hedgewars/CMakeLists.txt
branchwebgl
changeset 9236 ddd675825672
parent 9160 fc46e75f6b72
parent 9230 035cc97de6aa
child 9244 bb95e351270c
--- a/hedgewars/CMakeLists.txt	Mon Jun 17 22:54:17 2013 +0200
+++ b/hedgewars/CMakeLists.txt	Mon Jun 17 23:10:45 2013 +0200
@@ -5,121 +5,82 @@
 find_package(SDL_mixer)
 
 include (CheckLibraryExists)
-#Mix_Init/Mix_Quit from SDL_mixer 1.2.10
-check_library_exists(${SDLMIXER_LIBRARY} Mix_Init "" HAVE_MIXINIT)
-if(HAVE_MIXINIT)
-    list(APPEND pascal_flags "-dSDL_MIXER_NEWER")
-endif()
-#IMG_Init/IMG_Quit from SDL_image 1.2.8
-check_library_exists(${SDLIMAGE_LIBRARY} IMG_Init "" HAVE_IMGINIT)
-if(HAVE_IMGINIT)
-    list(APPEND pascal_flags "-dSDL_IMAGE_NEWER")
-endif()
+
+
+enable_language(Pascal)
+configure_file(${CMAKE_CURRENT_SOURCE_DIR}/config.inc.in ${CMAKE_CURRENT_BINARY_DIR}/config.inc)
+include_directories(${CMAKE_CURRENT_BINARY_DIR})
 
 
-configure_file(${CMAKE_CURRENT_SOURCE_DIR}/config.inc.in ${CMAKE_CURRENT_BINARY_DIR}/config.inc)
-
-#SOURCE AND PROGRAMS SECTION
-if(${LIBENGINE})
-    set(engine_output_name "${CMAKE_SHARED_LIBRARY_PREFIX}hwengine${CMAKE_SHARED_LIBRARY_SUFFIX}")
-    set(hwengine_project hwLibrary.pas)
-else()
-    set(engine_output_name "hwengine${CMAKE_EXECUTABLE_SUFFIX}")
-    set(hwengine_project hwengine.pas)
-endif()
-
-if (APPLE)
-    set(required_fpc_version 2.6)
-else()
-    set(required_fpc_version 2.2)
-endif()
-
 set(engine_sources
-    ${hwengine_project}
+    SDLh.pas
+    uSinTable.pas
+    uFloat.pas
+    uConsts.pas
     LuaPas.pas
     PNGh.pas
-    SDLh.pas
-    uAI.pas
-    uAIActions.pas
+    uTypes.pas
+    uUtils.pas
+    uVariables.pas
+    uMisc.pas
+    uConsole.pas
+    uDebug.pas
+    uCommands.pas
+    uInputHandler.pas
+    uTextures.pas
+    uRenderUtils.pas
+    uRender.pas
+    uCaptions.pas
+    uLandTexture.pas
+    uIO.pas
+    uChat.pas
+    uPhysFSLayer.pas
+    uStore.pas
+    uSound.pas
+    uRandom.pas
+    uLocale.pas
+    uStats.pas
+    uCursor.pas
+    uVideoRec.pas
     uAILandMarks.pas
-    uAIAmmoTests.pas
-    uAIMisc.pas
+    adler32.pas
+    uLandTemplates.pas
+    uLandGraphics.pas
+    uLandPainted.pas
+    uLandOutline.pas
+    uLandGenMaze.pas
+    uLandObjects.pas
+    uLand.pas
     uAmmos.pas
-    uCaptions.pas
-    uChat.pas
+
+    uAIMisc.pas
+    uAIActions.pas
+    uAI.pas
+    uWorld.pas
+    uVisualGears.pas
+    uTeams.pas
+
+    uGearsList.pas
     uCollisions.pas
-    uCommands.pas
+    uAIAmmoTests.pas
+    uGears.pas
+    uGame.pas
     uCommandHandlers.pas
-    uConsole.pas
-    uConsts.pas
-    uCursor.pas
-    uDebug.pas
-    uFloat.pas
-    uGame.pas
-    uGears.pas
     uGearsHandlers.pas
     uGearsHandlersRope.pas
     uGearsHedgehog.pas
-    uGearsList.pas
     uGearsRender.pas
     uGearsUtils.pas
-    uIO.pas
-    uInputHandler.pas
-    uLand.pas
-    uLandGenMaze.pas
-    uLandGraphics.pas
-    uLandObjects.pas
-    uLandOutline.pas
-    uLandPainted.pas
-    uLandTemplates.pas
-    uLandTexture.pas
-    uLocale.pas
-    uMatrix.pas
-    uMisc.pas
-    uPhysFSLayer.pas
-    uRandom.pas
-    uRender.pas
-    uRenderUtils.pas
     uScript.pas
-    uSinTable.pas
-    uSound.pas
-    uStats.pas
-    uStore.pas
-    uTeams.pas
-    uTextures.pas
-    uTouch.pas
-    uTypes.pas
-    uUtils.pas
-    uVariables.pas
-    uVideoRec.pas
-    uVisualGears.pas
-    uWorld.pas
+    hwengine.pas
+
     GSHandlers.inc
     VGSHandlers.inc
     ArgParsers.inc
     options.inc
-    adler32.pas
     ${CMAKE_CURRENT_BINARY_DIR}/config.inc
     )
 
