--- a/misc/quazip/unzip.h Mon Oct 29 17:38:54 2012 -0400
+++ b/misc/quazip/unzip.h Mon Oct 29 18:20:08 2012 -0400
@@ -1,356 +1,356 @@
-/* unzip.h -- IO for uncompress .zip files using zlib
- Version 1.01e, February 12th, 2005
-
- Copyright (C) 1998-2005 Gilles Vollant
-
- This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g
- WinZip, InfoZip tools and compatible.
-
- Multi volume ZipFile (span) are not supported.
- Encryption compatible with pkzip 2.04g only supported
- Old compressions used by old PKZip 1.x are not supported
-
-
- I WAIT FEEDBACK at mail info@winimage.com
- Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution
-
- Condition of use and distribution are the same than zlib :
-
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
-
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- 2. Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- 3. This notice may not be removed or altered from any source distribution.
-
- Modified by Sergey A. Tachenov to integrate with Qt.
-
-
-*/
-
-/* for more info about .ZIP format, see
- http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip
- http://www.info-zip.org/pub/infozip/doc/
- PkWare has also a specification at :
- ftp://ftp.pkware.com/probdesc.zip
-*/
-
-#ifndef _unz_H
-#define _unz_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifndef _ZLIB_H
-#include "zlib.h"
-#endif
-
-#ifndef _ZLIBIOAPI_H
-#include "ioapi.h"
-#endif
-
-#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP)
-/* like the STRICT of WIN32, we define a pointer that cannot be converted
- from (void*) without cast */
-typedef struct TagunzFile__ { int unused; } unzFile__;
-typedef unzFile__ *unzFile;
-#else
-typedef voidp unzFile;
-#endif
-
-
-#define UNZ_OK (0)
-#define UNZ_END_OF_LIST_OF_FILE (-100)
-#define UNZ_ERRNO (Z_ERRNO)
-#define UNZ_EOF (0)
-#define UNZ_PARAMERROR (-102)
-#define UNZ_BADZIPFILE (-103)
-#define UNZ_INTERNALERROR (-104)
-#define UNZ_CRCERROR (-105)
-
-/* tm_unz contain date/time info */
-typedef struct tm_unz_s
-{
- uInt tm_sec; /* seconds after the minute - [0,59] */
- uInt tm_min; /* minutes after the hour - [0,59] */
- uInt tm_hour; /* hours since midnight - [0,23] */
- uInt tm_mday; /* day of the month - [1,31] */
- uInt tm_mon; /* months since January - [0,11] */
- uInt tm_year; /* years - [1980..2044] */
-} tm_unz;
-
-/* unz_global_info structure contain global data about the ZIPfile
- These data comes from the end of central dir */
-typedef struct unz_global_info_s
-{
- uLong number_entry; /* total number of entries in
- the central dir on this disk */
- uLong size_comment; /* size of the global comment of the zipfile */
-} unz_global_info;
-
-
-/* unz_file_info contain information about a file in the zipfile */
-typedef struct unz_file_info_s
-{
- uLong version; /* version made by 2 bytes */
- uLong version_needed; /* version needed to extract 2 bytes */
- uLong flag; /* general purpose bit flag 2 bytes */
- uLong compression_method; /* compression method 2 bytes */
- uLong dosDate; /* last mod file date in Dos fmt 4 bytes */
- uLong crc; /* crc-32 4 bytes */
- uLong compressed_size; /* compressed size 4 bytes */
- uLong uncompressed_size; /* uncompressed size 4 bytes */
- uLong size_filename; /* filename length 2 bytes */
- uLong size_file_extra; /* extra field length 2 bytes */
- uLong size_file_comment; /* file comment length 2 bytes */
-
- uLong disk_num_start; /* disk number start 2 bytes */
- uLong internal_fa; /* internal file attributes 2 bytes */
- uLong external_fa; /* external file attributes 4 bytes */
-
- tm_unz tmu_date;
-} unz_file_info;
-
-extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1,
- const char* fileName2,
- int iCaseSensitivity));
-/*
- Compare two filename (fileName1,fileName2).
- If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
- If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
- or strcasecmp)
- If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
- (like 1 on Unix, 2 on Windows)
-*/
-
-
-extern unzFile ZEXPORT unzOpen OF((voidpf file));
-/*
- Open a Zip file. path contain whatever zopen_file from the IO API
- accepts. For Qt implementation it is a pointer to QIODevice, for
- fopen() implementation it's a file name.
