equal
deleted
inserted
replaced
14 |
14 |
15 Open an SVG. Ideally one of simple line art, without too much use of fill or filters. |
15 Open an SVG. Ideally one of simple line art, without too much use of fill or filters. |
16 |
16 |
17 1) Select all in the image and choose ungroup, then combine all paths in the drawing (select them, then choose Path->Combine). |
17 1) Select all in the image and choose ungroup, then combine all paths in the drawing (select them, then choose Path->Combine). |
18 Note. I had some difficulty doing that with some images even after repeated use of ungroup. I ended up just going into the SVG file and deleting all the groups. This usually happens if there are filters in place. Removing all the <g> tags in the SVG is faster than cleaning up the filters in inkscape. |
18 Note. I had some difficulty doing that with some images even after repeated use of ungroup. I ended up just going into the SVG file and deleting all the groups. This usually happens if there are filters in place. Removing all the <g> tags in the SVG is faster than cleaning up the filters in inkscape. |
19 Also, some paths might be worth eliminating altogether. In order to get a better idea of what it'll look like, try: View->Display Mode->Outline |
19 Also, some paths might be worth eliminating altogether. In order to get a better idea of what it'll look like, try: View->Display Mode->Outline. To simulate occluding, you can try combining individual paths first, and using union to combine into larger groups. This takes a bit more work. |
20 |
20 |
21 2) Click on the path, and choose dimensions for W and H that would look good in the game (no more than 4096 for W and 2048 for H). The Lock button may be helpful here |
21 2) Click on the path, and choose dimensions for W and H that would look good in the game (no more than 4096 for W and 2048 for H). The Lock button may be helpful here |
22 |
22 |
23 3) Go to File->Document Properties and specify 4096 for W and 2048 for H. You may want to then reposition the art to be more centred vertically or horizontally. |
23 3) Go to File->Document Properties and specify 4096 for W and 2048 for H. You may want to then reposition the art to be more centred vertically or horizontally. |
24 |
24 |