--- a/misc/libfreetype/src/truetype/ttgload.c Thu Jul 25 23:16:06 2013 +0200
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,2114 +0,0 @@
-/***************************************************************************/
-/* */
-/* ttgload.c */
-/* */
-/* TrueType Glyph Loader (body). */
-/* */
-/* Copyright 1996-2011 */
-/* David Turner, Robert Wilhelm, and Werner Lemberg. */
-/* */
-/* This file is part of the FreeType project, and may only be used, */
-/* modified, and distributed under the terms of the FreeType project */
-/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
-/* this file you indicate that you have read the license and */
-/* understand and accept it fully. */
-/* */
-/***************************************************************************/
-
-
-#include <ft2build.h>
-#include FT_INTERNAL_DEBUG_H
-#include FT_INTERNAL_CALC_H
-#include FT_INTERNAL_STREAM_H
-#include FT_INTERNAL_SFNT_H
-#include FT_TRUETYPE_TAGS_H
-#include FT_OUTLINE_H
-
-#include "ttgload.h"
-#include "ttpload.h"
-
-#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
-#include "ttgxvar.h"
-#endif
-
-#include "tterrors.h"
-
-
- /*************************************************************************/
- /* */
- /* The macro FT_COMPONENT is used in trace mode. It is an implicit */
- /* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */
- /* messages during execution. */
- /* */
-#undef FT_COMPONENT
-#define FT_COMPONENT trace_ttgload
-
-
- /*************************************************************************/
- /* */
- /* Composite glyph flags. */
- /* */
-#define ARGS_ARE_WORDS 0x0001
-#define ARGS_ARE_XY_VALUES 0x0002
-#define ROUND_XY_TO_GRID 0x0004
-#define WE_HAVE_A_SCALE 0x0008
-/* reserved 0x0010 */
-#define MORE_COMPONENTS 0x0020
-#define WE_HAVE_AN_XY_SCALE 0x0040
-#define WE_HAVE_A_2X2 0x0080
-#define WE_HAVE_INSTR 0x0100
-#define USE_MY_METRICS 0x0200
-#define OVERLAP_COMPOUND 0x0400
-#define SCALED_COMPONENT_OFFSET 0x0800
-#define UNSCALED_COMPONENT_OFFSET 0x1000
-
-
- /*************************************************************************/
- /* */
- /* Return the horizontal metrics in font units for a given glyph. */
- /* */
- FT_LOCAL_DEF( void )
- TT_Get_HMetrics( TT_Face face,
- FT_UInt idx,
- FT_Short* lsb,
- FT_UShort* aw )
- {
- ( (SFNT_Service)face->sfnt )->get_metrics( face, 0, idx, lsb, aw );
-
- FT_TRACE5(( " advance width (font units): %d\n", *aw ));
- FT_TRACE5(( " left side bearing (font units): %d\n", *lsb ));
- }
-
-
- /*************************************************************************/
- /* */
- /* Return the vertical metrics in font units for a given glyph. */
- /* Greg Hitchcock from Microsoft told us that if there were no `vmtx' */
- /* table, typoAscender/Descender from the `OS/2' table would be used */
- /* instead, and if there were no `OS/2' table, use ascender/descender */
- /* from the `hhea' table. But that is not what Microsoft's rasterizer */
- /* apparently does: It uses the ppem value as the advance height, and */
- /* sets the top side bearing to be zero. */
- /* */
- FT_LOCAL_DEF( void )
- TT_Get_VMetrics( TT_Face face,
- FT_UInt idx,
- FT_Short* tsb,
- FT_UShort* ah )
- {
- if ( face->vertical_info )
- ( (SFNT_Service)face->sfnt )->get_metrics( face, 1, idx, tsb, ah );
-
-#if 1 /* Empirically determined, at variance with what MS said */
-
- else
- {
- *tsb = 0;
- *ah = face->root.units_per_EM;
- }
-
-#else /* This is what MS said to do. It isn't what they do, however. */
-
- else if ( face->os2.version != 0xFFFFU )
- {
- *tsb = face->os2.sTypoAscender;
- *ah = face->os2.sTypoAscender - face->os2.sTypoDescender;
- }
- else
- {
- *tsb = face->horizontal.Ascender;
- *ah = face->horizontal.Ascender - face->horizontal.Descender;
- }
-
-#endif
-
- FT_TRACE5(( " advance height (font units): %d\n", *ah ));
- FT_TRACE5(( " top side bearing (font units): %d\n", *tsb ));
- }
-
-
- static void
- tt_get_metrics( TT_Loader loader,
- FT_UInt glyph_index )
- {
- TT_Face face = (TT_Face)loader->face;
-
- FT_Short left_bearing = 0, top_bearing = 0;
- FT_UShort advance_width = 0, advance_height = 0;
-
-
- TT_Get_HMetrics( face, glyph_index,
- &left_bearing,
- &advance_width );
- TT_Get_VMetrics( face, glyph_index,
- &top_bearing,
- &advance_height );
-
- loader->left_bearing = left_bearing;
- loader->advance = advance_width;
- loader->top_bearing = top_bearing;
- loader->vadvance = advance_height;
-
- if ( !loader->linear_def )
- {
- loader->linear_def = 1;
- loader->linear = advance_width;
- }
- }
-
-
-#ifdef FT_CONFIG_OPTION_INCREMENTAL
-
- static void
- tt_get_metrics_incr_overrides( TT_Loader loader,
- FT_UInt glyph_index )
- {
- TT_Face face = (TT_Face)loader->face;
-
- FT_Short left_bearing = 0, top_bearing = 0;
- FT_UShort advance_width = 0, advance_height = 0;
-
-
- /* If this is an incrementally loaded font check whether there are */
- /* overriding metrics for this glyph. */
- if ( face->root.internal->incremental_interface &&
- face->root.internal->incremental_interface->funcs->get_glyph_metrics )
- {
- FT_Incremental_MetricsRec metrics;
- FT_Error error;
-
-
- metrics.bearing_x = loader->left_bearing;
- metrics.bearing_y = 0;
- metrics.advance = loader->advance;
- metrics.advance_v = 0;
-
- error = face->root.internal->incremental_interface->funcs->get_glyph_metrics(
- face->root.internal->incremental_interface->object,
- glyph_index, FALSE, &metrics );
- if ( error )
- goto Exit;
-
- left_bearing = (FT_Short)metrics.bearing_x;
- advance_width = (FT_UShort)metrics.advance;
-
-#if 0
-
- /* GWW: Do I do the same for vertical metrics? */
- metrics.bearing_x = 0;
- metrics.bearing_y = loader->top_bearing;
- metrics.advance = loader->vadvance;
-
- error = face->root.internal->incremental_interface->funcs->get_glyph_metrics(
- face->root.internal->incremental_interface->object,
- glyph_index, TRUE, &metrics );
- if ( error )
- goto Exit;
-
- top_bearing = (FT_Short)metrics.bearing_y;
- advance_height = (FT_UShort)metrics.advance;
-
-#endif /* 0 */
-
- loader->left_bearing = left_bearing;
- loader->advance = advance_width;
- loader->top_bearing = top_bearing;
- loader->vadvance = advance_height;
-
- if ( !loader->linear_def )
- {
- loader->linear_def = 1;
- loader->linear = advance_width;
- }
- }
-
- Exit:
- return;
- }
-
-#endif /* FT_CONFIG_OPTION_INCREMENTAL */
-
-
- /*************************************************************************/
- /* */
- /* Translates an array of coordinates. */
- /* */
- static void
- translate_array( FT_UInt n,
- FT_Vector* coords,
- FT_Pos delta_x,
- FT_Pos delta_y )
- {
- FT_UInt k;
-
-
- if ( delta_x )
- for ( k = 0; k < n; k++ )
- coords[k].x += delta_x;
-
- if ( delta_y )
