is invalid. +*/ + +ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + This function inserts bits in the inflate input stream. The intent is + that this function is used to start inflating at a bit position in the + middle of a byte. The provided bits will be used before any bytes are used + from next_in. This function should only be used with raw inflate, and + should be used before the first inflate() call after inflateInit2() or + inflateReset(). bits must be less than or equal to 16, and that many of the + least significant bits of value will be inserted in the input. + + If bits is negative, then the input stream bit buffer is emptied. Then + inflatePrime() can be called again to put bits in the buffer. This is used + to clear out bits leftover after feeding inflate a block description prior + to feeding inflate codes. + + inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm)); +/* + This function returns two values, one in the lower 16 bits of the return + value, and the other in the remaining upper bits, obtained by shifting the + return value down 16 bits. If the upper value is -1 and the lower value is + zero, then inflate() is currently decoding information outside of a block. + If the upper value is -1 and the lower value is non-zero, then inflate is in + the middle of a stored block, with the lower value equaling the number of + bytes from the input remaining to copy. If the upper value is not -1, then + it is the number of bits back from the current bit position in the input of + the code (literal or length/distance pair) currently being processed. In + that case the lower value is the number of bytes already emitted for that + code. + + A code is being processed if inflate is waiting for more input to complete + decoding of the code, or if it has completed decoding but is waiting for + more output space to write the literal or match data. + + inflateMark() is used to mark locations in the input data for random + access, which may be at bit positions, and to note those cases where the + output of a code may span boundaries of random access blocks. The current + location in the input stream can be determined from avail_in and data_type + as noted in the description for the Z_BLOCK flush parameter for inflate. + + inflateMark returns the value noted above or -1 << 16 if the provided + source stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, + gz_headerp head)); +/* + inflateGetHeader() requests that gzip header information be stored in the + provided gz_header structure. inflateGetHeader() may be called after + inflateInit2() or inflateReset(), and before the first call of inflate(). + As inflate() processes the gzip stream, head->done is zero until the header + is completed, at which time head->done is set to one. If a zlib stream is + being decoded, then head->done is set to -1 to indicate that there will be + no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be + used to force inflate() to return immediately after header processing is + complete and before any actual data is decompressed. + + The text, time, xflags, and os fields are filled in with the gzip header + contents. hcrc is set to true if there is a header CRC. (The header CRC + was valid if done is set to one.) If extra is not Z_NULL, then extra_max + contains the maximum number of bytes to write to extra. Once done is true, + extra_len contains the actual extra field length, and extra contains the + extra field, or that field truncated if extra_max is less than extra_len. + If name is not Z_NULL, then up to name_max characters are written there, + terminated with a zero unless the length is greater than name_max. If + comment is not Z_NULL, then up to comm_max characters are written there, + terminated with a zero unless the length is greater than comm_max. When any + of extra, name, or comment are not Z_NULL and the respective field is not + present in the header, then that field is set to Z_NULL to signal its + absence. This allows the use of deflateSetHeader() with the returned + structure to duplicate the header. However if those fields are set to + allocated memory, then the application will need to save those pointers + elsewhere so that they can be eventually freed. + + If inflateGetHeader is not used, then the header information is simply + discarded. The header is always checked for validity, including the header + CRC if present. inflateReset() will reset the process to discard the header + information. The application would need to call inflateGetHeader() again to + retrieve the header from the next gzip stream. + + inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, + unsigned char FAR *window)); + + Initialize the internal stream state for decompression using inflateBack() + calls. The fields zalloc, zfree and opaque in strm must be initialized + before the call. If zalloc and zfree are Z_NULL, then the default library- + derived memory allocation routines are used. windowBits is the base two + logarithm of the window size, in the range 8..15. window is a caller + supplied buffer of that size. Except for special applications where it is + assured that deflate was used with small window sizes, windowBits must be 15 + and a 32K byte window must be supplied to be able to decompress general + deflate streams. + + See inflateBack() for the usage of these routines. + + inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of + the paramaters are invalid, Z_MEM_ERROR if the internal state could not be + allocated, or Z_VERSION_ERROR if the version of the library does not match + the version of the header file. +*/ + +typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *)); +typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); + +ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, + in_func in, void FAR *in_desc, + out_func out, void FAR *out_desc)); +/* + inflateBack() does a raw inflate with a single call using a call-back + interface for input and output. This is more efficient