- If the zipfile cannot be opened (file don't exist or in not valid), the
- return value is NULL.
- Else, the return value is a unzFile Handle, usable with other function
- of this unzip package.
-*/
-
-extern unzFile ZEXPORT unzOpen2 OF((voidpf file,
- zlib_filefunc_def* pzlib_filefunc_def));
-/*
- Open a Zip file, like unzOpen, but provide a set of file low level API
- for read/write the zip file (see ioapi.h)
-*/
-
-extern int ZEXPORT unzClose OF((unzFile file));
-/*
- Close a ZipFile opened with unzipOpen.
- If there is files inside the .Zip opened with unzOpenCurrentFile (see later),
- these files MUST be closed with unzipCloseCurrentFile before call unzipClose.
- return UNZ_OK if there is no problem. */
-
-extern int ZEXPORT unzGetGlobalInfo OF((unzFile file,
- unz_global_info *pglobal_info));
-/*
- Write info about the ZipFile in the *pglobal_info structure.
- No preparation of the structure is needed
- return UNZ_OK if there is no problem. */
-
-
-extern int ZEXPORT unzGetGlobalComment OF((unzFile file,
- char *szComment,
- uLong uSizeBuf));
-/*
- Get the global comment string of the ZipFile, in the szComment buffer.
- uSizeBuf is the size of the szComment buffer.
- return the number of byte copied or an error code <0
-*/
-
-
-/***************************************************************************/
-/* Unzip package allow you browse the directory of the zipfile */
-
-extern int ZEXPORT unzGoToFirstFile OF((unzFile file));
-/*
- Set the current file of the zipfile to the first file.
- return UNZ_OK if there is no problem
-*/
-
-extern int ZEXPORT unzGoToNextFile OF((unzFile file));
-/*
- Set the current file of the zipfile to the next file.
- return UNZ_OK if there is no problem
- return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
-*/
-
-extern int ZEXPORT unzLocateFile OF((unzFile file,
- const char *szFileName,
- int iCaseSensitivity));
-/*
- Try locate the file szFileName in the zipfile.
- For the iCaseSensitivity signification, see unzStringFileNameCompare
-
- return value :
- UNZ_OK if the file is found. It becomes the current file.
- UNZ_END_OF_LIST_OF_FILE if the file is not found
-*/
-
-
-/* ****************************************** */
-/* Ryan supplied functions */
-/* unz_file_info contain information about a file in the zipfile */
-typedef struct unz_file_pos_s
-{
- uLong pos_in_zip_directory; /* offset in zip file directory */
- uLong num_of_file; /* # of file */
-} unz_file_pos;
-
-extern int ZEXPORT unzGetFilePos(
- unzFile file,
- unz_file_pos* file_pos);
-
-extern int ZEXPORT unzGoToFilePos(
- unzFile file,
- unz_file_pos* file_pos);
-
-/* ****************************************** */
-
-extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
- unz_file_info *pfile_info,
- char *szFileName,
- uLong fileNameBufferSize,
- void *extraField,
- uLong extraFieldBufferSize,
- char *szComment,
- uLong commentBufferSize));
-/*
- Get Info about the current file
- if pfile_info!=NULL, the *pfile_info structure will contain somes info about
- the current file
- if szFileName!=NULL, the filemane string will be copied in szFileName
- (fileNameBufferSize is the size of the buffer)
- if extraField!=NULL, the extra field information will be copied in extraField
- (extraFieldBufferSize is the size of the buffer).
- This is the Central-header version of the extra field
- if szComment!=NULL, the comment string of the file will be copied in szComment
- (commentBufferSize is the size of the buffer)
-*/
-
-/***************************************************************************/
-/* for reading the content of the current zipfile, you can open it, read data
- from it, and close it (you can close it before reading all the file)
- */
-
-extern int ZEXPORT unzOpenCurrentFile OF((unzFile file));
-/*
- Open for reading data the current file in the zipfile.
- If there is no error, the return value is UNZ_OK.
-*/
-
-extern int ZEXPORT unzOpenCurrentFilePassword OF((unzFile file,
- const char* password));
-/*
- Open for reading data the current file in the zipfile.
- password is a crypting password
- If there is no error, the return value is UNZ_OK.