- for ( k = 0; k < n; k++ )
- coords[k].y += delta_y;
- }
-
-
-#undef IS_HINTED
-#define IS_HINTED( flags ) ( ( flags & FT_LOAD_NO_HINTING ) == 0 )
-
-
- /*************************************************************************/
- /* */
- /* The following functions are used by default with TrueType fonts. */
- /* However, they can be replaced by alternatives if we need to support */
- /* TrueType-compressed formats (like MicroType) in the future. */
- /* */
- /*************************************************************************/
-
- FT_CALLBACK_DEF( FT_Error )
- TT_Access_Glyph_Frame( TT_Loader loader,
- FT_UInt glyph_index,
- FT_ULong offset,
- FT_UInt byte_count )
- {
- FT_Error error;
- FT_Stream stream = loader->stream;
-
- /* for non-debug mode */
- FT_UNUSED( glyph_index );
-
-
- FT_TRACE4(( "Glyph %ld\n", glyph_index ));
-
- /* the following line sets the `error' variable through macros! */
- if ( FT_STREAM_SEEK( offset ) || FT_FRAME_ENTER( byte_count ) )
- return error;
-
- loader->cursor = stream->cursor;
- loader->limit = stream->limit;
-
- return TT_Err_Ok;
- }
-
-
- FT_CALLBACK_DEF( void )
- TT_Forget_Glyph_Frame( TT_Loader loader )
- {
- FT_Stream stream = loader->stream;
-
-
- FT_FRAME_EXIT();
- }
-
-
- FT_CALLBACK_DEF( FT_Error )
- TT_Load_Glyph_Header( TT_Loader loader )
- {
- FT_Byte* p = loader->cursor;
- FT_Byte* limit = loader->limit;
-
-
- if ( p + 10 > limit )
- return TT_Err_Invalid_Outline;
-
- loader->n_contours = FT_NEXT_SHORT( p );
-
- loader->bbox.xMin = FT_NEXT_SHORT( p );
- loader->bbox.yMin = FT_NEXT_SHORT( p );
- loader->bbox.xMax = FT_NEXT_SHORT( p );
- loader->bbox.yMax = FT_NEXT_SHORT( p );
-
- FT_TRACE5(( " # of contours: %d\n", loader->n_contours ));
- FT_TRACE5(( " xMin: %4d xMax: %4d\n", loader->bbox.xMin,
- loader->bbox.xMax ));
- FT_TRACE5(( " yMin: %4d yMax: %4d\n", loader->bbox.yMin,
- loader->bbox.yMax ));
- loader->cursor = p;
-
- return TT_Err_Ok;
- }
-
-
- FT_CALLBACK_DEF( FT_Error )
- TT_Load_Simple_Glyph( TT_Loader load )
- {
- FT_Error error;
- FT_Byte* p = load->cursor;
- FT_Byte* limit = load->limit;
- FT_GlyphLoader gloader = load->gloader;
- FT_Int n_contours = load->n_contours;
- FT_Outline* outline;
- TT_Face face = (TT_Face)load->face;
- FT_UShort n_ins;
- FT_Int n_points;
-
- FT_Byte *flag, *flag_limit;
- FT_Byte c, count;
- FT_Vector *vec, *vec_limit;
- FT_Pos x;
- FT_Short *cont, *cont_limit, prev_cont;
- FT_Int xy_size = 0;
-
-
- /* check that we can add the contours to the glyph */
- error = FT_GLYPHLOADER_CHECK_POINTS( gloader, 0, n_contours );
- if ( error )
- goto Fail;
-
- /* reading the contours' endpoints & number of points */
- cont = gloader->current.outline.contours;
- cont_limit = cont + n_contours;
-
- /* check space for contours array + instructions count */
- if ( n_contours >= 0xFFF || p + ( n_contours + 1 ) * 2 > limit )
- goto Invalid_Outline;
-
- prev_cont = FT_NEXT_USHORT( p );
-
- if ( n_contours > 0 )
- cont[0] = prev_cont;
-
- for ( cont++; cont < cont_limit; cont++ )
- {
- cont[0] = FT_NEXT_USHORT( p );
- if ( cont[0] <= prev_cont )
- {
- /* unordered contours: this is invalid */
- error = TT_Err_Invalid_Table;
- goto Fail;
- }
- prev_cont = cont[0];
- }
-
- n_points = 0;
- if ( n_contours > 0 )
- {
- n_points = cont[-1] + 1;
- if ( n_points < 0 )
- goto Invalid_Outline;
- }
-
- /* note that we will add four phantom points later */
- error = FT_GLYPHLOADER_CHECK_POINTS( gloader, n_points + 4, 0 );
- if ( error )
- goto Fail;
-
- /* we'd better check the contours table right now */
- outline = &gloader->current.outline;
-
- for ( cont = outline->contours + 1; cont < cont_limit; cont++ )
- if ( cont[-1] >= cont[0] )
- goto Invalid_Outline;
-
- /* reading the bytecode instructions */
- load->glyph->control_len = 0;
- load->glyph->control_data = 0;
-
- if ( p + 2 > limit )
- goto Invalid_Outline;
-
- n_ins = FT_NEXT_USHORT( p );
-
- FT_TRACE5(( " Instructions size: %u\n", n_ins ));
-
- if ( n_ins > face->max_profile.maxSizeOfInstructions )
- {
- FT_TRACE0(( "TT_Load_Simple_Glyph: too many instructions (%d)\n",
- n_ins ));
- error = TT_Err_Too_Many_Hints;
- goto Fail;
- }
-
- if ( ( limit - p ) < n_ins )
- {
- FT_TRACE0(( "TT_Load_Simple_Glyph: instruction count mismatch\n" ));
- error = TT_Err_Too_Many_Hints;
- goto Fail;
- }
-
-#ifdef TT_USE_BYTECODE_INTERPRETER
-
- if ( IS_HINTED( load->load_flags ) )
- {
- load->glyph->control_len = n_ins;
- load->glyph->control_data = load->exec->glyphIns;
-
- FT_MEM_COPY( load->exec->glyphIns, p, (FT_Long)n_ins );
- }
-
-#endif /* TT_USE_BYTECODE_INTERPRETER */
-
- p += n_ins;
-
- /* reading the point tags */
- flag = (FT_Byte*)outline->tags;
- flag_limit = flag + n_points;
-
- FT_ASSERT( flag != NULL );
-
- while ( flag < flag_limit )
- {
- if ( p + 1 > limit )
- goto Invalid_Outline;
-
- *flag++ = c = FT_NEXT_BYTE( p );
- if ( c & 8 )
- {
- if ( p + 1 > limit )
- goto Invalid_Outline;
-
- count = FT_NEXT_BYTE( p );
- if ( flag + (FT_Int)count > flag_limit )
- goto Invalid_Outline;
-
- for ( ; count > 0; count-- )
- *flag++ = c;
- }
- }
-
- /* reading the X coordinates */
-
- vec = outline->points;
- vec_limit = vec + n_points;
- flag = (FT_Byte*)outline->tags;
- x = 0;
-
- if ( p + xy_size > limit )
- goto Invalid_Outline;
-
- for ( ; vec < vec_limit; vec++, flag++ )
- {
- FT_Pos y = 0;
- FT_Byte f = *flag;
-
-
- if ( f & 2 )
- {
- if ( p + 1 > limit )
- goto Invalid_Outline;
-
- y = (FT_Pos)FT_NEXT_BYTE( p );
- if ( ( f & 16 ) == 0 )
- y = -y;
- }
- else if ( ( f & 16 ) == 0 )
- {
- if ( p + 2 > limit )
- goto Invalid_Outline;
-
- y = (FT_Pos)FT_NEXT_SHORT( p );
- }
-
- x += y;
- vec->x = x;
- /* the cast is for stupid compilers */
- *flag = (FT_Byte)( f & ~( 2 | 16 ) );
- }
-
- /* reading the Y coordinates */
-
- vec = gloader->current.outline.points;
- vec_limit = vec + n_points;
- flag = (FT_Byte*)outline->tags;
- x = 0;
-
- for ( ; vec < vec_limit; vec++, flag++ )
- {
- FT_Pos y = 0;
- FT_Byte f = *flag;
-
-
- if ( f & 4 )
- {
- if ( p + 1 > limit )
- goto Invalid_Outline;
-
- y = (FT_Pos)FT_NEXT_BYTE( p );
- if ( ( f & 32 ) == 0 )
- y = -y;
- }
- else if ( ( f & 32 ) == 0 )
- {
- if ( p + 2 > limit )
- goto Invalid_Outline;
-
- y = (FT_Pos)FT_NEXT_SHORT( p );
- }
-
- x += y;
- vec->y = x;
- /* the cast is for stupid compilers */
- *flag = (FT_Byte)( f & FT_CURVE_TAG_ON );
- }
-
- outline->n_points = (FT_UShort)n_points;
- outline->n_contours = (FT_Short) n_contours;
-
- load->cursor = p;
-
- Fail:
- return error;
-
- Invalid_Outline:
- error = TT_Err_Invalid_Outline;
- goto Fail;
- }
-
-
- FT_CALLBACK_DEF( FT_Error )
- TT_Load_Composite_Glyph( TT_Loader loader )
- {
- FT_Error error;
- FT_Byte* p = loader->cursor;
- FT_Byte* limit = loader->limit;