than inflate() for + file i/o applications in that it avoids copying between the output and the + sliding window by simply making the window itself the output buffer. This + function trusts the application to not change the output buffer passed by + the output function, at least until inflateBack() returns. + + inflateBackInit() must be called first to allocate the internal state + and to initialize the state with the user-provided window buffer. + inflateBack() may then be used multiple times to inflate a complete, raw + deflate stream with each call. inflateBackEnd() is then called to free the + allocated state. + + A raw deflate stream is one with no zlib or gzip header or trailer. + This routine would normally be used in a utility that reads zip or gzip + files and writes out uncompressed files. The utility would decode the + header and process the trailer on its own, hence this routine expects only + the raw deflate stream to decompress. This is different from the normal + behavior of inflate(), which expects either a zlib or gzip header and + trailer around the deflate stream. + + inflateBack() uses two subroutines supplied by the caller that are then + called by inflateBack() for input and output. inflateBack() calls those + routines until it reads a complete deflate stream and writes out all of the + uncompressed data, or until it encounters an error. The function's + parameters and return types are defined above in the in_func and out_func + typedefs. inflateBack() will call in(in_desc, &buf) which should return the + number of bytes of provided input, and a pointer to that input in buf. If + there is no input available, in() must return zero--buf is ignored in that + case--and inflateBack() will return a buffer error. inflateBack() will call + out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out() + should return zero on success, or non-zero on failure. If out() returns + non-zero, inflateBack() will return with an error. Neither in() nor out() + are permitted to change the contents of the window provided to + inflateBackInit(), which is also the buffer that out() uses to write from. + The length written by out() will be at most the window size. Any non-zero + amount of input may be provided by in(). + + For convenience, inflateBack() can be provided input on the first call by + setting strm->next_in and strm->avail_in. If that input is exhausted, then + in() will be called. Therefore strm->next_in must be initialized before + calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called + immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in + must also be initialized, and then if strm->avail_in is not zero, input will + initially be taken from strm->next_in[0 .. strm->avail_in - 1]. + + The in_desc and out_desc parameters of inflateBack() is passed as the + first parameter of in() and out() respectively when they are called. These + descriptors can be optionally used to pass any information that the caller- + supplied in() and out() functions need to do their job. + + On return, inflateBack() will set strm->next_in and strm->avail_in to + pass back any unused input that was provided by the last in() call. The + return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR + if in() or out() returned an error, Z_DATA_ERROR if there was a format error + in the deflate stream (in which case strm->msg is set to indicate the nature + of the error), or Z_STREAM_ERROR if the stream was not properly initialized. + In the case of Z_BUF_ERROR, an input or output error can be distinguished + using strm->next_in which will be Z_NULL only if in() returned an error. If + strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning + non-zero. (in() will always be called before out(), so strm->next_in is + assured to be defined if out() returns non-zero.) Note that inflateBack() + cannot return Z_OK. +*/ + +ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); +/* + All memory allocated by inflateBackInit() is freed. + + inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream + state was inconsistent. +*/ + +ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); +/* Return flags indicating compile-time options. + + Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: + 1.0: size of uInt + 3.2: size of uLong + 5.4: size of voidpf (pointer) + 7.6: size of z_off_t + + Compiler, assembler, and debug options: + 8: DEBUG + 9: ASMV or ASMINF -- use ASM code + 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention + 11: 0 (reserved) + + One-time table building (smaller code, but not thread-safe if true): + 12: BUILDFIXED -- build static block decoding tables when needed + 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed + 14,15: 0 (reserved) + + Library content (indicates missing functionality): + 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking + deflate code when not needed) + 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect + and decode gzip streams (to avoid linking crc code) + 18-19: 0 (reserved) + + Operation variations (changes in library functionality): + 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate + 21: FASTEST -- deflate algorithm with only one, lowest compression level + 22,23: 0 (reserved) + + The sprintf variant used by gzprintf (zero is best): + 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format + 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! + 26: 0 = returns value, 1 = void -- 1 means inferred string length returned + + Remainder: + 27-31: 0 (reserved) + */ + + + /* utility functions */ + +/* + The following utility functions are implemented on top of the basic + stream-oriented functions. To simplify the interface, some default options + are assumed (compression level and memory usage, standard memory allocation + functions). The source code of these utility functions can be modified if + you need special options. +*/ + +ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed buffer. + + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int level)); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed buffer. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); +/* + compressBound() returns an upper bound on the compressed size after + compress() or compress2() on sourceLen bytes. It would be used before a + compress() or compress2() call to allocate the destination buffer. +*/ + +ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be large enough to hold the entire + uncompressed data. (The size of the uncompressed data must have been saved + previously by the compressor and transmitted to the decompressor by some + mechanism outside the scope of this compression library.) Upon exit, destLen + is the actual size of the uncompressed buffer. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. +*/ + + + /* gzip file access functions */ + +/* + This library supports reading and writing files in gzip (.gz) format with + an interface similar to that of stdio, using the functions that start with + "gz". The gzip format is different from the zlib format. gzip is a gzip + wrapper, documented in RFC 1952, wrapped around a deflate stream. +*/ + +typedef voidp gzFile; /* opaque gzip file descriptor */ + +/* +ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); + + Opens a gzip (.gz) file for reading or writing. The mode parameter is as + in fopen ("rb" or "wb") but can also include a compression level ("wb9") or + a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only + compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F' + for fixed code compression as in "wb9F". (See the description of + deflateInit2 for more information about the strategy parameter.) Also "a" + can be used instead of "w" to request that the gzip stream that will be + written be appended to the file. "+" will result in an error, since reading + and writing to the same gzip file is not supported. + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. + + gzopen returns NULL if the file could not be opened, if there was + insufficient memory to allocate the gzFile state, or if an invalid mode was + specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). + errno can be checked to determine if the reason gzopen failed was that the + file could not be opened. +*/ + +ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); +/* + gzdopen associates a gzFile with the file descriptor fd. File descriptors + are obtained from calls like open, dup, creat, pipe or fileno (if the file + has been previously opened with fopen). The mode parameter is as in gzopen. + + The next call of gzclose on the returned gzFile will also close the file + descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor + fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, + mode);. The duplicated descriptor should be saved to avoid a leak, since + gzdopen does not close fd if it fails. + + gzdopen returns NULL if there was insufficient memory to allocate the + gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not + provided, or '+' was provided), or if fd is -1. The file descriptor is not + used until the next gz* read, write, seek, or close operation, so gzdopen + will not detect if fd is invalid (unless fd is -1). +*/ + +ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size)); +/* + Set the internal buffer size used by this library's functions. The + default buffer size is 8192 bytes. This function must be called after + gzopen() or gzdopen(), and before any other calls that read or write the + file. The buffer memory allocation is always deferred to the first read or + write. Two buffers are allocated, either both of the specified size when + writing, or one of the specified size and the other twice that size when + reading. A larger buffer size of, for example, 64K or 128K bytes will + noticeably increase the speed of decompression (reading). + + The new buffer size also affects the maximum length for gzprintf(). + + gzbuffer() returns 0 on success, or -1 on failure, such as being called + too late. +*/ + +ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); +/* + Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. + + gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not + opened for writing. +*/ + +ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. If + the input file was not in gzip format, gzread copies the given number of + bytes into the buffer. + + After reaching the end of a gzip stream in the input, gzread will continue + to read, looking for another gzip stream, or failing that, reading the rest + of the input file directly without decompression. The entire input file + will be read if gzread is called until it returns less than the requested + len. + + gzread returns the number of uncompressed bytes actually read, less than + len for end of file, or -1 for error. +*/ + +ZEXTERN int ZEXPORT gzwrite OF((gzFile file, + voidpc buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes written or 0 in case of + error. +*/ + +ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...)); +/* + Converts, formats, and writes the arguments to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written, or 0 in case of error. The number of + uncompressed bytes written is limited to 8191, or one less than the buffer + size given to gzbuffer(). The caller should assure that this limit is not + exceeded. If it is exceeded, then gzprintf() will return an error (0) with + nothing written. In this case, there may also be a buffer overflow with + unpredictable consequences, which is possible only if zlib was compiled with + the insecure functions sprintf() or vsprintf() because the secure snprintf() + or vsnprintf() functions were not available. This can be determined using + zlibCompileFlags(). +*/ + +ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); +/* + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + + gzputs returns the number of characters written, or -1 in case of error. +*/ + +ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); +/* + Reads