-*/
-
-extern int ZEXPORT unzOpenCurrentFile2 OF((unzFile file,
- int* method,
- int* level,
- int raw));
-/*
- Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
- if raw==1
- *method will receive method of compression, *level will receive level of
- compression
- note : you can set level parameter as NULL (if you did not want known level,
- but you CANNOT set method parameter as NULL
-*/
-
-extern int ZEXPORT unzOpenCurrentFile3 OF((unzFile file,
- int* method,
- int* level,
- int raw,
- const char* password));
-/*
- Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
- if raw==1
- *method will receive method of compression, *level will receive level of
- compression
- note : you can set level parameter as NULL (if you did not want known level,
- but you CANNOT set method parameter as NULL
-*/
-
-
-extern int ZEXPORT unzCloseCurrentFile OF((unzFile file));
-/*
- Close the file in zip opened with unzOpenCurrentFile
- Return UNZ_CRCERROR if all the file was read but the CRC is not good
-*/
-
-extern int ZEXPORT unzReadCurrentFile OF((unzFile file,
- voidp buf,
- unsigned len));
-/*
- Read bytes from the current file (opened by unzOpenCurrentFile)
- buf contain buffer where data must be copied
- len the size of buf.
-
- return the number of byte copied if somes bytes are copied
- return 0 if the end of file was reached
- return <0 with error code if there is an error
- (UNZ_ERRNO for IO error, or zLib error for uncompress error)
-*/
-
-extern z_off_t ZEXPORT unztell OF((unzFile file));
-/*
- Give the current position in uncompressed data
-*/
-
-extern int ZEXPORT unzeof OF((unzFile file));
-/*
- return 1 if the end of file was reached, 0 elsewhere
-*/
-
-extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
- voidp buf,
- unsigned len));
-/*
- Read extra field from the current file (opened by unzOpenCurrentFile)
- This is the local-header version of the extra field (sometimes, there is
- more info in the local-header version than in the central-header)
-
- if buf==NULL, it return the size of the local extra field
-
- if buf!=NULL, len is the size of the buffer, the extra header is copied in
- buf.
- the return value is the number of bytes copied in buf, or (if <0)
- the error code
-*/
-
-/***************************************************************************/
-
-/* Get the current file offset */
-extern uLong ZEXPORT unzGetOffset (unzFile file);
-
-/* Set the current file offset */
-extern int ZEXPORT unzSetOffset (unzFile file, uLong pos);
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _unz_H */
+/* unzip.h -- IO for uncompress .zip files using zlib
+ Version 1.01e, February 12th, 2005
+
+ Copyright (C) 1998-2005 Gilles Vollant
+
+ This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g
+ WinZip, InfoZip tools and compatible.
+
+ Multi volume ZipFile (span) are not supported.
+ Encryption compatible with pkzip 2.04g only supported
+ Old compressions used by old PKZip 1.x are not supported
+
+
+ I WAIT FEEDBACK at mail info@winimage.com
+ Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution
+
+ Condition of use and distribution are the same than zlib :
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Modified by Sergey A. Tachenov to integrate with Qt.
+
+
+*/
+
+/* for more info about .ZIP format, see
+ http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip
+ http://www.info-zip.org/pub/infozip/doc/
+ PkWare has also a specification at :
+ ftp://ftp.pkware.com/probdesc.zip
+*/
+
+#ifndef _unz_H
+#define _unz_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#ifndef _ZLIBIOAPI_H
+#include "ioapi.h"
+#endif
+
+#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+ from (void*) without cast */
+typedef struct TagunzFile__ { int unused; } unzFile__;
+typedef unzFile__ *unzFile;
+#else
+typedef voidp unzFile;
+#endif
+
+
+#define UNZ_OK (0)
+#define UNZ_END_OF_LIST_OF_FILE (-100)
+#define UNZ_ERRNO (Z_ERRNO)
+#define UNZ_EOF (0)
+#define UNZ_PARAMERROR (-102)
+#define UNZ_BADZIPFILE (-103)
+#define UNZ_INTERNALERROR (-104)
+#define UNZ_CRCERROR (-105)
+
+/* tm_unz contain date/time info */
+typedef struct tm_unz_s
+{
+ uInt tm_sec; /* seconds after the minute - [0,59] */