- FT_GlyphLoader gloader = loader->gloader;
- FT_SubGlyph subglyph;
- FT_UInt num_subglyphs;
-
-
- num_subglyphs = 0;
-
- do
- {
- FT_Fixed xx, xy, yy, yx;
- FT_UInt count;
-
-
- /* check that we can load a new subglyph */
- error = FT_GlyphLoader_CheckSubGlyphs( gloader, num_subglyphs + 1 );
- if ( error )
- goto Fail;
-
- /* check space */
- if ( p + 4 > limit )
- goto Invalid_Composite;
-
- subglyph = gloader->current.subglyphs + num_subglyphs;
-
- subglyph->arg1 = subglyph->arg2 = 0;
-
- subglyph->flags = FT_NEXT_USHORT( p );
- subglyph->index = FT_NEXT_USHORT( p );
-
- /* check space */
- count = 2;
- if ( subglyph->flags & ARGS_ARE_WORDS )
- count += 2;
- if ( subglyph->flags & WE_HAVE_A_SCALE )
- count += 2;
- else if ( subglyph->flags & WE_HAVE_AN_XY_SCALE )
- count += 4;
- else if ( subglyph->flags & WE_HAVE_A_2X2 )
- count += 8;
-
- if ( p + count > limit )
- goto Invalid_Composite;
-
- /* read arguments */
- if ( subglyph->flags & ARGS_ARE_WORDS )
- {
- subglyph->arg1 = FT_NEXT_SHORT( p );
- subglyph->arg2 = FT_NEXT_SHORT( p );
- }
- else
- {
- subglyph->arg1 = FT_NEXT_CHAR( p );
- subglyph->arg2 = FT_NEXT_CHAR( p );
- }
-
- /* read transform */
- xx = yy = 0x10000L;
- xy = yx = 0;
-
- if ( subglyph->flags & WE_HAVE_A_SCALE )
- {
- xx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
- yy = xx;
- }
- else if ( subglyph->flags & WE_HAVE_AN_XY_SCALE )
- {
- xx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
- yy = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
- }
- else if ( subglyph->flags & WE_HAVE_A_2X2 )
- {
- xx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
- yx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
- xy = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
- yy = (FT_Fixed)FT_NEXT_SHORT( p ) << 2;
- }
-
- subglyph->transform.xx = xx;
- subglyph->transform.xy = xy;
- subglyph->transform.yx = yx;
- subglyph->transform.yy = yy;
-
- num_subglyphs++;
-
- } while ( subglyph->flags & MORE_COMPONENTS );
-
- gloader->current.num_subglyphs = num_subglyphs;
-
-#ifdef TT_USE_BYTECODE_INTERPRETER
-
- {
- FT_Stream stream = loader->stream;
-
-
- /* we must undo the FT_FRAME_ENTER in order to point */
- /* to the composite instructions, if we find some. */
- /* We will process them later. */
- /* */
- loader->ins_pos = (FT_ULong)( FT_STREAM_POS() +
- p - limit );
- }
-
-#endif
-
- loader->cursor = p;
-
- Fail:
- return error;
-
- Invalid_Composite:
- error = TT_Err_Invalid_Composite;
- goto Fail;
- }
-
-
- FT_LOCAL_DEF( void )
- TT_Init_Glyph_Loading( TT_Face face )
- {
- face->access_glyph_frame = TT_Access_Glyph_Frame;
- face->read_glyph_header = TT_Load_Glyph_Header;
- face->read_simple_glyph = TT_Load_Simple_Glyph;
- face->read_composite_glyph = TT_Load_Composite_Glyph;
- face->forget_glyph_frame = TT_Forget_Glyph_Frame;
- }
-
-
- static void
- tt_prepare_zone( TT_GlyphZone zone,
- FT_GlyphLoad load,
- FT_UInt start_point,
- FT_UInt start_contour )
- {
- zone->n_points = (FT_UShort)( load->outline.n_points - start_point );
- zone->n_contours = (FT_Short) ( load->outline.n_contours -
- start_contour );
- zone->org = load->extra_points + start_point;
- zone->cur = load->outline.points + start_point;
- zone->orus = load->extra_points2 + start_point;
- zone->tags = (FT_Byte*)load->outline.tags + start_point;
- zone->contours = (FT_UShort*)load->outline.contours + start_contour;
- zone->first_point = (FT_UShort)start_point;
- }
-
-
- /*************************************************************************/
- /* */
- /* <Function> */
- /* TT_Hint_Glyph */
- /* */
- /* <Description> */
- /* Hint the glyph using the zone prepared by the caller. Note that */
- /* the zone is supposed to include four phantom points. */
- /* */
- static FT_Error
- TT_Hint_Glyph( TT_Loader loader,
- FT_Bool is_composite )
- {
- TT_GlyphZone zone = &loader->zone;
- FT_Pos origin;
-
-#ifdef TT_USE_BYTECODE_INTERPRETER
- FT_UInt n_ins;
-#else
- FT_UNUSED( is_composite );
-#endif
-
-
-#ifdef TT_USE_BYTECODE_INTERPRETER
- if ( loader->glyph->control_len > 0xFFFFL )
- {
- FT_TRACE1(( "TT_Hint_Glyph: too long instructions " ));
- FT_TRACE1(( "(0x%lx byte) is truncated\n",
- loader->glyph->control_len ));
- }
- n_ins = (FT_UInt)( loader->glyph->control_len );
-#endif
-
- origin = zone->cur[zone->n_points - 4].x;
- origin = FT_PIX_ROUND( origin ) - origin;
- if ( origin )
- translate_array( zone->n_points, zone->cur, origin, 0 );
-
-#ifdef TT_USE_BYTECODE_INTERPRETER
- /* save original point position in org */
- if ( n_ins > 0 )
- FT_ARRAY_COPY( zone->org, zone->cur, zone->n_points );
-
- /* Reset graphics state. */
- loader->exec->GS = ((TT_Size)loader->size)->GS;
-
- /* XXX: UNDOCUMENTED! Hinting instructions of a composite glyph */
- /* completely refer to the (already) hinted subglyphs. */
- if ( is_composite )
- {
- loader->exec->metrics.x_scale = 1 << 16;
- loader->exec->metrics.y_scale = 1 << 16;
-
- FT_ARRAY_COPY( zone->orus, zone->cur, zone->n_points );
- }
- else
- {
- loader->exec->metrics.x_scale =
- ((TT_Size)loader->size)->metrics.x_scale;
- loader->exec->metrics.y_scale =
- ((TT_Size)loader->size)->metrics.y_scale;
- }
-#endif
-
- /* round pp2 and pp4 */
- zone->cur[zone->n_points - 3].x =
- FT_PIX_ROUND( zone->cur[zone->n_points - 3].x );
- zone->cur[zone->n_points - 1].y =
- FT_PIX_ROUND( zone->cur[zone->n_points - 1].y );
-
-#ifdef TT_USE_BYTECODE_INTERPRETER
-
- if ( n_ins > 0 )
- {
- FT_Bool debug;
- FT_Error error;
-
- FT_GlyphLoader gloader = loader->gloader;
- FT_Outline current_outline = gloader->current.outline;
-
-
- error = TT_Set_CodeRange( loader->exec, tt_coderange_glyph,
- loader->exec->glyphIns, n_ins );
- if ( error )
- return error;
-
- loader->exec->is_composite = is_composite;
- loader->exec->pts = *zone;
-
- debug = FT_BOOL( !( loader->load_flags & FT_LOAD_NO_SCALE ) &&
- ((TT_Size)loader->size)->debug );
-
- error = TT_Run_Context( loader->exec, debug );
- if ( error && loader->exec->pedantic_hinting )
- return error;
-
- /* store drop-out mode in bits 5-7; set bit 2 also as a marker */
- current_outline.tags[0] |=
- ( loader->exec->GS.scan_type << 5 ) | FT_CURVE_TAG_HAS_SCANMODE;
- }
-
-#endif
-
- /* save glyph phantom points */
- if ( !loader->preserve_pps )
- {
- loader->pp1 = zone->cur[zone->n_points - 4];
- loader->pp2 = zone->cur[zone->n_points - 3];
- loader->pp3 = zone->cur[zone->n_points - 2];
- loader->pp4 = zone->cur[zone->n_points - 1];
- }
-
- return TT_Err_Ok;
- }
-
-
- /*************************************************************************/
- /* */
- /* <Function> */
- /* TT_Process_Simple_Glyph */
- /* */
- /* <Description> */
- /* Once a simple glyph has been loaded, it needs to be processed. */