-if(${LIBENGINE})
-    message("*** Engine will be built as library (experimental) ***")
-    list(APPEND pascal_flags "-dHWLIBRARY")
-
-    # create position independent code, only required for x68_64 builds, similar to -fPIC
-    if(CMAKE_SIZEOF_VOID_P MATCHES "8")
-        list(APPEND pascal_flags "-Cg")
-    endif(CMAKE_SIZEOF_VOID_P MATCHES "8")
-
-    # due to compiler/linker issues on Max OS X 10.6 -k-no_order_inits is needed to avoid linking fail
-    if(APPLE AND current_macosx_version VERSION_GREATER "10.5")
-        list(APPEND pascal_flags "-k-no_order_inits")
-    endif()
-    set(destination_dir ${target_library_install_dir})
-else(${LIBENGINE})
-    set(destination_dir ${target_binary_install_dir})
-endif(${LIBENGINE})
-
 
 include(${CMAKE_MODULE_PATH}/utils.cmake)
 #opengl 2
@@ -128,138 +89,128 @@
     message(STATUS "Building using OpenGL 2")
 ENDIF(${GL2})
 
-find_package_or_fail(FreePascal)
-
-#when cmake-2.6 support is dropped, this ought to be inside FindFreePascal.cmake
-if (FREEPASCAL_VERSION VERSION_LESS required_fpc_version)
-    message(FATAL_ERROR "Freepascal ${FREEPASCAL_VERSION} is too old, minimum version required is ${required_fpc_version}")
+if (${CMAKE_Pascal_COMPILER_VERSION} VERSION_LESS 2.2 OR # older versions are just ancient
+    (${CMAKE_Pascal_COMPILER_VERSION} VERSION_LESS 2.6 AND APPLE)) # because of 64bit and opengl bindings
+    message(FATAL_ERROR "Your FreePascal installation is too old (fpc ${CMAKE_Pascal_COMPILER_VERSION})!")
+elseif(CMAKE_Pascal_COMPILER_VERSION VERSION_GREATER 2.4)
+    #enable INLINE only with a recent version of fpc
+    add_flag_prepend(CMAKE_Pascal_FLAGS_RELEASE -Si)
 endif()
 