+ uInt tm_min; /* minutes after the hour - [0,59] */
+ uInt tm_hour; /* hours since midnight - [0,23] */
+ uInt tm_mday; /* day of the month - [1,31] */
+ uInt tm_mon; /* months since January - [0,11] */
+ uInt tm_year; /* years - [1980..2044] */
+} tm_unz;
+
+/* unz_global_info structure contain global data about the ZIPfile
+ These data comes from the end of central dir */
+typedef struct unz_global_info_s
+{
+ uLong number_entry; /* total number of entries in
+ the central dir on this disk */
+ uLong size_comment; /* size of the global comment of the zipfile */
+} unz_global_info;
+
+
+/* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_info_s
+{
+ uLong version; /* version made by 2 bytes */
+ uLong version_needed; /* version needed to extract 2 bytes */
+ uLong flag; /* general purpose bit flag 2 bytes */
+ uLong compression_method; /* compression method 2 bytes */
+ uLong dosDate; /* last mod file date in Dos fmt 4 bytes */
+ uLong crc; /* crc-32 4 bytes */
+ uLong compressed_size; /* compressed size 4 bytes */
+ uLong uncompressed_size; /* uncompressed size 4 bytes */
+ uLong size_filename; /* filename length 2 bytes */
+ uLong size_file_extra; /* extra field length 2 bytes */
+ uLong size_file_comment; /* file comment length 2 bytes */
+
+ uLong disk_num_start; /* disk number start 2 bytes */
+ uLong internal_fa; /* internal file attributes 2 bytes */
+ uLong external_fa; /* external file attributes 4 bytes */
+
+ tm_unz tmu_date;
+} unz_file_info;
+
+extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1,
+ const char* fileName2,
+ int iCaseSensitivity));
+/*
+ Compare two filename (fileName1,fileName2).
+ If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
+ If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
+ or strcasecmp)
+ If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
+ (like 1 on Unix, 2 on Windows)
+*/
+
+
+extern unzFile ZEXPORT unzOpen OF((voidpf file));
+/*
+ Open a Zip file. path contain whatever zopen_file from the IO API
+ accepts. For Qt implementation it is a pointer to QIODevice, for
+ fopen() implementation it's a file name.
+ If the zipfile cannot be opened (file don't exist or in not valid), the
+ return value is NULL.
+ Else, the return value is a unzFile Handle, usable with other function
+ of this unzip package.
+*/
+
+extern unzFile ZEXPORT unzOpen2 OF((voidpf file,
+ zlib_filefunc_def* pzlib_filefunc_def));
+/*
+ Open a Zip file, like unzOpen, but provide a set of file low level API
+ for read/write the zip file (see ioapi.h)
+*/
+
+extern int ZEXPORT unzClose OF((unzFile file));
+/*
+ Close a ZipFile opened with unzipOpen.
+ If there is files inside the .Zip opened with unzOpenCurrentFile (see later),
+ these files MUST be closed with unzipCloseCurrentFile before call unzipClose.
+ return UNZ_OK if there is no problem. */
+
+extern int ZEXPORT unzGetGlobalInfo OF((unzFile file,
+ unz_global_info *pglobal_info));
+/*
+ Write info about the ZipFile in the *pglobal_info structure.
+ No preparation of the structure is needed
+ return UNZ_OK if there is no problem. */
+
+
+extern int ZEXPORT unzGetGlobalComment OF((unzFile file,
+ char *szComment,
+ uLong uSizeBuf));
+/*
+ Get the global comment string of the ZipFile, in the szComment buffer.
+ uSizeBuf is the size of the szComment buffer.
+ return the number of byte copied or an error code <0
+*/
+
+
+/***************************************************************************/
+/* Unzip package allow you browse the directory of the zipfile */
+
+extern int ZEXPORT unzGoToFirstFile OF((unzFile file));
+/*
+ Set the current file of the zipfile to the first file.
+ return UNZ_OK if there is no problem
+*/
+
+extern int ZEXPORT unzGoToNextFile OF((unzFile file));
+/*
+ Set the current file of the zipfile to the next file.
+ return UNZ_OK if there is no problem
+ return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
+*/
+
+extern int ZEXPORT unzLocateFile OF((unzFile file,
+ const char *szFileName,
+ int iCaseSensitivity));
+/*
+ Try locate the file szFileName in the zipfile.
+ For the iCaseSensitivity signification, see unzStringFileNameCompare
+
+ return value :
+ UNZ_OK if the file is found. It becomes the current file.