- /* Usually, this means scaling and hinting through bytecode */
- /* interpretation. */
- /* */
- static FT_Error
- TT_Process_Simple_Glyph( TT_Loader loader )
- {
- FT_GlyphLoader gloader = loader->gloader;
- FT_Error error = TT_Err_Ok;
- FT_Outline* outline;
- FT_Int n_points;
-
-
- outline = &gloader->current.outline;
- n_points = outline->n_points;
-
- /* set phantom points */
-
- outline->points[n_points ] = loader->pp1;
- outline->points[n_points + 1] = loader->pp2;
- outline->points[n_points + 2] = loader->pp3;
- outline->points[n_points + 3] = loader->pp4;
-
- outline->tags[n_points ] = 0;
- outline->tags[n_points + 1] = 0;
- outline->tags[n_points + 2] = 0;
- outline->tags[n_points + 3] = 0;
-
- n_points += 4;
-
-#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
-
- if ( ((TT_Face)loader->face)->doblend )
- {
- /* Deltas apply to the unscaled data. */
- FT_Vector* deltas;
- FT_Memory memory = loader->face->memory;
- FT_Int i;
-
-
- error = TT_Vary_Get_Glyph_Deltas( (TT_Face)(loader->face),
- loader->glyph_index,
- &deltas,
- n_points );
- if ( error )
- return error;
-
- for ( i = 0; i < n_points; ++i )
- {
- outline->points[i].x += deltas[i].x;
- outline->points[i].y += deltas[i].y;
- }
-
- FT_FREE( deltas );
- }
-
-#endif /* TT_CONFIG_OPTION_GX_VAR_SUPPORT */
-
- if ( IS_HINTED( loader->load_flags ) )
- {
- tt_prepare_zone( &loader->zone, &gloader->current, 0, 0 );
-
- FT_ARRAY_COPY( loader->zone.orus, loader->zone.cur,
- loader->zone.n_points + 4 );
- }
-
- /* scale the glyph */
- if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
- {
- FT_Vector* vec = outline->points;
- FT_Vector* limit = outline->points + n_points;
- FT_Fixed x_scale = ((TT_Size)loader->size)->metrics.x_scale;
- FT_Fixed y_scale = ((TT_Size)loader->size)->metrics.y_scale;
-
-
- for ( ; vec < limit; vec++ )
- {
- vec->x = FT_MulFix( vec->x, x_scale );
- vec->y = FT_MulFix( vec->y, y_scale );
- }
-
- loader->pp1 = outline->points[n_points - 4];
- loader->pp2 = outline->points[n_points - 3];
- loader->pp3 = outline->points[n_points - 2];
- loader->pp4 = outline->points[n_points - 1];
- }
-
- if ( IS_HINTED( loader->load_flags ) )
- {
- loader->zone.n_points += 4;
-
- error = TT_Hint_Glyph( loader, 0 );
- }
-
- return error;
- }
-
-
- /*************************************************************************/
- /* */
- /* <Function> */
- /* TT_Process_Composite_Component */
- /* */
- /* <Description> */
- /* Once a composite component has been loaded, it needs to be */
- /* processed. Usually, this means transforming and translating. */
- /* */
- static FT_Error
- TT_Process_Composite_Component( TT_Loader loader,
- FT_SubGlyph subglyph,
- FT_UInt start_point,
- FT_UInt num_base_points )
- {
- FT_GlyphLoader gloader = loader->gloader;
- FT_Vector* base_vec = gloader->base.outline.points;
- FT_UInt num_points = gloader->base.outline.n_points;
- FT_Bool have_scale;
- FT_Pos x, y;
-
-
- have_scale = FT_BOOL( subglyph->flags & ( WE_HAVE_A_SCALE |
- WE_HAVE_AN_XY_SCALE |
- WE_HAVE_A_2X2 ) );
-
- /* perform the transform required for this subglyph */
- if ( have_scale )
- {
- FT_UInt i;
-
-
- for ( i = num_base_points; i < num_points; i++ )
- FT_Vector_Transform( base_vec + i, &subglyph->transform );
- }
-
- /* get offset */
- if ( !( subglyph->flags & ARGS_ARE_XY_VALUES ) )
- {
- FT_UInt k = subglyph->arg1;
- FT_UInt l = subglyph->arg2;
- FT_Vector* p1;
- FT_Vector* p2;
-
-
- /* match l-th point of the newly loaded component to the k-th point */
- /* of the previously loaded components. */
-
- /* change to the point numbers used by our outline */
- k += start_point;
- l += num_base_points;
- if ( k >= num_base_points ||
- l >= num_points )
- return TT_Err_Invalid_Composite;
-
- p1 = gloader->base.outline.points + k;
- p2 = gloader->base.outline.points + l;
-
- x = p1->x - p2->x;
- y = p1->y - p2->y;
- }
- else
- {
- x = subglyph->arg1;
- y = subglyph->arg2;
-
- if ( !x && !y )
- return TT_Err_Ok;
-
- /* Use a default value dependent on */
- /* TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED. This is useful for old TT */
- /* fonts which don't set the xxx_COMPONENT_OFFSET bit. */
-
- if ( have_scale &&
-#ifdef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED
- !( subglyph->flags & UNSCALED_COMPONENT_OFFSET ) )
-#else
- ( subglyph->flags & SCALED_COMPONENT_OFFSET ) )
-#endif
- {
-
-#if 0
-
- /*************************************************************************/
- /* */
- /* This algorithm is what Apple documents. But it doesn't work. */
- /* */
- int a = subglyph->transform.xx > 0 ? subglyph->transform.xx
- : -subglyph->transform.xx;
- int b = subglyph->transform.yx > 0 ? subglyph->transform.yx
- : -subglyph->transform.yx;
- int c = subglyph->transform.xy > 0 ? subglyph->transform.xy
- : -subglyph->transform.xy;
- int d = subglyph->transform.yy > 0 ? subglyph->transform.yy
- : -subglyph->transform.yy;
- int m = a > b ? a : b;
- int n = c > d ? c : d;
-
-
- if ( a - b <= 33 && a - b >= -33 )
- m *= 2;
- if ( c - d <= 33 && c - d >= -33 )
- n *= 2;
- x = FT_MulFix( x, m );
- y = FT_MulFix( y, n );
-
-#else /* 0 */
-
- /*************************************************************************/
- /* */
- /* This algorithm is a guess and works much better than the above. */
- /* */
- FT_Fixed mac_xscale = FT_SqrtFixed(
- (FT_Int32)FT_MulFix( subglyph->transform.xx,
- subglyph->transform.xx ) +
- (FT_Int32)FT_MulFix( subglyph->transform.xy,
- subglyph->transform.xy ) );
- FT_Fixed mac_yscale = FT_SqrtFixed(
- (FT_Int32)FT_MulFix( subglyph->transform.yy,
- subglyph->transform.yy ) +
- (FT_Int32)FT_MulFix( subglyph->transform.yx,
- subglyph->transform.yx ) );
-
-
- x = FT_MulFix( x, mac_xscale );
- y = FT_MulFix( y, mac_yscale );
-
-#endif /* 0 */
-
- }
-
- if ( !( loader->load_flags & FT_LOAD_NO_SCALE ) )
- {
- FT_Fixed x_scale = ((TT_Size)loader->size)->metrics.x_scale;
- FT_Fixed y_scale = ((TT_Size)loader->size)->metrics.y_scale;
-
-
- x = FT_MulFix( x, x_scale );
- y = FT_MulFix( y, y_scale );
-
- if ( subglyph->flags & ROUND_XY_TO_GRID )
- {
- x = FT_PIX_ROUND( x );
- y = FT_PIX_ROUND( y );
- }
- }
- }
-
- if ( x || y )
- translate_array( num_points - num_base_points,
- base_vec + num_base_points,
- x, y );
-
- return TT_Err_Ok;
- }
-
-
- /*************************************************************************/
- /* */
- /* <Function> */
- /* TT_Process_Composite_Glyph */
- /* */
- /* <Description> */
- /* This is slightly different from TT_Process_Simple_Glyph, in that */
- /* its sole purpose is to hint the glyph. Thus this function is */
- /* only available when bytecode interpreter is enabled. */
- /* */
- static FT_Error
- TT_Process_Composite_Glyph( TT_Loader loader,