 
 #DEPENDECIES AND EXECUTABLES SECTION
 if(APPLE)
-    string(REGEX MATCH "[pP][pP][cC]+" powerpc_build "${CMAKE_OSX_ARCHITECTURES}")
-    string(REGEX MATCH "[iI]386+" i386_build "${CMAKE_OSX_ARCHITECTURES}")
-    string(REGEX MATCH "[xX]86_64+" x86_64_build "${CMAKE_OSX_ARCHITECTURES}")
-
-    if(powerpc_build)
-        set(powerpc_build "powerpc")
+    if(CMAKE_OSX_ARCHITECTURES)
+        #parse this system variable and adjust only the powerpc syntax to be compatible with -P
+        string(REGEX MATCH "[pP][pP][cC]+" powerpc_build "${CMAKE_OSX_ARCHITECTURES}")
+        string(REGEX MATCH "[iI]386+" i386_build "${CMAKE_OSX_ARCHITECTURES}")
+        string(REGEX MATCH "[xX]86_64+" x86_64_build "${CMAKE_OSX_ARCHITECTURES}")
+        if(x86_64_build)
+            add_flag_prepend(CMAKE_Pascal_FLAGS -Px86_64)
+        elseif(i386_build)
+            add_flag_prepend(CMAKE_Pascal_FLAGS -Pi386)
+        elseif(powerpc_build)
+            add_flag_prepend(CMAKE_Pascal_FLAGS -Ppowerpc)
+        else()
+            message(FATAL_ERROR "Unknown architecture present in CMAKE_OSX_ARCHITECTURES (${CMAKE_OSX_ARCHITECTURES})")
+        endif()
+        list(LENGTH CMAKE_OSX_ARCHITECTURES num_of_archs)
+        if(num_of_archs GREATER 1)
+            message(${WARNING} "Only one architecture in CMAKE_OSX_ARCHITECTURES is currently supported, picking the first one")
+        endif()
+    elseif(CMAKE_SIZEOF_VOID_P MATCHES "8")
+        #if that variable is not set check if we are on x86_64 and if so force it, else use default
+        add_flag_prepend(CMAKE_Pascal_FLAGS -Px86_64)
     endif()
 
     #on OSX we need to provide the SDL_main() function when building as executable
-    if(NOT ${LIBENGINE})
-        add_subdirectory(sdlmain_osx)
-        list(APPEND pascal_flags "-k${LIBRARY_OUTPUT_PATH}/libSDLmain.a")
+    if(NOT BUILD_ENGINE_LIBRARY)
+        add_subdirectory(sdlmain)
+        list(APPEND HW_LINK_LIBS SDLmain)
+        add_flag_append(CMAKE_Pascal_FLAGS -Fl${LIBRARY_OUTPUT_PATH})
     endif()
 
-    #when you have multiple ld installation make sure you get the one bundled with the compiler
-    get_filename_component(compiler_dir ${CMAKE_C_COMPILER} PATH)
-    list(APPEND pascal_flags "-FD${compiler_dir}")
+    #when sysroot is set, make sure that fpc picks it
+    if(CMAKE_OSX_SYSROOT)
+        set(add_flag_append "-XD${CMAKE_OSX_SYSROOT}")
+    endif(CMAKE_OSX_SYSROOT)
 endif(APPLE)
 
+if(FFMPEG_FOUND)
+    add_subdirectory(avwrapper)
+    list(APPEND HW_LINK_LIBS avwrapper)
+    add_definitions(-dUSE_VIDEO_RECORDING)
+    add_flag_append(CMAKE_Pascal_FLAGS -Fl${LIBRARY_OUTPUT_PATH})
+endif()
+
 find_package_or_disable_msg(PNG NOPNG "Screenshots will be saved in BMP")
 if(PNG_FOUND)
     list(REMOVE_AT PNG_LIBRARIES 1) #removing the zlib library path
     get_filename_component(PNG_LIBRARY_DIR ${PNG_LIBRARIES} PATH)
-    list(APPEND pascal_flags "-dPNG_SCREENSHOTS" "-Fl${PNG_LIBRARY_DIR}" "-k-L${PNG_LIBRARY_DIR}")
-endif()
-
-
-#this command is a workaround to some inlining issues present in older FreePascal versions and fixed in 2.6
-if(FREEPASCAL_VERSION VERSION_LESS "2.6")
-    #under some configurations CMAKE_BUILD_TOOL fails to pass on the jobserver, breaking parallel compilation
-    if(UNIX)
-        set(SAFE_BUILD_TOOL $(MAKE))
-    else()
-        set(SAFE_BUILD_TOOL ${CMAKE_BUILD_TOOL})
-    endif()
-    add_custom_target(ENGINECLEAN COMMAND ${SAFE_BUILD_TOOL} "clean" "${PROJECT_BINARY_DIR}" "${CMAKE_CURRENT_SOURCE_DIR}")
+    add_flag_append(CMAKE_Pascal_FLAGS -Fl${PNG_LIBRARY_DIR})
 endif()
 