bytes from the compressed file until len-1 characters are read, or a + newline character is read and transferred to buf, or an end-of-file + condition is encountered. If any characters are read or if len == 1, the + string is terminated with a null character. If no characters are read due + to an end-of-file or len < 1, then the buffer is left untouched. + + gzgets returns buf which is a null-terminated string, or it returns NULL + for end-of-file or in case of error. If there was an error, the contents at + buf are indeterminate. +*/ + +ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); +/* + Writes c, converted to an unsigned char, into the compressed file. gzputc + returns the value that was written, or -1 in case of error. +*/ + +ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); +/* + Reads one byte from the compressed file. gzgetc returns this byte or -1 + in case of end of file or error. +*/ + +ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); +/* + Push one character back onto the stream to be read as the first character + on the next read. At least one character of push-back is allowed. + gzungetc() returns the character pushed, or -1 on failure. gzungetc() will + fail if c is -1, and may fail if a character has been pushed but not read + yet. If gzungetc is used immediately after gzopen or gzdopen, at least the + output buffer size of pushed characters is allowed. (See gzbuffer above.) + The pushed character will be discarded if the stream is repositioned with + gzseek() or gzrewind(). +*/ + +ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter flush + is as in the deflate() function. The return value is the zlib error number + (see function gzerror below). gzflush is only permitted when writing. + + If the flush parameter is Z_FINISH, the remaining data is written and the + gzip stream is completed in the output. If gzwrite() is called again, a new + gzip stream will be started in the output. gzread() is able to read such + concatented gzip streams. + + gzflush should be called only when strictly necessary because it will + degrade compression if called too often. +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, + z_off_t offset, int whence)); + + Sets the starting position for the next gzread or gzwrite on the given + compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); +/* + Rewinds the given file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +*/ + +/* +ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); + + Returns the starting position for the next gzread or gzwrite on the given + compressed file. This position represents a number of bytes in the + uncompressed data stream, and is zero when starting, even if appending or + reading a gzip stream from the middle of a file using gzdopen(). + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file)); + + Returns the current offset in the file being read or written. This offset + includes the count of bytes that precede the gzip stream, for example when + appending or when using gzdopen() for reading. When reading, the offset + does not include as yet unused buffered input. This information can be used + for a progress indicator. On error, gzoffset() returns -1. +*/ + +ZEXTERN int ZEXPORT gzeof OF((gzFile file)); +/* + Returns true (1) if the end-of-file indicator has been set while reading, + false (0) otherwise. Note that the end-of-file indicator is set only if the + read tried to go past the end of the input, but came up short. Therefore, + just like feof(), gzeof() may return false even if there is no more data to + read, in the event that the last read request was for the exact number of + bytes remaining in the input file. This will happen if the input file size + is an exact multiple of the buffer size. + + If gzeof() returns true, then the read functions will return no more data, + unless the end-of-file indicator is reset by gzclearerr() and the input file + has grown since the previous end of file was detected. +*/ + +ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); +/* + Returns true (1) if file is being copied directly while reading, or false + (0) if file is a gzip stream being decompressed. This state can change from + false to true while reading the input file if the end of a gzip stream is + reached, but is followed by data that is not another gzip stream. + + If the input file is empty, gzdirect() will return true, since the input + does not contain a gzip stream. + + If gzdirect() is used immediately after gzopen() or gzdopen() it will + cause buffers to be allocated to allow reading the file to determine if it + is a gzip file. Therefore if gzbuffer() is used, it should be called before + gzdirect(). +*/ + +ZEXTERN int ZEXPORT gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file and + deallocates the (de)compression state. Note that once file is closed, you + cannot call gzerror with file, since its structures have been deallocated. + gzclose must not be called more than once on the same file, just as free + must not be called more than once on the same allocation. + + gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a + file operation error, or Z_OK on success. +*/ + +ZEXTERN int ZEXPORT gzclose_r OF((gzFile file)); +ZEXTERN int ZEXPORT gzclose_w OF((gzFile file)); +/* + Same as gzclose(), but gzclose_r() is only for use when reading, and + gzclose_w() is only for use when writing or appending. The advantage to + using these instead of gzclose() is that they avoid linking in zlib + compression or decompression code that is not used when only reading or only + writing respectively. If gzclose() is used, then both compression and + decompression code will be included the application when linking to a static + zlib library. +*/ + +ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the given + compressed file. errnum is set to zlib error number. If an error occurred + in the file system and not in the compression library, errnum