- FT_UInt start_point,
- FT_UInt start_contour )
- {
- FT_Error error;
- FT_Outline* outline;
- FT_UInt i;
-
-
- outline = &loader->gloader->base.outline;
-
- /* make room for phantom points */
- error = FT_GLYPHLOADER_CHECK_POINTS( loader->gloader,
- outline->n_points + 4,
- 0 );
- if ( error )
- return error;
-
- outline->points[outline->n_points ] = loader->pp1;
- outline->points[outline->n_points + 1] = loader->pp2;
- outline->points[outline->n_points + 2] = loader->pp3;
- outline->points[outline->n_points + 3] = loader->pp4;
-
- outline->tags[outline->n_points ] = 0;
- outline->tags[outline->n_points + 1] = 0;
- outline->tags[outline->n_points + 2] = 0;
- outline->tags[outline->n_points + 3] = 0;
-
-#ifdef TT_USE_BYTECODE_INTERPRETER
-
- {
- FT_Stream stream = loader->stream;
- FT_UShort n_ins, max_ins;
- FT_ULong tmp;
-
-
- /* TT_Load_Composite_Glyph only gives us the offset of instructions */
- /* so we read them here */
- if ( FT_STREAM_SEEK( loader->ins_pos ) ||
- FT_READ_USHORT( n_ins ) )
- return error;
-
- FT_TRACE5(( " Instructions size = %d\n", n_ins ));
-
- /* check it */
- max_ins = ((TT_Face)loader->face)->max_profile.maxSizeOfInstructions;
- if ( n_ins > max_ins )
- {
- /* acroread ignores this field, so we only do a rough safety check */
- if ( (FT_Int)n_ins > loader->byte_len )
- {
- FT_TRACE1(( "TT_Process_Composite_Glyph: "
- "too many instructions (%d) for glyph with length %d\n",
- n_ins, loader->byte_len ));
- return TT_Err_Too_Many_Hints;
- }
-
- tmp = loader->exec->glyphSize;
- error = Update_Max( loader->exec->memory,
- &tmp,
- sizeof ( FT_Byte ),
- (void*)&loader->exec->glyphIns,
- n_ins );
- loader->exec->glyphSize = (FT_UShort)tmp;
- if ( error )
- return error;
- }
- else if ( n_ins == 0 )
- return TT_Err_Ok;
-
- if ( FT_STREAM_READ( loader->exec->glyphIns, n_ins ) )
- return error;
-
- loader->glyph->control_data = loader->exec->glyphIns;
- loader->glyph->control_len = n_ins;
- }
-
-#endif
-
- tt_prepare_zone( &loader->zone, &loader->gloader->base,
- start_point, start_contour );
-
- /* Some points are likely touched during execution of */
- /* instructions on components. So let's untouch them. */
- for ( i = start_point; i < loader->zone.n_points; i++ )
- loader->zone.tags[i] &= ~FT_CURVE_TAG_TOUCH_BOTH;
-
- loader->zone.n_points += 4;
-
- return TT_Hint_Glyph( loader, 1 );
- }
-
-
- /* Calculate the four phantom points. */
- /* The first two stand for horizontal origin and advance. */
- /* The last two stand for vertical origin and advance. */
-#define TT_LOADER_SET_PP( loader ) \
- do { \
- (loader)->pp1.x = (loader)->bbox.xMin - (loader)->left_bearing; \
- (loader)->pp1.y = 0; \
- (loader)->pp2.x = (loader)->pp1.x + (loader)->advance; \
- (loader)->pp2.y = 0; \
- (loader)->pp3.x = 0; \
- (loader)->pp3.y = (loader)->top_bearing + (loader)->bbox.yMax; \
- (loader)->pp4.x = 0; \
- (loader)->pp4.y = (loader)->pp3.y - (loader)->vadvance; \
- } while ( 0 )
-
-
- /*************************************************************************/
- /* */
- /* <Function> */
- /* load_truetype_glyph */
- /* */
- /* <Description> */
- /* Loads a given truetype glyph. Handles composites and uses a */
- /* TT_Loader object. */
- /* */
- static FT_Error
- load_truetype_glyph( TT_Loader loader,
- FT_UInt glyph_index,
- FT_UInt recurse_count,
- FT_Bool header_only )
- {
- FT_Error error = TT_Err_Ok;
- FT_Fixed x_scale, y_scale;
- FT_ULong offset;
- TT_Face face = (TT_Face)loader->face;
- FT_GlyphLoader gloader = loader->gloader;
- FT_Bool opened_frame = 0;
-
-#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
- FT_Vector* deltas = NULL;
-#endif
-
-#ifdef FT_CONFIG_OPTION_INCREMENTAL
- FT_StreamRec inc_stream;
- FT_Data glyph_data;
- FT_Bool glyph_data_loaded = 0;
-#endif
-
-
- /* some fonts have an incorrect value of `maxComponentDepth', */
- /* thus we allow depth 1 to catch the majority of them */
- if ( recurse_count > 1 &&
- recurse_count > face->max_profile.maxComponentDepth )
- {
- error = TT_Err_Invalid_Composite;
- goto Exit;
- }
-
- /* check glyph index */
- if ( glyph_index >= (FT_UInt)face->root.num_glyphs )
- {
- error = TT_Err_Invalid_Glyph_Index;
- goto Exit;
- }
-
- loader->glyph_index = glyph_index;
-
- if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
- {
- x_scale = ((TT_Size)loader->size)->metrics.x_scale;
- y_scale = ((TT_Size)loader->size)->metrics.y_scale;
- }
- else
- {
- x_scale = 0x10000L;
- y_scale = 0x10000L;
- }
-
- tt_get_metrics( loader, glyph_index );
-
- /* Set `offset' to the start of the glyph relative to the start of */
- /* the `glyf' table, and `byte_len' to the length of the glyph in */
- /* bytes. */
-
-#ifdef FT_CONFIG_OPTION_INCREMENTAL
-
- /* If we are loading glyph data via the incremental interface, set */
- /* the loader stream to a memory stream reading the data returned */
- /* by the interface. */
- if ( face->root.internal->incremental_interface )
- {
- error = face->root.internal->incremental_interface->funcs->get_glyph_data(
- face->root.internal->incremental_interface->object,
- glyph_index, &glyph_data );
- if ( error )
- goto Exit;
-
- glyph_data_loaded = 1;
- offset = 0;
- loader->byte_len = glyph_data.length;
-
- FT_MEM_ZERO( &inc_stream, sizeof ( inc_stream ) );
- FT_Stream_OpenMemory( &inc_stream,
- glyph_data.pointer, glyph_data.length );
-
- loader->stream = &inc_stream;
- }
- else
-
-#endif /* FT_CONFIG_OPTION_INCREMENTAL */
-
- offset = tt_face_get_location( face, glyph_index,
- (FT_UInt*)&loader->byte_len );
-
- if ( loader->byte_len > 0 )
- {
-#ifdef FT_CONFIG_OPTION_INCREMENTAL
- /* for the incremental interface, `glyf_offset' is always zero */
- if ( !loader->glyf_offset &&
- !face->root.internal->incremental_interface )
-#else
- if ( !loader->glyf_offset )
-#endif /* FT_CONFIG_OPTION_INCREMENTAL */
- {
- FT_TRACE2(( "no `glyf' table but non-zero `loca' entry\n" ));
- error = TT_Err_Invalid_Table;
- goto Exit;
- }
-
- error = face->access_glyph_frame( loader, glyph_index,
- loader->glyf_offset + offset,
- loader->byte_len );
- if ( error )
- goto Exit;
-
- opened_frame = 1;
-
- /* read glyph header first */
- error = face->read_glyph_header( loader );
- if ( error || header_only )
- goto Exit;
- }
-
- if ( loader->byte_len == 0 || loader->n_contours == 0 )
- {
- loader->bbox.xMin = 0;
- loader->bbox.xMax = 0;
- loader->bbox.yMin = 0;
- loader->bbox.yMax = 0;
-
- if ( header_only )
- goto Exit;
-
- /* must initialize points before (possibly) overriding */
- /* glyph metrics from the incremental interface */
- TT_LOADER_SET_PP( loader );
-
-#ifdef FT_CONFIG_OPTION_INCREMENTAL
- tt_get_metrics_incr_overrides( loader, glyph_index );
-#endif
-