-
-if(${FFMPEG_FOUND})
-    # TODO: this check is only for SDL < 2
-    # fpc will take care of linking but we need to have this library installed
-    find_package(GLUT REQUIRED)
-
-    #TODO: convert avwrapper to .pas unit so we can skip this step
-    include_directories(${FFMPEG_INCLUDE_DIR})
-    list(APPEND pascal_flags "-dUSE_VIDEO_RECORDING")
-    if(WIN32)
-        # there are some problems with linking our avwrapper as static lib, so link it as shared
-        add_library(avwrapper SHARED videorec/avwrapper.c)
-        target_link_libraries(avwrapper ${FFMPEG_LIBRARIES})
-        install(PROGRAMS "${EXECUTABLE_OUTPUT_PATH}/${CMAKE_SHARED_LIBRARY_PREFIX}avwrapper${CMAKE_SHARED_LIBRARY_SUFFIX}" DESTINATION ${target_library_install_dir})
-        list(APPEND pascal_flags "-dUSE_VIDEO_RECORDING")
-    else()
-        add_library(avwrapper STATIC videorec/avwrapper.c)
-    endif()
+if(LUA_FOUND AND LUA_SYSTEM)
+    get_filename_component(LUA_LIBRARY_DIR ${LUA_LIBRARY} PATH)
+    get_filename_component(LUA_LIBRARY_NAME ${LUA_LIBRARY} NAME)
+    #NAME_WE would strip the .1 (or .2) next to the ".so"
+    string(REGEX REPLACE "${CMAKE_SHARED_LIBRARY_PREFIX}(.*)${CMAKE_SHARED_LIBRARY_SUFFIX}" "\\1" LUA_LIBRARY_NAME "${LUA_LIBRARY_NAME}")
+    add_flag_append(CMAKE_Pascal_FLAGS "-Fl${LUA_LIBRARY_DIR} -XLAlua=${LUA_LIBRARY_NAME}")
+else()
+    add_definitions(-dLUA_INTERNAL)
+    list(APPEND HW_LINK_LIBS lua)
+    add_flag_append(CMAKE_Pascal_FLAGS "-XLAlua=${lua_output_name}")
 endif()
 
 
-set(fpc_flags ${pascal_flags} ${hwengine_project})
+if(NOT PHYSFS_FOUND)
+    add_definitions(-dPHYSFS_INTERNAL)
+    list(APPEND HW_LINK_LIBS physfs)
+    #-XLA is a beta fpc flag that renames libraries before passing them to the linker
+    #we also have to pass PHYSFS_INTERNAL to satisfy windows runtime requirements
+    #(should be harmless on other platforms)
+    add_flag_append(CMAKE_Pascal_FLAGS "-Fl${LIBRARY_OUTPUT_PATH} -XLAphysfs=${physfs_output_name}")
+endif()
+list(APPEND HW_LINK_LIBS physlayer)
+
+#Mix_Init/Mix_Quit from SDL_mixer 1.2.10
+check_library_exists(${SDLMIXER_LIBRARY} Mix_Init "" HAVE_MIXINIT)
+if(HAVE_MIXINIT)
+    add_definitions(-dSDL_MIXER_NEWER)
+endif(HAVE_MIXINIT)
 