is set to + Z_ERRNO and the application may consult errno to get the exact error code. + + The application must not modify the returned string. Future calls to + this function may invalidate the previously returned string. If file is + closed, then the string previously returned by gzerror will no longer be + available. + + gzerror() should be used to distinguish errors from end-of-file for those + functions above that do not distinguish those cases in their return values. +*/ + +ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); +/* + Clears the error and end-of-file flags for file. This is analogous to the + clearerr() function in stdio. This is useful for continuing to read a gzip + file that is being written concurrently. +*/ + + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the compression + library. +*/ + +ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is Z_NULL, this function returns the + required initial value for the checksum. + + An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. + + Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +/* +ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, + z_off_t len2)); + + Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 + and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for + each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. +*/ + +ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); +/* + Update a running CRC-32 with the bytes buf[0..len-1] and return the + updated CRC-32. If buf is Z_NULL, this function returns the required + initial value for the for the crc. Pre- and post-conditioning (one's + complement) is performed within this function so it shouldn't be done by the + application. + + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + +/* +ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); + + Combine two CRC-32 check values into one. For two sequences of bytes, + seq1 and seq2 with lengths len1 and len2, CRC-32 check values were + calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 + check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and + len2. +*/ + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size)); +ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, + unsigned char FAR *window, + const char *version, + int stream_size)); +#define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) +#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) +#define inflateBackInit(strm, windowBits, window) \ + inflateBackInit_((strm), (windowBits), (window), \ + ZLIB_VERSION, sizeof(z_stream)) + +/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or + * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if + * both are true, the application gets the *64 functions, and the regular + * functions are changed to 64 bits) -- in case these are set on systems + * without large file support, _LFS64_LARGEFILE must also be true + */ +#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0 + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); + ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t)); +#endif + +#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0 +# define gzopen gzopen64 +# define gzseek gzseek64 +# define gztell gztell64 +# define gzoffset gzoffset64 +# define adler32_combine adler32_combine64 +# define crc32_combine crc32_combine64 +# ifdef _LARGEFILE64_SOURCE + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int)); + ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); +# endif +#else + ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *)); + ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int)); + ZEXTERN z_off_t ZEXPORT gztell OF((gzFile)); + ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); +#endif + +/* hack for buggy compilers */ +#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) + struct internal_state {int dummy;}; +#endif + +/* undocumented functions */ +ZEXTERN const char * ZEXPORT zError OF((int)); +ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp)); +ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); +ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int)); + +#ifdef __cplusplus +} +#endif + +#endif /* ZLIB_H */ diff -r 49ab679cb384 -r 00696c1450da tools/build_windows.bat --- a/tools/build_windows.bat Wed Oct 24 10:23:37 2012 +0100 +++ b/tools/build_windows.bat Wed Oct 24 13:21:18 2012 +0100 @@ -10,7 +10,7 @@ echo Fetching all DLLs... for %%G in (QtCore4 QtGui4 QtNetwork4 libgcc_s_dw2-1 mingwm10) do ( - xcopy /d/y %QTDIR%\%%G.dll bin\ + xcopy /d/y/l %QTDIR%\%%G.dll bin\ ) if not exist %CD%\misc\winutils\bin\ mkdir %CD%\misc\winutils\bin\ @@ -20,6 +20,9 @@ if not exist %CD%\misc\winutils\bin\SDL_mixer.dll cscript %CD%\tools\w32DownloadUnzip.vbs http://www.libsdl.org/projects/SDL_mixer/release/SDL_mixer-1.2.12-win32.zip %CD%\misc\winutils\bin if not exist %CD%\misc\winutils\bin\SDL_ttf.dll cscript %CD%\tools\w32DownloadUnzip.vbs http://www.libsdl.org/projects/SDL_ttf/release/SDL_ttf-2.0.11-win32.zip %CD%\misc\winutils\bin +::this is needed because fpc png unit hardcodes libpng-1.2.12 +if not exist %CD%\misc\winutils\bin\libpng13.dll copy /y %CD%\misc\winutils\bin\libpng15-15.dll %CD%\misc\winutils\bin\libpng13.dll + xcopy /d/y %CD%\misc\winutils\bin\*.dll bin xcopy /d/y %CD%\misc\winutils\bin\*.txt bin @@ -28,7 +31,7 @@ echo Running cmake... set ERRORLEVEL= -cmake -G "MinGW Makefiles" -DCMAKE_INCLUDE_PATH="%CD%\misc\winutils\include" -DCMAKE_LIBRARY_PATH="%CD%\misc\winutils\lib" . +cmake -G "MinGW Makefiles" -DCMAKE_INCLUDE_PATH="%CD%\misc\winutils\include" -DCMAKE_LIBRARY_PATH="%CD%\misc\winutils\lib" -DPNG_LIBRARY="%CD%\misc\winutils\bin\libpng13.dll" . if %ERRORLEVEL% NEQ 0 goto exitpoint @@ -43,7 +46,7 @@ if %ERRORLEVEL% NEQ 0 goto exitpoint echo Creating commodity shortcut... -COPY /y %CD%\misc\winutils\Hedgewars.lnk C:%HOMEPATH%\Desktop\Hedgewars.lnk +copy /y %CD%\misc\winutils\Hedgewars.lnk C:%HOMEPATH%\Desktop\Hedgewars.lnk echo ALL DONE, Hedgewars has been successfully compiled and installed