-#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
-
- if ( ((TT_Face)(loader->face))->doblend )
- {
- /* this must be done before scaling */
- FT_Memory memory = loader->face->memory;
-
-
- error = TT_Vary_Get_Glyph_Deltas( (TT_Face)(loader->face),
- glyph_index, &deltas, 4 );
- if ( error )
- goto Exit;
-
- loader->pp1.x += deltas[0].x; loader->pp1.y += deltas[0].y;
- loader->pp2.x += deltas[1].x; loader->pp2.y += deltas[1].y;
- loader->pp3.x += deltas[2].x; loader->pp3.y += deltas[2].y;
- loader->pp4.x += deltas[3].x; loader->pp4.y += deltas[3].y;
-
- FT_FREE( deltas );
- }
-
-#endif
-
- if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
- {
- loader->pp1.x = FT_MulFix( loader->pp1.x, x_scale );
- loader->pp2.x = FT_MulFix( loader->pp2.x, x_scale );
- loader->pp3.y = FT_MulFix( loader->pp3.y, y_scale );
- loader->pp4.y = FT_MulFix( loader->pp4.y, y_scale );
- }
-
- error = TT_Err_Ok;
- goto Exit;
- }
-
- /* must initialize points before (possibly) overriding */
- /* glyph metrics from the incremental interface */
- TT_LOADER_SET_PP( loader );
-
-#ifdef FT_CONFIG_OPTION_INCREMENTAL
- tt_get_metrics_incr_overrides( loader, glyph_index );
-#endif
-
- /***********************************************************************/
- /***********************************************************************/
- /***********************************************************************/
-
- /* if it is a simple glyph, load it */
-
- if ( loader->n_contours > 0 )
- {
- error = face->read_simple_glyph( loader );
- if ( error )
- goto Exit;
-
- /* all data have been read */
- face->forget_glyph_frame( loader );
- opened_frame = 0;
-
- error = TT_Process_Simple_Glyph( loader );
- if ( error )
- goto Exit;
-
- FT_GlyphLoader_Add( gloader );
- }
-
- /***********************************************************************/
- /***********************************************************************/
- /***********************************************************************/
-
- /* otherwise, load a composite! */
- else if ( loader->n_contours == -1 )
- {
- FT_UInt start_point;
- FT_UInt start_contour;
- FT_ULong ins_pos; /* position of composite instructions, if any */
-
-
- start_point = gloader->base.outline.n_points;
- start_contour = gloader->base.outline.n_contours;
-
- /* for each subglyph, read composite header */
- error = face->read_composite_glyph( loader );
- if ( error )
- goto Exit;
-
- /* store the offset of instructions */
- ins_pos = loader->ins_pos;
-
- /* all data we need are read */
- face->forget_glyph_frame( loader );
- opened_frame = 0;
-
-#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
-
- if ( face->doblend )
- {
- FT_Int i, limit;
- FT_SubGlyph subglyph;
- FT_Memory memory = face->root.memory;
-
-
- /* this provides additional offsets */
- /* for each component's translation */
-
- if ( ( error = TT_Vary_Get_Glyph_Deltas(
- face,
- glyph_index,
- &deltas,
- gloader->current.num_subglyphs + 4 )) != 0 )
- goto Exit;
-
- subglyph = gloader->current.subglyphs + gloader->base.num_subglyphs;
- limit = gloader->current.num_subglyphs;
-
- for ( i = 0; i < limit; ++i, ++subglyph )
- {
- if ( subglyph->flags & ARGS_ARE_XY_VALUES )
- {
- /* XXX: overflow check for subglyph->{arg1,arg2}. */
- /* deltas[i].{x,y} must be within signed 16-bit, */
- /* but the restriction of summed delta is not clear */
- subglyph->arg1 += (FT_Int16)deltas[i].x;
- subglyph->arg2 += (FT_Int16)deltas[i].y;
- }
- }
-
- loader->pp1.x += deltas[i + 0].x; loader->pp1.y += deltas[i + 0].y;
- loader->pp2.x += deltas[i + 1].x; loader->pp2.y += deltas[i + 1].y;
- loader->pp3.x += deltas[i + 2].x; loader->pp3.y += deltas[i + 2].y;
- loader->pp4.x += deltas[i + 3].x; loader->pp4.y += deltas[i + 3].y;
-
- FT_FREE( deltas );
- }
-
-#endif /* TT_CONFIG_OPTION_GX_VAR_SUPPORT */
-
- if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
- {
- loader->pp1.x = FT_MulFix( loader->pp1.x, x_scale );
- loader->pp2.x = FT_MulFix( loader->pp2.x, x_scale );
- loader->pp3.y = FT_MulFix( loader->pp3.y, y_scale );
- loader->pp4.y = FT_MulFix( loader->pp4.y, y_scale );
- }
-
- /* if the flag FT_LOAD_NO_RECURSE is set, we return the subglyph */
- /* `as is' in the glyph slot (the client application will be */
- /* responsible for interpreting these data)... */
- if ( loader->load_flags & FT_LOAD_NO_RECURSE )
- {
- FT_GlyphLoader_Add( gloader );
- loader->glyph->format = FT_GLYPH_FORMAT_COMPOSITE;
-
- goto Exit;
- }
-
- /*********************************************************************/
- /*********************************************************************/
- /*********************************************************************/
-
- {
- FT_UInt n, num_base_points;
- FT_SubGlyph subglyph = 0;
-
- FT_UInt num_points = start_point;
- FT_UInt num_subglyphs = gloader->current.num_subglyphs;
- FT_UInt num_base_subgs = gloader->base.num_subglyphs;
-
- FT_Stream old_stream = loader->stream;
- FT_Int old_byte_len = loader->byte_len;
-
-
- FT_GlyphLoader_Add( gloader );
-
- /* read each subglyph independently */
- for ( n = 0; n < num_subglyphs; n++ )
- {
- FT_Vector pp[4];
-
-
- /* Each time we call load_truetype_glyph in this loop, the */
- /* value of `gloader.base.subglyphs' can change due to table */
- /* reallocations. We thus need to recompute the subglyph */
- /* pointer on each iteration. */
- subglyph = gloader->base.subglyphs + num_base_subgs + n;
-
- pp[0] = loader->pp1;
- pp[1] = loader->pp2;
- pp[2] = loader->pp3;
- pp[3] = loader->pp4;
-
- num_base_points = gloader->base.outline.n_points;
-
- error = load_truetype_glyph( loader, subglyph->index,
- recurse_count + 1, FALSE );
- if ( error )
- goto Exit;
-
- /* restore subglyph pointer */
- subglyph = gloader->base.subglyphs + num_base_subgs + n;
-
- if ( !( subglyph->flags & USE_MY_METRICS ) )
- {
- loader->pp1 = pp[0];
- loader->pp2 = pp[1];
- loader->pp3 = pp[2];
- loader->pp4 = pp[3];
- }
-
- num_points = gloader->base.outline.n_points;
-
- if ( num_points == num_base_points )
- continue;
-
- /* gloader->base.outline consists of three parts: */
- /* 0 -(1)-> start_point -(2)-> num_base_points -(3)-> n_points. */
- /* */
- /* (1): exists from the beginning */
- /* (2): components that have been loaded so far */
- /* (3): the newly loaded component */
- TT_Process_Composite_Component( loader, subglyph, start_point,
- num_base_points );
- }
-
- loader->stream = old_stream;
- loader->byte_len = old_byte_len;
-
- /* process the glyph */
- loader->ins_pos = ins_pos;
- if ( IS_HINTED( loader->load_flags ) &&
-
-#ifdef TT_USE_BYTECODE_INTERPRETER
-
- subglyph->flags & WE_HAVE_INSTR &&
-
-#endif
-
- num_points > start_point )
- TT_Process_Composite_Glyph( loader, start_point, start_contour );