+ UNZ_END_OF_LIST_OF_FILE if the file is not found
+*/
+
+
+/* ****************************************** */
+/* Ryan supplied functions */
+/* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_pos_s
+{
+ uLong pos_in_zip_directory; /* offset in zip file directory */
+ uLong num_of_file; /* # of file */
+} unz_file_pos;
+
+extern int ZEXPORT unzGetFilePos(
+ unzFile file,
+ unz_file_pos* file_pos);
+
+extern int ZEXPORT unzGoToFilePos(
+ unzFile file,
+ unz_file_pos* file_pos);
+
+/* ****************************************** */
+
+extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
+ unz_file_info *pfile_info,
+ char *szFileName,
+ uLong fileNameBufferSize,
+ void *extraField,
+ uLong extraFieldBufferSize,
+ char *szComment,
+ uLong commentBufferSize));
+/*
+ Get Info about the current file
+ if pfile_info!=NULL, the *pfile_info structure will contain somes info about
+ the current file
+ if szFileName!=NULL, the filemane string will be copied in szFileName
+ (fileNameBufferSize is the size of the buffer)
+ if extraField!=NULL, the extra field information will be copied in extraField
+ (extraFieldBufferSize is the size of the buffer).
+ This is the Central-header version of the extra field
+ if szComment!=NULL, the comment string of the file will be copied in szComment
+ (commentBufferSize is the size of the buffer)
+*/
+
+/***************************************************************************/
+/* for reading the content of the current zipfile, you can open it, read data
+ from it, and close it (you can close it before reading all the file)
+ */
+
+extern int ZEXPORT unzOpenCurrentFile OF((unzFile file));
+/*
+ Open for reading data the current file in the zipfile.
+ If there is no error, the return value is UNZ_OK.
+*/
+
+extern int ZEXPORT unzOpenCurrentFilePassword OF((unzFile file,
+ const char* password));
+/*
+ Open for reading data the current file in the zipfile.
+ password is a crypting password
+ If there is no error, the return value is UNZ_OK.
+*/
+
+extern int ZEXPORT unzOpenCurrentFile2 OF((unzFile file,
+ int* method,
+ int* level,
+ int raw));
+/*
+ Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
+ if raw==1
+ *method will receive method of compression, *level will receive level of
+ compression
+ note : you can set level parameter as NULL (if you did not want known level,
+ but you CANNOT set method parameter as NULL
+*/
+
+extern int ZEXPORT unzOpenCurrentFile3 OF((unzFile file,
+ int* method,
+ int* level,
+ int raw,
+ const char* password));
+/*
+ Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
+ if raw==1
+ *method will receive method of compression, *level will receive level of
+ compression
+ note : you can set level parameter as NULL (if you did not want known level,
+ but you CANNOT set method parameter as NULL
+*/
+
+
+extern int ZEXPORT unzCloseCurrentFile OF((unzFile file));
+/*
+ Close the file in zip opened with unzOpenCurrentFile
+ Return UNZ_CRCERROR if all the file was read but the CRC is not good
+*/
+
+extern int ZEXPORT unzReadCurrentFile OF((unzFile file,
+ voidp buf,
+ unsigned len));
+/*
+ Read bytes from the current file (opened by unzOpenCurrentFile)
+ buf contain buffer where data must be copied
+ len the size of buf.
+
+ return the number of byte copied if somes bytes are copied
+ return 0 if the end of file was reached
+ return <0 with error code if there is an error
+ (UNZ_ERRNO for IO error, or zLib error for uncompress error)
+*/
+
+extern z_off_t ZEXPORT unztell OF((unzFile file));
+/*
+ Give the current position in uncompressed data
+*/
+
+extern int ZEXPORT unzeof OF((unzFile file));
+/*
+ return 1 if the end of file was reached, 0 elsewhere
+*/
+
+extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
+ voidp buf,
+ unsigned len));
+/*
+ Read extra field from the current file (opened by unzOpenCurrentFile)
+ This is the local-header version of the extra field (sometimes, there is
+ more info in the local-header version than in the central-header)
+
+ if buf==NULL, it return the size of the local extra field
+
+ if buf!=NULL, len is the size of the buffer, the extra header is copied in
+ buf.
+ the return value is the number of bytes copied in buf, or (if <0)
+ the error code
+*/
+
+/***************************************************************************/
+
+/* Get the current file offset */
+extern uLong ZEXPORT unzGetOffset (unzFile file);
+
+/* Set the current file offset */
+extern int ZEXPORT unzSetOffset (unzFile file, uLong pos);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _unz_H */