-if(NOT APPLE)
-    #here is the command for standard executables or for shared library
-    add_custom_command(OUTPUT "${EXECUTABLE_OUTPUT_PATH}/${engine_output_name}"
-        COMMAND "${FREEPASCAL_EXECUTABLE}"
-        ARGS ${fpc_flags} -o${engine_output_name}
-        DEPENDS ${engine_sources}
-        WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-        )
+#IMG_Init/IMG_Quit from SDL_image 1.2.8
+check_library_exists(${SDLIMAGE_LIBRARY} IMG_Init "" HAVE_IMGINIT)
+if(HAVE_IMGINIT)
+    add_definitions(-dSDL_IMAGE_NEWER)
+endif(HAVE_IMGINIT)
+
+#needs to be last
+add_definitions(-dDEBUGFILE)
+
+#SOURCE AND PROGRAMS SECTION
+if(BUILD_ENGINE_LIBRARY)
+    message(${WARNING} "Engine will be built as library (experimental)")
+    if(APPLE AND current_macosx_version VERSION_GREATER "10.5")
+        # due to compiler/linker issues on Max OS X 10.6 -k-no_order_inits is needed to avoid linking fail
+        add_flag_prepend(CMAKE_Pascal_FLAGS "-k-no_order_inits")
+    endif()
+
+    #workaround for missing <TARGET> support during object generation
+    set(engine_output_name "${CMAKE_SHARED_LIBRARY_PREFIX}hwengine${CMAKE_SHARED_LIBRARY_SUFFIX}")
+    set(destination_dir ${target_library_install_dir})
+    add_flag_prepend(CMAKE_Pascal_FLAGS "-o${LIBRARY_OUTPUT_PATH}/${engine_output_name}")
+
+    add_definitions(-dHWLIBRARY)
+    add_library(hwengine SHARED ${engine_sources} hwLibrary.pas)
 else()
-    #these are the dependencies for building a universal binary on Mac OS X
-    foreach (build_arch ${powerpc_build} ${i386_build} ${x86_64_build})
-        list(APPEND lipo_args_list "${EXECUTABLE_OUTPUT_PATH}/hwengine.${build_arch}")
-        add_custom_command(OUTPUT "${EXECUTABLE_OUTPUT_PATH}/hwengine.${build_arch}"
-            COMMAND "${FREEPASCAL_EXECUTABLE}"
-            ARGS ${fpc_flags} -ohwengine.${build_arch} -P${build_arch}
-            DEPENDS ${engine_sources}
-            WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-            )
-        add_custom_target(hwengine.${build_arch} ALL DEPENDS "${EXECUTABLE_OUTPUT_PATH}/hwengine.${build_arch}")
-        add_custom_command(TARGET hwengine.${build_arch} POST_BUILD
-            COMMAND "install_name_tool"
-            ARGS -id @executable_path/../Frameworks/${engine_output_name}
-                ${EXECUTABLE_OUTPUT_PATH}/hwengine.${build_arch}
-            )
-    endforeach()
-
-    add_custom_command(OUTPUT "${EXECUTABLE_OUTPUT_PATH}/${engine_output_name}"
-        COMMAND "lipo"
-        ARGS ${lipo_args_list} -create -output ${EXECUTABLE_OUTPUT_PATH}/${engine_output_name}
-        DEPENDS ${lipo_args_list}
-        )
+    # no need to change name here because target has same name
+    set(engine_output_name "hwengine${CMAKE_EXECUTABLE_SUFFIX}")
+    set(destination_dir ${target_binary_install_dir})
+    add_executable(hwengine ${engine_sources})
 endif()
 
-
-add_custom_target(hwengine ALL DEPENDS "${EXECUTABLE_OUTPUT_PATH}/${engine_output_name}")
-
-#when system Lua is not found we need to compile it before engine
-if(NOT LUA_FOUND)
-    add_dependencies(hwengine lua)
-endif()
-
-# same for physfs
-if(NOT PHYSFS_FOUND)
-    add_dependencies(hwengine physfs)
-endif()
-
-add_dependencies(hwengine physlayer)
-
-#when ffmpeg/libav is found we need to compile it before engine
-#TODO: convert avwrapper to .pas unit so we can skip this step
-if(${FFMPEG_FOUND})
-    add_dependencies(hwengine avwrapper)
-endif()
-
-if(APPLE)
-    add_dependencies(hwengine SDLmain)
-endif(APPLE)
-
-#this command is a workaround to some inlining issues present in older FreePascal versions and fixed in 2.6
-if((FREEPASCAL_VERSION VERSION_LESS "2.6") AND (NOT ${FFMPEG_FOUND}))
-    add_dependencies(hwengine ENGINECLEAN)
-endif()
+#even though not actually used, this will trigger relink if any lib changes
+target_link_libraries(hwengine ${HW_LINK_LIBS})
 
 install(PROGRAMS "${EXECUTABLE_OUTPUT_PATH}/${engine_output_name}" DESTINATION ${destination_dir})