-
- }
- }
- else
- {
- /* invalid composite count (negative but not -1) */
- error = TT_Err_Invalid_Outline;
- goto Exit;
- }
-
- /***********************************************************************/
- /***********************************************************************/
- /***********************************************************************/
-
- Exit:
-
- if ( opened_frame )
- face->forget_glyph_frame( loader );
-
-#ifdef FT_CONFIG_OPTION_INCREMENTAL
-
- if ( glyph_data_loaded )
- face->root.internal->incremental_interface->funcs->free_glyph_data(
- face->root.internal->incremental_interface->object,
- &glyph_data );
-
-#endif
-
- return error;
- }
-
-
- static FT_Error
- compute_glyph_metrics( TT_Loader loader,
- FT_UInt glyph_index )
- {
- FT_BBox bbox;
- TT_Face face = (TT_Face)loader->face;
- FT_Fixed y_scale;
- TT_GlyphSlot glyph = loader->glyph;
- TT_Size size = (TT_Size)loader->size;
-
-
- y_scale = 0x10000L;
- if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 )
- y_scale = size->root.metrics.y_scale;
-
- if ( glyph->format != FT_GLYPH_FORMAT_COMPOSITE )
- FT_Outline_Get_CBox( &glyph->outline, &bbox );
- else
- bbox = loader->bbox;
-
- /* get the device-independent horizontal advance; it is scaled later */
- /* by the base layer. */
- glyph->linearHoriAdvance = loader->linear;
-
- glyph->metrics.horiBearingX = bbox.xMin;
- glyph->metrics.horiBearingY = bbox.yMax;
- glyph->metrics.horiAdvance = loader->pp2.x - loader->pp1.x;
-
- /* adjust advance width to the value contained in the hdmx table */
- if ( !face->postscript.isFixedPitch &&
- IS_HINTED( loader->load_flags ) )
- {
- FT_Byte* widthp;
-
-
- widthp = tt_face_get_device_metrics( face,
- size->root.metrics.x_ppem,
- glyph_index );
-
- if ( widthp )
- glyph->metrics.horiAdvance = *widthp << 6;
- }
-
- /* set glyph dimensions */
- glyph->metrics.width = bbox.xMax - bbox.xMin;
- glyph->metrics.height = bbox.yMax - bbox.yMin;
-
- /* Now take care of vertical metrics. In the case where there is */
- /* no vertical information within the font (relatively common), */
- /* create some metrics manually */
- {
- FT_Pos top; /* scaled vertical top side bearing */
- FT_Pos advance; /* scaled vertical advance height */
-
-
- /* Get the unscaled top bearing and advance height. */
- if ( face->vertical_info &&
- face->vertical.number_Of_VMetrics > 0 )
- {
- top = (FT_Short)FT_DivFix( loader->pp3.y - bbox.yMax,
- y_scale );
-
- if ( loader->pp3.y <= loader->pp4.y )
- advance = 0;
- else
- advance = (FT_UShort)FT_DivFix( loader->pp3.y - loader->pp4.y,
- y_scale );
- }
- else
- {
- FT_Pos height;
-
-
- /* XXX Compute top side bearing and advance height in */
- /* Get_VMetrics instead of here. */
-
- /* NOTE: The OS/2 values are the only `portable' ones, */
- /* which is why we use them, if there is an OS/2 */
- /* table in the font. Otherwise, we use the */
- /* values defined in the horizontal header. */
-
- height = (FT_Short)FT_DivFix( bbox.yMax - bbox.yMin,
- y_scale );
- if ( face->os2.version != 0xFFFFU )
- advance = (FT_Pos)( face->os2.sTypoAscender -
- face->os2.sTypoDescender );
- else
- advance = (FT_Pos)( face->horizontal.Ascender -
- face->horizontal.Descender );
-
- top = ( advance - height ) / 2;
- }
-
-#ifdef FT_CONFIG_OPTION_INCREMENTAL
- {
- FT_Incremental_InterfaceRec* incr;
- FT_Incremental_MetricsRec metrics;
- FT_Error error;
-
-
- incr = face->root.internal->incremental_interface;
-
- /* If this is an incrementally loaded font see if there are */
- /* overriding metrics for this glyph. */
- if ( incr && incr->funcs->get_glyph_metrics )
- {
- metrics.bearing_x = 0;
- metrics.bearing_y = top;
- metrics.advance = advance;
-
- error = incr->funcs->get_glyph_metrics( incr->object,
- glyph_index,
- TRUE,
- &metrics );
- if ( error )
- return error;
-
- top = metrics.bearing_y;
- advance = metrics.advance;
- }
- }
-
- /* GWW: Do vertical metrics get loaded incrementally too? */
-
-#endif /* FT_CONFIG_OPTION_INCREMENTAL */
-
- glyph->linearVertAdvance = advance;
-
- /* scale the metrics */
- if ( !( loader->load_flags & FT_LOAD_NO_SCALE ) )
- {
- top = FT_MulFix( top, y_scale );
- advance = FT_MulFix( advance, y_scale );
- }
-
- /* XXX: for now, we have no better algorithm for the lsb, but it */
- /* should work fine. */
- /* */
- glyph->metrics.vertBearingX = glyph->metrics.horiBearingX -
- glyph->metrics.horiAdvance / 2;
- glyph->metrics.vertBearingY = top;
- glyph->metrics.vertAdvance = advance;
- }
-
- return 0;
- }
-
-
-#ifdef TT_CONFIG_OPTION_EMBEDDED_BITMAPS
-
- static FT_Error
- load_sbit_image( TT_Size size,
- TT_GlyphSlot glyph,
- FT_UInt glyph_index,
- FT_Int32 load_flags )
- {
- TT_Face face;
- SFNT_Service sfnt;
- FT_Stream stream;
- FT_Error error;
- TT_SBit_MetricsRec metrics;
-
-
- face = (TT_Face)glyph->face;
- sfnt = (SFNT_Service)face->sfnt;
- stream = face->root.stream;
-
- error = sfnt->load_sbit_image( face,
- size->strike_index,
- glyph_index,
- (FT_Int)load_flags,
- stream,
- &glyph->bitmap,
- &metrics );
- if ( !error )
- {
- glyph->outline.n_points = 0;
- glyph->outline.n_contours = 0;
-
- glyph->metrics.width = (FT_Pos)metrics.width << 6;
- glyph->metrics.height = (FT_Pos)metrics.height << 6;
-
- glyph->metrics.horiBearingX = (FT_Pos)metrics.horiBearingX << 6;
- glyph->metrics.horiBearingY = (FT_Pos)metrics.horiBearingY << 6;
- glyph->metrics.horiAdvance = (FT_Pos)metrics.horiAdvance << 6;
-
- glyph->metrics.vertBearingX = (FT_Pos)metrics.vertBearingX << 6;
- glyph->metrics.vertBearingY = (FT_Pos)metrics.vertBearingY << 6;
- glyph->metrics.vertAdvance = (FT_Pos)metrics.vertAdvance << 6;
-
- glyph->format = FT_GLYPH_FORMAT_BITMAP;
-
- if ( load_flags & FT_LOAD_VERTICAL_LAYOUT )
- {
- glyph->bitmap_left = metrics.vertBearingX;
- glyph->bitmap_top = metrics.vertBearingY;
- }
- else
- {
- glyph->bitmap_left = metrics.horiBearingX;
- glyph->bitmap_top = metrics.horiBearingY;
- }
- }
-
- return error;
- }
-
-#endif /* TT_CONFIG_OPTION_EMBEDDED_BITMAPS */
-
-
- static FT_Error
- tt_loader_init( TT_Loader loader,
- TT_Size size,
- TT_GlyphSlot glyph,
- FT_Int32 load_flags,
- FT_Bool glyf_table_only )
- {
- TT_Face face;
- FT_Stream stream;
- FT_Bool pedantic = FT_BOOL( load_flags & FT_LOAD_PEDANTIC );
-
-
- face = (TT_Face)glyph->face;
- stream = face->root.stream;
-
- FT_MEM_ZERO( loader, sizeof ( TT_LoaderRec ) );
-
-#ifdef TT_USE_BYTECODE_INTERPRETER
-
- /* load execution context */
- if ( IS_HINTED( load_flags ) && !glyf_table_only )
- {
- TT_ExecContext exec;
- FT_Bool grayscale;
-
-
- if ( !size->cvt_ready )
- {
- FT_Error error = tt_size_ready_bytecode( size, pedantic );
-
-
- if ( error )
- return error;
- }
-
- /* query new execution context */
- exec = size->debug ? size->context
- : ( (TT_Driver)FT_FACE_DRIVER( face ) )->context;
- if ( !exec )
- return TT_Err_Could_Not_Find_Context;
-
- grayscale =
- FT_BOOL( FT_LOAD_TARGET_MODE( load_flags ) != FT_RENDER_MODE_MONO );
-
- TT_Load_Context( exec, face, size );
-
- /* a change from mono to grayscale rendering (and vice versa) */
- /* requires a re-execution of the CVT program */
- if ( grayscale != exec->grayscale )
- {
- FT_UInt i;
-
-
- FT_TRACE4(( "tt_loader_init: grayscale change,"
- " re-executing `prep' table\n" ));
-
- exec->grayscale = grayscale;
-
- for ( i = 0; i < size->cvt_size; i++ )
- size->cvt[i] = FT_MulFix( face->cvt[i], size->ttmetrics.scale );
- tt_size_run_prep( size, pedantic );
- }
-
- /* see whether the cvt program has disabled hinting */
- if ( exec->GS.instruct_control & 1 )
- load_flags |= FT_LOAD_NO_HINTING;
-
- /* load default graphics state -- if needed */
- if ( exec->GS.instruct_control & 2 )
- exec->GS = tt_default_graphics_state;
-
- exec->pedantic_hinting = FT_BOOL( load_flags & FT_LOAD_PEDANTIC );
- loader->exec = exec;
- loader->instructions = exec->glyphIns;
- }
-
-#endif /* TT_USE_BYTECODE_INTERPRETER */
-
- /* seek to the beginning of the glyph table -- for Type 42 fonts */
- /* the table might be accessed from a Postscript stream or something */
- /* else... */
-
-#ifdef FT_CONFIG_OPTION_INCREMENTAL
-
- if ( face->root.internal->incremental_interface )
- loader->glyf_offset = 0;
- else
-
-#endif
-
- {
- FT_Error error = face->goto_table( face, TTAG_glyf, stream, 0 );
-
-
- if ( error == TT_Err_Table_Missing )
- loader->glyf_offset = 0;
- else if ( error )
- {
- FT_ERROR(( "tt_loader_init: could not access glyph table\n" ));
- return error;
- }
- else
- loader->glyf_offset = FT_STREAM_POS();
- }
-
- /* get face's glyph loader */
- if ( !glyf_table_only )
- {
- FT_GlyphLoader gloader = glyph->internal->loader;
-
-
- FT_GlyphLoader_Rewind( gloader );
- loader->gloader = gloader;
- }
-
- loader->load_flags = load_flags;
-
- loader->face = (FT_Face)face;
- loader->size = (FT_Size)size;
- loader->glyph = (FT_GlyphSlot)glyph;
- loader->stream = stream;
-
- return TT_Err_Ok;
- }
-
-
- /*************************************************************************/
- /* */
- /* <Function> */
- /* TT_Load_Glyph */
- /* */
- /* <Description> */
- /* A function used to load a single glyph within a given glyph slot, */
- /* for a given size. */
- /* */
- /* <Input> */
- /* glyph :: A handle to a target slot object where the glyph */
- /* will be loaded. */
- /* */
- /* size :: A handle to the source face size at which the glyph */
- /* must be scaled/loaded. */
- /* */
- /* glyph_index :: The index of the glyph in the font file. */
- /* */
- /* load_flags :: A flag indicating what to load for this glyph. The */
- /* FT_LOAD_XXX constants can be used to control the */
- /* glyph loading process (e.g., whether the outline */
- /* should be scaled, whether to load bitmaps or not, */
- /* whether to hint the outline, etc). */
- /* */
- /* <Return> */
- /* FreeType error code. 0 means success. */
- /* */
- FT_LOCAL_DEF( FT_Error )
- TT_Load_Glyph( TT_Size size,
- TT_GlyphSlot glyph,
- FT_UInt glyph_index,
- FT_Int32 load_flags )
- {
- TT_Face face;
- FT_Error error;
- TT_LoaderRec loader;
-
-
- face = (TT_Face)glyph->face;
- error = TT_Err_Ok;
-
-#ifdef TT_CONFIG_OPTION_EMBEDDED_BITMAPS
-
- /* try to load embedded bitmap if any */
- /* */
- /* XXX: The convention should be emphasized in */
- /* the documents because it can be confusing. */
- if ( size->strike_index != 0xFFFFFFFFUL &&
- ( load_flags & FT_LOAD_NO_BITMAP ) == 0 )
- {
- error = load_sbit_image( size, glyph, glyph_index, load_flags );
- if ( !error )
- {
- FT_Face root = &face->root;
-
-
- if ( FT_IS_SCALABLE( root ) )
- {
- /* for the bbox we need the header only */
- (void)tt_loader_init( &loader, size, glyph, load_flags, TRUE );
- (void)load_truetype_glyph( &loader, glyph_index, 0, TRUE );
- glyph->linearHoriAdvance = loader.linear;
- glyph->linearVertAdvance = loader.top_bearing + loader.bbox.yMax -
- loader.vadvance;
- }
-
- return TT_Err_Ok;
- }
- }
-
-#endif /* TT_CONFIG_OPTION_EMBEDDED_BITMAPS */
-
- /* if FT_LOAD_NO_SCALE is not set, `ttmetrics' must be valid */
- if ( !( load_flags & FT_LOAD_NO_SCALE ) && !size->ttmetrics.valid )
- return TT_Err_Invalid_Size_Handle;
-
- if ( load_flags & FT_LOAD_SBITS_ONLY )
- return TT_Err_Invalid_Argument;
-
- error = tt_loader_init( &loader, size, glyph, load_flags, FALSE );
- if ( error )
- return error;
-
- glyph->format = FT_GLYPH_FORMAT_OUTLINE;
- glyph->num_subglyphs = 0;
- glyph->outline.flags = 0;
-
- /* main loading loop */
- error = load_truetype_glyph( &loader, glyph_index, 0, FALSE );
- if ( !error )
- {
- if ( glyph->format == FT_GLYPH_FORMAT_COMPOSITE )
- {
- glyph->num_subglyphs = loader.gloader->base.num_subglyphs;
- glyph->subglyphs = loader.gloader->base.subglyphs;
- }
- else
- {
- glyph->outline = loader.gloader->base.outline;
- glyph->outline.flags &= ~FT_OUTLINE_SINGLE_PASS;
-
- /* Translate array so that (0,0) is the glyph's origin. Note */
- /* that this behaviour is independent on the value of bit 1 of */
- /* the `flags' field in the `head' table -- at least major */
- /* applications like Acroread indicate that. */
- if ( loader.pp1.x )
- FT_Outline_Translate( &glyph->outline, -loader.pp1.x, 0 );
- }
-
-#ifdef TT_USE_BYTECODE_INTERPRETER
-
- if ( IS_HINTED( load_flags ) )
- {
- if ( loader.exec->GS.scan_control )
- {
- /* convert scan conversion mode to FT_OUTLINE_XXX flags */
- switch ( loader.exec->GS.scan_type )
- {
- case 0: /* simple drop-outs including stubs */
- glyph->outline.flags |= FT_OUTLINE_INCLUDE_STUBS;
- break;
- case 1: /* simple drop-outs excluding stubs */
- /* nothing; it's the default rendering mode */
- break;
- case 4: /* smart drop-outs including stubs */
- glyph->outline.flags |= FT_OUTLINE_SMART_DROPOUTS |
- FT_OUTLINE_INCLUDE_STUBS;
- break;
- case 5: /* smart drop-outs excluding stubs */
- glyph->outline.flags |= FT_OUTLINE_SMART_DROPOUTS;
- break;
-
- default: /* no drop-out control */
- glyph->outline.flags |= FT_OUTLINE_IGNORE_DROPOUTS;
- break;
- }
- }
- else
- glyph->outline.flags |= FT_OUTLINE_IGNORE_DROPOUTS;
- }
-
-#endif /* TT_USE_BYTECODE_INTERPRETER */
-
- compute_glyph_metrics( &loader, glyph_index );
- }
-
- /* Set the `high precision' bit flag. */
- /* This is _critical_ to get correct output for monochrome */
- /* TrueType glyphs at all sizes using the bytecode interpreter. */
- /* */
- if ( !( load_flags & FT_LOAD_NO_SCALE ) &&
- size->root.metrics.y_ppem < 24 )
- glyph->outline.flags |= FT_OUTLINE_HIGH_PRECISION;
-
- return error;
- }
-
-
-/* END */